- All Journals
- Al-Qadisiyah University
- Basrah University
- Kirkuk University
- Mosul University
- The Iraqi Borad for Medical Specialization
- University of Anbar
- University of Technology
- Al Mustafa University
- Al-Zahraa University for Women
- Alnoor University
- Kunooz University
- Misan University
- Ninevah University
- Tikrit University
- University of Al-Hamdaniya
- University of Kerbala
Study the Temperature Effects on Mechanical Properties of Cold Cured Denture Base Acrylic Material | ||
| Al-Rafidain Dental Journal | ||
| Article 22, Volume 13, Issue 2, 2013, Pages 346-350 PDF (487.69 K) | ||
| Document Type: Research Paper | ||
| DOI: 10.33899/rden.2020.165194 | ||
| Author | ||
| Enas G Younis | ||
| Abstract | ||
| Aims: The purpose of this study is to explore the behavior of cold curing acrylic resin which used in dentistry during some mechanical properties (hardness, compression and impact)tests under different temperatures. Materials and Methods: Twenty four pinks from cold cured samples for each mechanical-physical properties tested were prepared under temperatures(20,24,28,32,37,45,50) C0 to cover a wide range similar to actual service temperatures. All specimens were soaked in distilled water. One hour ,two hours ,three hours were chosen as the time for soaking and the means of the tests were recorded. Results: The results show that the compression and hardness decreasing with the increasing of temperature and increase of impact strength with the increase of temperature up to (28) C0 then followed by a decrease in impact strength. Conclusions: The decrease of compressive strength and hardness is compatible with the results obtained under compressive Conditions. Keywords: Temperature, mechanical properties, cold cured material. | ||
| Keywords | ||
| cold cured acrylic; Mechanical properties | ||
|
Statistics Article View: 278 PDF Download: 309 |
||