- All Journals
- Al-Qadisiyah University
- Basrah University
- Kirkuk University
- Mosul University
- The Iraqi Borad for Medical Specialization
- University of Anbar
- University of Technology
- Al Mustafa University
- Al-Zahraa University for Women
- Alnoor University
- Kunooz University
- Misan University
- Ninevah University
- Tikrit University
- University of Al-Hamdaniya
- University of Kerbala
Behavior and Strength of Concentrically Loaded Flat Slabs Using Self-Compacting High Strength Concrete With and Without Openings with Steam Curing | ||
| Engineering and Technology Journal | ||
| Article 18, Volume 34, 3A, 2016, Pages 648-663 PDF (1018.9 K) | ||
| DOI: 10.30684/etj.34.3A.18 | ||
| Author | ||
| Esraa Khudhair Mohsin Abuzaid | ||
| Abstract | ||
| Openings in slabs are usually required for plumbing, fire protection pipes, and ventilation ducts and air conditioning. This study presents an experimental investigation on the influence of openings on the punching shear strength of high reinforced concrete flat plates. Five models of slab-column connection of (1000 x 1000 x 70mm) simply supported along the four edges are tested. The slabs are loaded concentrically by a central stub column. The main variables studied are the size(100x100mm and 200x100mm)and location(at 35 mm , at 135mm from center of slab and at the corner of slab) of the openings and used steam curing method. Experimental results are recorded and studied at various stages of loading, deflection at the center of the slab, at distance (150mm) from the center of the slab in two directions and at the edge of the tested slab out of support. First cracking load and ultimate load capacity are also recorded. | ||
| Keywords | ||
| Self; Compacting Concrete; High strength R; Openings in slabs; Steam curing; Effect of size and location of openings and Critical section b | ||
|
Statistics Article View: 407 PDF Download: 229 |
||