- All Journals
- Al-Qadisiyah University
- Basrah University
- Kirkuk University
- Mosul University
- The Iraqi Borad for Medical Specialization
- University of Anbar
- University of Technology
- Al Mustafa University
- Al-Zahraa University for Women
- Alnoor University
- Kunooz University
- Misan University
- Ninevah University
- Tikrit University
- University of Al-Hamdaniya
- University of Kerbala
Manufacture and Testing of a Device for Measuring the Pellet Feed Durability Under the Effect of Air Pressure | ||
| Journal of Tikrit University For Agriculture Sciences | ||
| Article 1, Volume 18, Issue 2, 2018, Pages 9-16 | ||
| Author | ||
| Basim Aboud Abbas AL-Shemary | ||
| Abstract | ||
| Making device to measure the durability feed pellet under the effect of air pressure and then tested and compared with the measurement device the durability of the feed pellet with tumbling can where durability is the most important indicator in determining the quality of those pellet, Included air blower device manufacturing connected with the discharge tube hole status curved from top to bottom part, the lower link with the discharge of blower hole either the upper link with funnel has been provided by the conical funnel bottom clip wired suppression cone on a rubber body for awarding me has put a hole after the upper lid and body rubber hole from the bottom side to install the air tube and attribution and delivery to hole crystal, Cover Suppression of the Supreme semi-conical sieve provider of top cover as a sieve last put it to increase the weight on the first conical sieve and not removed by the air force payment. Tested the device by feed pellet was manufactured with two variables to control the circumstances of its production and two holes forming and heat the feed water and compared their impact on the pellet durability and pellet percentage of Abrasion pellet measured the devices Arranged the test global experience of factors in accordance with the complete random design (CRD) and three replicates. Experiment carried out at the College of Agriculture / Diyala University in 2015. The results showed that increasing the diameter of the holes forming from 2.5 to 4.5 mm led to a significant decrease in the pellet durability and a significant increase in the percentage of Abrasion, respectively. With the increase in feed water temperature from 17 to 34 and then to 51 m increased significantly durability of the pellet and decreased the percentage of Abrasion, respectively. Also found highly significant correlation between the two readings and the value of the correlation coefficient was 0.969. | ||
| Keywords | ||
| pellet; pellet durability; pellet quality; physical quality | ||
|
Statistics Article View: 147 PDF Download: 35 |
||