REMOVAL OF TERASIL BLUE DYE FROM SYNTHETIC WASTEWATER USING LOW COST AGRO-BASED ADSORBENTS

, Hatem Asal Gzar; , Noor Qassim Sabri

	REMOVAL OF TERASIL BLUE DYE FROM SYNTHETIC WASTEWATER USING LOW COST AGRO-BASED ADSORBENTS
Al-Qadisiyah Journal for Engineering Sciences
Article 1, Volume 11, Issue 2, 2018, Pages 246-255 PDF (0 K)
Authors
Hatem Asal Gzar; Noor Qassim Sabri
Abstract
Natural materials that are readily available in large amounts in nature and easily accessible may be used as low cost additives. The aim of this study is to measure the susceptibility of these locally available materials, conocarpus plant, to improve the quality of wastewater discharged from textile industry. In addition to conocarpus plant, carbonized conocarpus and activated carbon were used as adsorbents in order to make a comparison, and to test which one of the three types give the best efficiency for removing dye. The ability of adsorbents to adsorb dye was studied using batch system; studied parameters were effect of pH, dose of adsorbents, time, and agitation speed. The experimental results showed that the maximum removal efficiency of conocarpus was found to be 87.5% at 50 rpm mixing speed, pH value 3 , mixing time 120 min and the dose of adsorbent was 0.25 g. The maximum removal efficiency for carbonized conocarpus was up to 98.7% at 150 rpm mixing speed, pH value 3 , mixing time was equal to 7 hours and the dose of sorbent was 1.25 g. For activated carbon the maximum removal efficiency was found to be 99% at mixing speed of 200 rpm, pH value 3 or 11, mixing time was equal to 7 hours and the dose of the sorbent was 1.25 g. The above removal efficiencies were obtained at temperature 20 °C.
Keywords
Terasil blue dye; wastewater; Adsorption; Low cost adsorbent; Batch study

Statistics Article View: 181 PDF Download: 180