- All Journals
- Al-Qadisiyah University
- Basrah University
- Kirkuk University
- Mosul University
- The Iraqi Borad for Medical Specialization
- University of Anbar
- University of Technology
- Al Mustafa University
- Al-Zahraa University for Women
- Alnoor University
- Kunooz University
- Misan University
- Ninevah University
- Tikrit University
- University of Al-Hamdaniya
- University of Kerbala
Modification of The Rheological Properties of Asphalt Using Spent Lubricating Oils and Air Oxidation | ||
| Journal of Education and Science | ||
| Article 3, Volume 28, Issue 2, 2019, Pages 40-49 PDF (423.96 K) | ||
| Document Type: Research Paper | ||
| DOI: 10.33899/edusj.2019.161176 | ||
| Authors | ||
| Alaa Ali Hussein; Ammar Ahamed Hamdoon | ||
| Abstract | ||
| There is a growing need for the production of certain types of asphaltic materials having good rheological properties compared with the unmodified asphaltic materials, thus many experiments were performed to prepare a modified asphalt that can be used in different fields. This study aims to modify asphalt with the addition of (spent lubricating oils) with different percentages and with air blowing oxidation. From this work we obtained the asphaltic materials which can be used in paving and mastic production according to the measuring of the (ductility, penetration, asphaltene and softening point) | ||
| Keywords | ||
| asphalt; rheological properties; Polymeric Additives; Asphalt Oxidation | ||
| References | ||
|
1- Parkash, S., ”Petroleum Fuels Manufacturing Hand Book”, Mc Graw-Hill Companies, Inc. 102-131, (2010).
2- Zhang, L. and Green field M.L, “Effects of Polymer Modification on Properties and Microstructure of Model asphalt Systems”, Energy & Fuels, Vol. 22, pp. 3363-3375,(2008).
3- Polacco, G. Stastna, J., Biondi, D. Antonelli, F., Vlachovicova, Z. and Zanzotto, L., “Rheology of asphalts modified with glycidylmethacrylate functionalized polymers”. J. of colloid and interface science, Vol. 280, pp. 336-373, (2004).
4- Lesueur D., “ The Colloidal Structure of Bitumen: Consequences on the Rheology and on the Mechanisms Modification”, Advances in colloid and Interface, p.145,28-42, (2009).
5- Introduction To Asphalt”, Asphalt institute manual series No. 5(MS-5)P. 2,9-11, 14,61, (2001)
6- Thakre,N., Mangrulkar,D., Janbandhu,M. and Saxena,J., “Polymer Modified Bitumen”, IOSR Journal of Mechaical and Civil Enginering Vol.13, Issue 6Ver, (2016).
7- Maharaj, Rean and Maharaj, Chris, “Physical Properties of Low Density Polyethylene, Polyvinyl chloride and used Engine oil Modified Asphalt”, Progress in Rubber and Recycling Technology, Vol. 31. 3, (2015).
8- Dekhli, S., Mokhtar, K..A., Hammoum, F.and Bachir, D.S., “Rheological Behaviour of Ethylene-Vinyl-Acetate(EVA) Modified Road Bitumen”, Journal of Applied Sciences Vol. 15, No.(3), pp 444-455, (2015).
9- Djaffar, S., Samy, D. and Khadidja, A.M., “ Rheological Propertes and Storage Stabilty of SEBS Polymer Modified Btumen”, International Journal of Engineering Science and Technology, Vol.5,No.05, (2013).
10- Al-Zubaidi, M. A., “Modification of the Rheological Properties of Beeje Asphalt Using Different Additives and the Field of Their Uses”, M.SC. Thesis, University of Mosul, (2013).
11- Can, J., “Asphalt Modification with Used Lubricating Oil”, Canadian Journal of Civil Engineering, 35(2): 148-157, (2008).
12- Arslan, L., K. and Taque, E., “ Treatment of Asphalt from Heet Area Using the Residues of Basic Oils” , Diala, Jour., Vol. 39, (2008).
13- Huff, B. J. and Vallerga, B. A., “ Characteristic and Performance of Asphalt-Rubber of Materials Containing a blend of Reclaimed and Crumb Rubber”, Transp. Res. Rec.; Chem. Abs., (1982), 96, 22300u, (1981).
14- Al-Sayd Toohi, H. T. S., “Study of Rheological Properties of Modified Qiayarah Asphalt by Reclaim Tires Rubber Using Microwave Technique”, M.Sc. Thesis, University of Mosul, (2013).
15- Sadeque, M., Patil, D.K.A., “ Rheological Properties of Recycled Low Density Polyethlene and Polypropylene Modified Btumen”, Internationol Journal of Advanced Technology in Civil Engineering, Vol.-2, Issue-2, (2013).
16- Bulato, V., O., Rek,V. and Markovic, K.J., “Polymer Modified Bitumen”, Materials Research Innovation Vol.16,No.1(2012).
17- Al-Liheby, S. A. S., “Effect of Some Polymeric Additives to the Asphalt Materials and the Field of Their Uses”, M.Sc. Thesis, University of Mosul, (2012).
18- Anjan, S., Veeraragavan, A., “Construction and Building Materials”, Vol. 24, Issue 11, pp: 2041-2100, (2010).
19- Salih, L. A., “Effect of Air Blowing on the Stability of Mixtures (Qayarah Asphalt-Sulpher), Al-Rafidden Science Journal, Vol. 29, No. 2, pp 174-190, (2008).
20- Ali, L. H., Al-Ghannam, K. A., “Investigation into Asphaltenes in Heavy Crude Oils”, J. Fuel, Vol. 60, pp: 1043-1046, (1981)
21- ASTM, Part II, (D36-70), P. 27, (1972).
22- ASTM, Section 4, (D5-83), P. 97, (1986).
23- ASTM, Section 4, (D5-85), P. 127, (1986).
24- Traxler, R. N., “ Asphalt: Its Composition, Properties in Uses”, Haff, Ltd., London, p. 3. 72-72, (1961).
25- Adam, Georgius A., “Industrial Chemistry”, Dar Al-Kutub for Printing and Publishing, University of Mosul, pp. 168, 171, 440-443, (1986).
26- Ali, L. H. and Al-Dobouni, I. A. “Petroleum: Origin, Composition, and Structure”, Mosul University, pp. 236, 237, 271, 272, 274, (1986).
27- Al-Frakh, Y. and Abu Shihada, A., “Production of Bitumen Grades”, Brit., UK Pat. Appl., GB2, 028,406; Chem. Abs., (1982), 96, 126085g, (1981).
28- Holbsen, G. D., “ Modern Petroleum Technology”, 4th ed., Ltd. Britain, pp: 804-806, 810-811, (1975).
29- ASTM (1969), Part 11, (D491-41), p. 250-251, (1969).
30- Central Organization for Standardization and Quality Control (COSQC), Standard Specification No. 1196 about the Asphalt used in Roofing Operations, Ministry of Construction and Housing and Municipalities and Public Works, Iraq, (1988).
31- State Commission for Roads and Bridges (SCRB), Department of Design and Study, Ministry of Construction and Housing and Municipalities and Public Works, Baghdad, (2001). | ||
|
Statistics Article View: 427 PDF Download: 1,643 |
||