- All Journals
- Al-Qadisiyah University
- Basrah University
- Kirkuk University
- Mosul University
- The Iraqi Borad for Medical Specialization
- University of Anbar
- University of Technology
- Al Mustafa University
- Al-Zahraa University for Women
- Alnoor University
- Kunooz University
- Misan University
- Ninevah University
- Tikrit University
- University of Al-Hamdaniya
- University of Kerbala
Behavior of Reinforced Lightweight Concrete Two Way Slabs Strengthened With CFRP Sheets | ||
| Engineering and Technology Journal | ||
| Article 1, Volume 33, 8A, 2015, Pages 1813-1829 PDF (813.23 K) | ||
| DOI: 10.30684/etj.2015.108825 | ||
| Author | ||
| Mazen D.Abdulah | ||
| Abstract | ||
| The principal objective of this paper is to investigation experimental and theoretical of flexural behavior of reinforced light weightconcrete two-way slabs strengthened or repaired with externally bonded carbon fiber reinforced polymer (CFRP) sheets. The experimental work includes testing of eight reinforced concrete slab specimens with dimensions (1050mmx1050mmx600mm), five of these slabs were strengthened, three slabs were repaired with carbon fiber reinforced polymer (CFRP) strips and one specimen was tested without strengthening acts as reference slab (control) for comparing the performance of CFRP strengthened or repaired slabs. The experimental variables considered in the test program include the quantity and shape of CFRP sheets. All the reinforced concrete slab specimens were designed of the same dimensions and reinforced identically to fail in flexure. All slabs had been tested in simply supported conditions subjected to central concentrated load.The experimental results show that the ultimate loads are increased by about (7-45%) for the slabs strengthened with bonded CFRP sheets with respect to the unstrengthened reinforced concrete slab (control slab). Three-dimensional nonlinear finite element analysis has been used to conduct the numerical investigation of the general behavior of strengthened slabs. ANSYS (Version 13.0) computer software was used in this work.Eight-node brick elements (SOLID65) are used to represent the concrete and three dimensional shell elements (SHELL 41) are used to represent the CFRP strips in the finite element analysis model. Perfect bond between the concrete surface and the bonded CFRP sheets is assumed. | ||
|
Statistics Article View: 369 PDF Download: 207 |
||