- All Journals
- Al-Qadisiyah University
- Basrah University
- Kirkuk University
- Mosul University
- The Iraqi Borad for Medical Specialization
- University of Anbar
- University of Technology
- Al Mustafa University
- Al-Zahraa University for Women
- Alnoor University
- Kunooz University
- Misan University
- Ninevah University
- Tikrit University
- University of Al-Hamdaniya
- University of Kerbala
Effecting of pH Parameter on Simulated Wastewater Treatment Using Electrocoagulation Method | ||
| Journal of Engineering | ||
| Article 1, Volume 24, Issue 4, 2018, Pages 73-88 | ||
| Authors | ||
| ; Wadood T. Mohammed | ||
| Abstract | ||
| The aim of the present research is to investigate the effecting of pH parameter on the feasibility of lead removal from simulated wastewater using an electrochemical system. Electrocoagulation method is one of electrochemical technology which is used widely to treat industrial wastewater. Parameters affecting this operation, such as initial metal concentration, applied current, stirrer speed, and contact time of electroprocessing were taken as 155ppm, 1.5 Ampere, 150 rpm, 60 minutes respectively. While pH of the simulated wastewater was in the range of 2 to 12 in the experiments. It was found from the results that pH is an important parameter affecting lead removal operation. The best value of pH parameter is approximately (9.50) that gave higher removal efficiency larger than (99%). | ||
| Keywords | ||
| Heavy metals; wastewater treatment; electrocoagulation; pH parameter | ||
|
Statistics Article View: 139 PDF Download: 77 |
||