- All Journals
- Al-Qadisiyah University
- Basrah University
- Kirkuk University
- Mosul University
- The Iraqi Borad for Medical Specialization
- University of Anbar
- University of Technology
- Al Mustafa University
- Al-Zahraa University for Women
- Alnoor University
- Kunooz University
- Misan University
- Ninevah University
- Tikrit University
- University of Al-Hamdaniya
- University of Kerbala
Comparative Evaluation of the Dimensional Accuracy of Different Putty-Wash Techniques Using Additional Silicon Impression Material In Vitro Study | ||
| Al-Rafidain University College For Sciences | ||
| Article 1, Volume 0, Issue 38, 2017, Pages 141-161 | ||
| Author | ||
| Nada Ali Mahdi | ||
| Abstract | ||
| Purpose: The aim of the present study was to evaluate and compare the dimensional accuracy of stone models made by addition silicone impression material using three putty- wash impression techniques: one step putty wash (dual viscosity), two step and modified two step putty wash technique. Material and Methods: A stainless steel master model was constructed simulating a three-unit fixed prosthesis. Fifteen impressions were make of this master model with each impression technique. The first technique, one step dual viscosity was made with putty in the tray and light body on brass dies and impression was make. The second technique, two step putty/wash, the first step using putty on the tray with acrylic spacer on the dies and impression was make then followed by loading wash material on the dies and reseating the first impression in the second step. The third technique, modified two step made using putty/light body as in the first technique then a hole was made at the edge of two abutments in the polymerized impression, then light body was loaded into the tray and over the model and the tray is reseated. Total of forty five impressions were obtained and casts poured using type IV stone. The accuracy of these casts measured using a travelling microscope. Three dimensions diameter, height, and interabutment distances measurements were obtained and statistical analysis was done using paired T-test, One way ANOVA, and Least Significant Difference (LSD) tests. Result: Showed that a significantly larger dimensions of the resultant stone casts of all techniques in comparison to the master model (P Keywords Impression Techniques --- Stone Casts --- Dimensional Accuracy --- تقنيات الطبعة --- القوالب الجبسية --- دقة الأبعاد. | ||
| Keywords | ||
| Impression Techniques; Stone Casts; Dimensional Accuracy | ||
|
Statistics Article View: 177 PDF Download: 31 |
||