- All Journals
- Al-Qadisiyah University
- Basrah University
- Kirkuk University
- Mosul University
- The Iraqi Borad for Medical Specialization
- University of Anbar
- University of Technology
- Al Mustafa University
- Al-Zahraa University for Women
- Alnoor University
- Kunooz University
- Misan University
- Ninevah University
- Tikrit University
- University of Al-Hamdaniya
- University of Kerbala
Evaluation of the effect of Poly Vinyl Pyrrolidone addition on the shear bond strength of acrylic resin artificial teeth to heat cured acrylic resin denture base material | ||
| Journal of baghdad college of dentistry | ||
| Article 1, Volume 23, Issue 1, 2011, Pages 1-7 | ||
| Authors | ||
| Nabeel Abdul-Fattah; Aula K. Rafeeq | ||
| Abstract | ||
| ABSTRACTBackground: The most common materials used for fabrication of denture bases are poly methyl methacrylate(PMMA). Fracture or debonding of plastic teeth from denture base are common clinical problems which are facingboth the patient and the dentist. The aim of this study is to evaluate and compare the shear bond strength ofacrylic resin artificial teeth treated by different chemical surface treatments (solvents like acetone & thinner) to theexperimental prepared material and to the control material before and after thermocycling.Materials and methods: Preparation of modified heat cured denture base acrylic resin was carried out by preparingof (PMMA) (80%) and poly vinyl pyrrolidone (PVP) (20%) and the liquid part composed of methyl methacrylate(MMA) monomer. Control: poly methyl methacrylate (PMMA) + methyl methacrylate ( MMA ) as control group ( 2.5: 1 ) by weight (1). Experimental: PMMA (80% ) + PVP ( 20% ) + MMA as experimental group ( 2.5 : 1 ) by weight. Sixtyartificial acrylic teeth were prepared and cured by control and experimental denture base acrylic resin, then teethwere divided into three groups and treated with different surface treatment; first group received no furthertreatment (control), second group treated with acetone and third group treated with thinner. The denture teethwere flasked and wax was eliminated with running hot water. Denture resin was packed and cured according tomanufacturer's instructions and specimens were deflasked upon the completion of resin processing. Then half ofspecimens from all surface treatments were tested by using Instron machine and subjected to shear force untilfailure. The other half of specimens which also include the surface treatments groups were thermocycled. Teethsurfaces after treatment and fracture sites were examined and photographed visually and under reflecting lightmicroscope.Results: The results showed that all surface treatments produced significantly high improvement in shear bondstrength (SBS). Control group had shown significantly lower (SBS) than experimental group bonded to artificial acrylicteeth. On the other hand, experimental denture base resin bonded to artificial acrylic teeth were affected moresignificantly by thermocycling than the same teeth bonded to control denture base resin. Results indicated thatthinner treatment for acrylic teeth is recommended prior to denture base processing.Conclusion: higher SBS of artificial acrylic teeth bonded to experimental denture bases rather than to controldenture bases.Key words: Poly Vinyl Pyrrolidone, Shear Bond Strength and thermocycling. (J Bagh Coll Dentistry 2011;23(1):1-7). | ||
|
Statistics Article View: 104 PDF Download: 84 |
||