Metal Ion Release From Ni-Cr Alloy with Different Artificial Saliva Acidities

Al-Jmmal, Amrah Y.

doi:10.33899/rden.2014.160904

	Metal Ion Release From Ni-Cr Alloy with Different Artificial Saliva Acidities
Al-Rafidain Dental Journal
Article 14, Volume 14, Issue 2, 2014, Pages 266-271 PDF (0 K)
Document Type: Research Paper
DOI: 10.33899/rden.2014.160904
Author
Amrah Y. Al-Jmmal
Abstract
AIMS: evaluate the effects of changes in salivary pH on ion release from the Ni – Cr alloy at different time and calculate the amount of nickel, chromium ions released from these alloyes.MATERIALS AND METHODS: Fourty eight specimens of Ni-Cr alloy were divided, four specimens immersed in each of four types of artificial saliva at different pH (7 as control,6,5 and 2.5), in three storage periods (12, 24 and 36days). All test tubes were incubated at 37°C. After the immersion time was finished the quantities of metallic ions released for Ni and Cr were measured for each test solutions after 12, 24and 36days of immersion by atomic absorption spectroscopy. RESULTS: The results of Nickel and Chromium ion release showed a statistically significant difference at p≤0.05 between three immersion solutions after (12, 24, 36) days, artificial saliva (pH2.5) showed higher rate of Ni and Cr release than artificial saliva (pH 7as control ,6,5) after various immersion times. It should mention the nickel ion release has been found to be more than chromium ion release. CONCLUSIONS: There is an evidence that the Ni and Cr ions release from Ni-Cr alloy at the presence of different acidity of artificial saliva. Chromium and nickel ion release in small amount in artificial saliva with pH(6,5), while in pH 2.5 release in large amount after (12, 24, 36) days of immersion. Nickel exhibited the highest level of ion release than Cr
Keywords
corrosion; ion release; Cr alloy

Statistics Article View: 440 PDF Download: 370