- All Journals
- Al-Qadisiyah University
- Basrah University
- Kirkuk University
- Mosul University
- The Iraqi Borad for Medical Specialization
- University of Anbar
- University of Technology
- Al Mustafa University
- Al-Zahraa University for Women
- Alnoor University
- Kunooz University
- Misan University
- Ninevah University
- Tikrit University
- University of Al-Hamdaniya
- University of Kerbala
Impedance Force / Position Control for Planar 3DOF Robot Manipulator by Fuzzy Neural Network Combination | ||
| Al-Rafidain Engineering Journal (AREJ) | ||
| Article 14, Volume 24, Issue 1, 2019, Pages 46-54 PDF (522.54 K) | ||
| Document Type: Research Paper | ||
| DOI: 10.33899/rengj.2019.163196 | ||
| Author | ||
| Saad Z. S. Al-khayyt* | ||
| Departement of Mechatronics Engineering, College of Engineering, University of Mosul, Mosul, Iraq | ||
| Abstract | ||
| As the demands for more robot's complex tasks were increased, force and torque control had become necessary. When contact forces are present, the performance of the trajectory tracking controller is degraded. Impedance force / position controller is proposed in this paper. The impedance force at the tip is controlled by fuzzy PID controller. PID controller tuned by adaptive linear network is used for trajectory tracking. A combination of fuzzy PID controller and PID controller tuned by neural network is used to generate the required torque at the robot manipulator's joints. The Jacobian matrix is derived for planar 3-DOF to transform the forces into joints' torque. Simulations are presented for robot manipulator with force contact at the tip. The trajectory tracking is improved by using fuzzy PID controller for impedance force of the environment. | ||
| Keywords | ||
| Adaptive linear network; fuzzy PID; Impedance force control; Jacobin matrix; neural network; Tuned PID controller | ||
| References | ||
|
[1] M. Homayounzade and M. Keshmiri,“Adaptive position/force control of robot manipulators with force estimation”, 2nd RSI/ISM International Conference on Robotics and Mechatronics, 2014, pp.736-741.
[2] J.-C. Shen and H.-K. Chiang, “PID tuning rules for second order systems”, IEEE 5th Asian Control Conference, vol.1, pp.472-477, 2004.
[3] Q.-S. Lin, Y.-F. Yao, and J.-X. Wang, “Simulation and application of neural network PID auto-tuning controller in servo-system” , IEEE 2nd International Workshop on Database Technology and Applications, 2010, pp.1-4.
[4] K. Zhang and X. An, “Design of multivariable self-tuning PID controllers via quasi-diagonal recurrent wavelet neural network”, 2nd International Conference on Intelligent Human Machine Systems and Cybernetics, vol.2, 2010, pp.95-99.
[5] S. Z. S. Al-khayyt “Tuning PID controller by neural network for robot manipulator trajectory tracking,” Al-Khwarizmi Engineering Journal, vol.8, no.1, pp.19-28, 2013.
[6] M. M. F. Algreer and Y. R. M. Kuraz, “Design fuzzy self-tuning of PID controller for Chopper-Fed DC motor drive” ,Al-Rafidian Engineering, vol.16, no.2, pp.54-66, 2008.
[7] M. Ataei and S. E. Shafiei, “Sliding mode PID-controller design for robot manipulators by using fuzzy tuning approach”, Proceedings of the 27th Chinese Control Conference, Kunming, Yunnan, China, 2008, pp.170-174.
[8] S. Z. S. Al-khayyt, “Comparison between Fuzzy Logic Based Controllers for Robot Manipulator Trajectory Tracking, The First National Conference for Engineering Sciences FNCES'12 / November 7-8, 2012
[9] F. Wang, Z. Luo, H. Liu, and L. Wang, “Impedance model based fuzzy force control for robot manipulator contacting with a constrained surface with uncertain errors”,IEEE International Conference on Robotics and Biomimetics, 2010, pp. 1555-1558.
[10] P. N. Koustoumpardis and N. A. Aspagathos, “Model reference fuzzy learning force control for robotized sewing,” 19th Mediterranean Conference on Control and Automation, 2011, pp.1460-1465.
[11] M. P. Plius, M. Yilmaz, U. Seven, and K. Erbatur, “Fuzzycontroller scheduling for robotic manipulator force control,” 12th IEEE International Workshop on Advanced Motion Control, 2012, pp. 1-8.
[12] H.-R. Wang, L. Yang, and L.-X. Wei, “Intelligent position / force control for uncertain robot using neural network compensation” ,Journal of Machine Learning and Cybernetics, IEEE Proceedings of 2005 International Conference, vol.2, 2005, pp.1175-1179.
[13] S. Jung and T. C. Hsia, “Reference Compensation Technique of Neural Force Tracking Impedance Control for Robot Manipulators”, 8th World Congress on Intelligent Control and Automation, July 6-9 2010, Jinan, China, 2010, pp. 650-655.
[14] H.-R. Wang, L. Yang, and L.-X. Wei, “Fuzzy-neuro position / force control of robot manipulators with uncertainties”,Journal of Soft Computing – Afusion of Foundations, Methodologies and Applications, vol.11, no.4, 2007, pp.311-315.
[15] N. Kharmandar and A. A. Khayyat, “Force impedance control of a robot manipulator using a neuro-fuzzy controller”,IEEE International Conference on Mechatronics Science, Electric Engineering and Computer, 2011, pp.559-563.
[16] W.-C. Wang,C.-H. Lee, “Fuzzy neural network-based adaptive impedance force control design of robot manipulator under unknown environment”,IEEE International Conference on Fuzzy Systems, 2014, pp. 1442-1448.
[17] J. J. Craige, Introduction to Robotics: Mechanics and Control, Prentice-Hell, Inc., 2005.
[18] A. A. Atef and M. Y. Sa'adah, “Soft motion trajectory for planar redundant manipulator”,In 2006 9th International Conference on Control, Automation, Robotics and Vision, pp. 1-6. IEEE, 2006.
[19] H. Lehuy and G. Sybille, MATLAB Help ver.7, Math works, Inc., 2004. | ||
|
Statistics Article View: 583 PDF Download: 492 |
||