- All Journals
- Al-Qadisiyah University
- Basrah University
- Kirkuk University
- Mosul University
- The Iraqi Borad for Medical Specialization
- University of Anbar
- University of Technology
- Al Mustafa University
- Al-Zahraa University for Women
- Alnoor University
- Kunooz University
- Misan University
- Ninevah University
- Tikrit University
- University of Al-Hamdaniya
- University of Kerbala
EXPERIMENTAL STUDY OF HEAT TRANSFER OF AXISYMMETRIC AIR IMPINGEMENT FROM AN ORIFICE ON A MODIFIED SURFACE | ||
| Journal of Engineering and Sustainable Development | ||
| Article 1, Volume 20, Issue 2, 2016, Pages 55-81 | ||
| Authors | ||
| Adnan A. Abdul Rasool; Hadel Abdulhadi Jassim | ||
| Abstract | ||
| : Impingement cooling jet is widely used in different industrial applications due to high rate of heat removal on the surface being subjected to impinging. Ribs are used to enhance convective heat transfer by the promotion of higher turbulence levels. The aim of present work is to perform an experimental verification of the using modified surface with ribs on heat transfer enhancement. Experiments were performed to characterize heat transfer to a normally impinging air jet on uniformly heated surfaces modified with ribs from a single orifice of different diameters D of (5, 12, 20 mm). A centrifugal blower is used for air impinging with jet velocity in the range (18.4-36 m/s). Local heat transfer distribution on the impingement surface is investigated for orifice-to-plate spacing ratio (Z/D) of (4, 6, 8, 10) using thermal infrared imaging technique. Different configurations of modified surfaces in form of ribs surface are studied in the present work which are: rectangular ribs, and circular ribs with different sizes spaced at different pitch on the target ribbed surface. Heat transfer enhancement for five rib geometries is evaluated by comparison with results for a smooth flat surface. The enhancement ratio of heat transfer, as compared to the smooth flat surface is demonstrated by a factor ranging from 1.2 to 3. It is observed that the different shape of the ribs cause different effects on heat transfer coefficient between the impinging air jet and the target plate. Also it is found that the orifice diameter, orifice to plate spacing ratio and jet velocity are the most effective variable which characterizes the heat removal rate. | ||
| Keywords | ||
| Impingement jet cooling; Rib roughened wall; Heat transfer enhancement | ||
|
Statistics Article View: 66 PDF Download: 42 |
||