- All Journals
- Al-Qadisiyah University
- Basrah University
- Kirkuk University
- Mosul University
- The Iraqi Borad for Medical Specialization
- University of Anbar
- University of Technology
- Al Mustafa University
- Al-Zahraa University for Women
- Alnoor University
- Kunooz University
- Misan University
- Ninevah University
- Tikrit University
- University of Al-Hamdaniya
- University of Kerbala
Influence of Machining Parameters on Surface Roughness in Chemical Machining of Stainless Steel 304 | ||
| Engineering and Technology Journal | ||
| Article 1, Volume 33, 6A, 2015, Pages 1377-1388 PDF (304.2 K) | ||
| DOI: 10.30684/etj.33.6A.8 | ||
| Authors | ||
| Saad K. Shather; Ali Ibrahim | ||
| Abstract | ||
| Chemical machining is a well-known nontraditional machining process and is the controlled chemical dissolution of the machined work piece material by contact with a strong acidic or alkaline chemical reagent. It is also called as chemical etching. The present work is aimed at studying the effect of machining time, machining temperature, etching solution concentration on the surface finish of stainless steel 304 using mixed of acids (HCL+HNO3+HF+ H2SO4+H2O). Alloy samples are of (33×33×6) mm dimensions. Three machining temperatures (45, 50 and 55 ºC) for each of which three machining times (3, 6, and 9 min) were used as machining conditions. Surface roughness increases with the machining temperature and machining time. An assessment of CHM was achieved by empirical models for selecting the appropriate machining conditions of the required surface finish. The models were designed based on multiple regression method via Mtb 16 software. | ||
| Keywords | ||
| CHM; Stainless Steel; roughness; Regression | ||
|
Statistics Article View: 377 PDF Download: 226 |
||