- All Journals
- Al-Qadisiyah University
- Basrah University
- Kirkuk University
- Mosul University
- The Iraqi Borad for Medical Specialization
- University of Anbar
- University of Technology
- Al Mustafa University
- Al-Zahraa University for Women
- Alnoor University
- Kunooz University
- Misan University
- Ninevah University
- Tikrit University
- University of Al-Hamdaniya
- University of Kerbala
STUDY OF THERMAL CONDUCTIVITY OF UNSTATURATED POLYESTER REINFORCED BY POLYPROPYLENE FIBERS | ||
| Journal of University of Anbar for Pure Science | ||
| Article 35, Volume 9, Issue 3, 2015, Pages 224-228 PDF (813.82 K) | ||
| Document Type: Research Paper | ||
| DOI: 10.37652/juaps.2015.127652 | ||
| Authors | ||
| Anmar Sh. Jasim* ; Faik H. Anter | ||
| University of Anbar - College of Science | ||
| Abstract | ||
| In this research has been manufacture of overlapping polymer of unsaturated polyester resin Reinforced by polypropylene fibers (PPF) with ratio weight , (0,4,6,8,10) gm from polypropylene fibers . And at room temperature it has been studied the thermal conductivity properties of this compound and identified practical results that the thermal conductivity in natural conditions decreases with increasing the ratio by mass of fibers of polypropylene in the compound, and the thermal conductivity values continue decreasing as ratio strengthened polyethylene fibers of polypropylene in the compound. Immersion and the solution of acid, the value of the thermal conductivity of all the samples increases with increasing duration of immersion in the acid solution, and when comparing the thermal conductivity values for samples with a period of immersion in the solution of acid with the dry state is evident that the difference in The increase in the value of thermal conductivity between the dry case and the case of immersion in acid solution increases whenever a period of immersion increased with the increase in the proportion of reinforcement fibers of polypropylene. | ||
| References | ||
|
[1] F.W. Billmeyer, “Text book Polymer Science”, John Wiley and Sons, Inc. New York, 1971.
[2] R. J. Crawford, “Plastics Engineering”, 2nd Edition, Pergamon Press, New York, 1987.
[3] James P. Schaffer, Ashok Saxena, “The Science and Design of Engineering Materials”, Richard D. Irwin, Inc., 1995.
[4] D. Hull, “An Introduction to Composite Materials”, Cambridge University Press, First Pub. 1981.
[5] Theodore J. Reinhart, etal., “Engineered Materials Hand Book”, Volume 1, Composites, Asm International, 1988.
[6] N. G. Mccrum, C. P. Buckley and C. B. Bucknall, “Principles of Polymer Engineering”, 2nd Edition, John Wiley & Sons, New York, 1997.
[7] نجلاء رشدی محمد علیان، "تصنیع ودارسة الخواص المیکانیکیة والحراریة لخلطات بولیمریة واخرى مدعمة"، رسالة دکتوراه، قسم العلوم التطبیقیة -الجامعة التکنولوجیة، 2002. [8] EzioMartuscelli, Rosario Palumbo, “Polymer Blends”, New York, 1980.
[9] بلقیس محمد ضیاء الدباغ " تسلیح ودراسة خواص راتنجی الایبوکسی والبولی استر غیر المشبع " رسالة دکتوراة، قسم العلوم التطبیقیة، الجامعة التکنولوجیة،1996. [10] J. Kroschwitz, "Encyclopedia of Polymer Science and Engineering", Vol.12, pp.(256-257), 1985.
[11].(1994) د. علی الأشرم، " اللدائن وخواصها التکنولوجیا "، جامعة الأسکندریة، [12] P. Kalenda," Diffusion of Acids into Epoxy Resin Composition", Journal of
Applied Polymer Science, Vol.45, No.12, 1992.
[13] C.A. Dostaland M.S. Woods," Engineering materials Hand Book ",1987.
| ||
|
Statistics Article View: 513 PDF Download: 207 |
||