Investigation of Wear Behavior of 1060 and 1095 Steels using Regression Analysis

Nasir Hussain Al Katib, Jamal

doi:10.30684/etj.33.3A.19

	Investigation of Wear Behavior of 1060 and 1095 Steels using Regression Analysis
Engineering and Technology Journal
Article 1, Volume 33, 3A, 2015, Pages 753-761 PDF (204.33 K)
DOI: 10.30684/etj.33.3A.19
Author
Jamal Nasir Hussain Al Katib
Abstract
The dry adhesive wear behavior of 1 060 and 1095 steels using pin on wheel wear test rig at room temperature under different wear conditions has been studied. The prepared specimens are normalized to make sure that all specimens are in the same conditions. 'The objective of this research is to study the effect of operating parameters such as rotating speed , normal load and sliding time and their interaction on the wear behavior using regression analysis. Detailed data obtained were used to develop equations to describe the wear rate of steels. The wear losses of the specimens were expressed in terms of simultaneous contribution from the effects of rotating speed , normal load , sliding time and their interaction. By applying the parameters such as rotating speed , normal load , and sliding time,it is observed that certain effects on the wear behavior of two types steel , the 1060 steel , sliding time is the main factor, followed by normal load and rotating speed . However ,for the 1095 steel , rotating speed i s the main factor, followed by normal load and sliding time. From results, it was concluded that the wear behavior of these steels and the effects of these parameters on the wear depend on the physical and mechanical properties of these types of steels.
Keywords
Wear behavior; Wear equations; Regression analysis; Dry sliding; and; operating parameters

Statistics Article View: 385 PDF Download: 242