- All Journals
- Al-Qadisiyah University
- Basrah University
- Kirkuk University
- Mosul University
- The Iraqi Borad for Medical Specialization
- University of Anbar
- University of Technology
- Al Mustafa University
- Al-Zahraa University for Women
- Alnoor University
- Kunooz University
- Misan University
- Ninevah University
- Tikrit University
- University of Al-Hamdaniya
- University of Kerbala
Improvement of White Duekhla Clay properties by using Low-Density Polyethylene Fillers to use it in ceramic industries | ||
| Journal of University of Anbar for Pure Science | ||
| Article 14, Volume 10, Issue 3, 2016, Pages 69-75 PDF (1.14 M) | ||
| Document Type: Research Paper | ||
| DOI: 10.37652/juaps.2016.135144 | ||
| Authors | ||
| SAMIR A. AWAD* ; EMAN M. KHALAF | ||
| University of Anbar - College of Education for Pure Sciences | ||
| Abstract | ||
| The research was summarized in preparation and make samples of the ceramic body that are filled with Low-Density Polyethylene particles.The composite materials were manufactured by using ( Duekhla White Caly with Polymer particles) for purposes of improving the properties of clay for ceramic uses. The samples were prepared from The white Duekhla clay with fixed particle size (150µm) as a matrix and adding polymer powder particles (50µm) as fillers by different ratios in the range (2, 4, 6, 8, 10) %. Some essential materials such as feldspar and the fluvial sand. The results that were obtained from tests showed that higher contents of low-density polyethylene(LDPE) and that were added to the ceramic mixture gave good results and significant improvements for water absorbance resistance and less thermal conductivity. The mechanical properties of ceramic composites were improved by a higher ratio when adding (10%) of LDPE to ceramic composites. For example, the tensile strength was increased by an amount (175.5MPa) for the addition ratio (10%), compared with the pure sample (133MPa). The results of water absorbance and thermal conductivity decreased with increasing of the addition ratio for LDPE fillers. All obtained results indicated to the possibilities of improving the quality of the used clay in the ceramic industry for increasing the plasticity and disappear some disadvantages that were observed during the tests that were obtained on them | ||
| References | ||
|
-1مجاهد ، د. محمد وبکر ،د. محمد یوسف ، "مبادئ فی الکیمیاء الصناعیة للمهندسین" ، دار الراتب الجامعیة 1984. 2. Glews, F.H, "Heavy Technology," The British ceramic research association, 2nd ED., Academic press 1969. 3. Singer, Felix, singer son jas,"industrial ceramics chemical", publishing co, lnc. Newyork, 1971 4- Narayan RJ, Kumta PN, Sfeir C, Lee DH, Choi D, Olton D. Nanostructured ceramics in medical devices: applications and prospects. JOM-J Minerals, Metals Mater Soc. 2004; 56(10):38–43. 5-W.D.Gallister, “Materials Science and Engineering", 5th ed., JohnWiley,U.S.A,(2000) Birgoran, B. J. Mater. Sci. Lett.(2003) 21:1121-1124 6. Ryan, W. & Fric, C., "Properties of Ceramic Raw Materials", John Wiley and Sons, INC, New York, (1967). 7. Chaim R. Plastic deformation in impure noncrystalline ceramics: a model. Sic Mater. 2001; 44(8– 9):1523–1527. 8- P. Blaszczak, W. Brostow, T. Datashvili and H. E. Hagg Lobland, Rheology of low-density polyethylene+Boehmite composites, Polym. Compos. 31, pp. 1909-1913, 2010. 9- R.W. Rice. Mechanical Properties of Monolithic and Composite Ceramics, Grain and Particle Effects. New York. 10- E.P. Rothman, J.P. Clark, H.K. Bowen. Cost modeling of structural ceramics. Adv. Cer. Mats. 2(1):34-38, 1987. | ||
|
Statistics Article View: 530 PDF Download: 299 |
||