Hammad Anter, F., Dhari Mahmoud, K. (2018). Effect of number of Kevlar fiber layers on bending property of thermoplast blend. , 11(3), 111-116. doi: 10.37652/juaps.2017.145244
Faik Hammad Anter; Khamees Dhari Mahmoud. "Effect of number of Kevlar fiber layers on bending property of thermoplast blend". , 11, 3, 2018, 111-116. doi: 10.37652/juaps.2017.145244
Hammad Anter, F., Dhari Mahmoud, K. (2018). 'Effect of number of Kevlar fiber layers on bending property of thermoplast blend', , 11(3), pp. 111-116. doi: 10.37652/juaps.2017.145244
Hammad Anter, F., Dhari Mahmoud, K. Effect of number of Kevlar fiber layers on bending property of thermoplast blend. , 2018; 11(3): 111-116. doi: 10.37652/juaps.2017.145244

Effect of number of Kevlar fiber layers on bending property of thermoplast blend

Journal of University of Anbar for Pure Science
Article 29, Volume 11, Issue 3, 2017, Pages 111-116    PDF (689.87 K)
Document Type: Research Paper
DOI: 10.37652/juaps.2017.145244
Authors
Faik Hammad Anter; Khamees Dhari Mahmoud
college e College of Science, University of Anbar
Abstract
This research includes preparation hybrid material by reinforcing the blend (EP80%+UPE20%) with number of Kevlar fiber layers by hand lay-up method and volume fraction 30% . Bending property was studied at room temperature before and after (UV) irradiation Expermental results showed that ,the value of deflection decreases with increasing the number of reinforcing Kevlar fiber layers while modulus of elasticity increases with increasing the number of reinforcing layers before and after UV irradiation .
References
  1. M.A.Megers, krishan kumar chalwla" Mechanical Behavior of Materials " ,Prentice Hall,New Jersey ,(1999).
  2. علی هوبی حلیم " تحسین خواص المواد اللدائنیة المقساة " ، رسالة ماجستیر ، جامعة بابل ، (1999 ).
    1. W.D.Callister , " Materials science & Engineering An Introduction", Jown wiley & sons , Inc , (2003).
    2. "Mechanical Properties of Composites Based on Low Styrene Emission polyester Resins for Marine Application ", Christophe Baley , Y . Perrot, peter Davies, Journal of Applied Composite Materials ,Vol. 13,No. 1, January ,pp.(1-22),(2006) .
    3. لمیس علی خلف "دراسة الخصائص المیکانیکیة والفیزیائیة لمتراکبات البولی أستر غیر المشبعة والمدعمه بالیاف الزجاج والنایلون "، رساله ماجستیر، قسم هندسة المواد ، الجامعه التکنولوجیة ، (2006) .
      1. R.A.Higgins, "Materials for Engineering and Technicas", Elsevier Ltd,(2006).
      2. H.W.Abdullah,H.I.Jaffa and K.R.Al-Rawi" Study of Bending Property for Epoxy / Kevlar-Class Fibers and Hybrid Composite" Eng.Tech.Journal,Vol.33,Part(B),No.9,(2015).
      3. Hibbeler R.C, "Mechanics of Materials", 6th Ed, Pearson prentice Hall, (2005).
      4. J.  Delmont, "Technology of Carbon & Graphite Fiber composite", Van Nostr & Reinhold Co/ New York, (1981).
      5. R. Donald .Askeland & Pradeep P. Phule ,"The  Science &Engineering Of  Material " 4th ed. PWC , (2006).
11. G.R.J" Plastic Engineering.2nd ed.,Pergomol press,U.K ,(1987).

12. A.D. Sarkar, "Friction and Wear", Academic press, Inc. , London, (1980).

13. J. Wiley and Sons, Inc., " Encyclopedia of polymer Science and Technology", Vol. 6, U.S.A,( 1967).

14. A.Brent Strong ," Plastic Materials and Processing",2nd ed,ytisrevinU gnuoY mahgirB  (2000).     

  1. بلقیس محمد ضیاء* حسن شاکر مجدی** ورغد حسین محمد "دراسة تاثیر الاشعة فوق البنفسجیة (UV)على بعض الخصائص المیکانیکة لمتراکبات الایبوکسی" مجلة الهندسة والتکنولوجیا المجلد 27 العدد 15(2009).
Statistics
Article View: 321
PDF Download: 220


Journal Management System. Powered by iJournalPro.com