Toward Semi Flexible Pavement Application for Iraqi Highway and Airport Pavements: Review its feasibility

[1] Kenneth R. Ward, P.E., POROUS ASPHALT PAVEMENT:CITY OF NEW BERLIN. 
Available: http://www.ruekertmielke.com. 2017. 
[2] Lafarge in Canada, DuraTough® Booklet.  Available: https://www.lafarge.ca/en. 2012. 
[3] Asmael, N.M.J.J.o.E., Effect of mineral filler type and content on properties of asphalt 
concrete mixes. 2010. 16(3): p. 5352-5362. 
[4] Kadhim, Z.A. and Z.A.Z.J.J.o.U.o.B.f.E.S. Mahdi, Evaluation of Asphalt Pavement Distresses 
in Main Roadways in Al-Diwaniyah City. 2018. 26(1): p. 72-80. 
[5] Abed, A.H., A.A.J.A.J.o.E. Al-Azzawi, and A. Sciences, Evaluation of rutting depth in 
flexible pavements by using finite element analysis and local empirical model. 2012. 5(2): p. 
163-169. 
[6] Aliha, M., et al., Effect of temperature and air void on mixed mode fracture toughness of 
modified asphalt mixtures. 2015. 95: p. 545-555. 
[7] Van de Ven, M. and A. Molenaar, MECHANICAL CHARACTERIZATION OF COMBI
LAYER (WITH DISCUSSION). Journal of the Association of Asphalt Paving Technologists, 
2004. 73. 
[8] Anderton, G.L., Engineering properties of resin modified pavement (RMP) for mechanistic 
design. 2000, ENGINEER RESEARCH AND DEVELOPMENT CENTER VICKSBURG 
MS GEOTECHNICAL LAB. 
[9] Ahlrich, R.C. and G.L. Anderton, Evaluation of Resin-Modified Paving Process. 1991. 
[10] British Board of Agrement, B., Hardicrete Heavy Duty Surfacing. Agrement Certificate No 
88/1969. Watford. 1994. 
[11] British Board of Agrement, B., Worthycim Heavy Duty Paving. Agrement Certificate 
87/1900. Watford. 1996. 
[12] Densit, a.s., Densiphalt® Handbook. Aalborg. 2000. 
[13] Setyawan, A., Development of semi-flexible heavy-duty pavements. 2006, University of 
Leeds. 
[14] Hassan, K. and A. Setyawan. Cold mix, cold laid semi-flexible Grouted Macadams, mix 
design and properties. in Performance of Bituminous and Hydraulic Materials in Pavements: 
Proceedings of the Fourth European Symposium, Bitmat4, Nottingham, UK, 11-12 April 
2002. 2017. Routledge. 
[15] Mayer, J. and M. Thau, Jointless pavements for heavy-duty airport application: the semi
flexible approach, in Advancing Airfield Pavements. 2001. p. 87-100. 
[16] Oliveira, J.R., N.H. Thom, and S.E.J.J.o.T.E. Zoorob, Design of pavements incorporating 
grouted macadams. 2008. 134(1): p. 7-14. 
[17] Huang, C., et al. Improvement on the crack resistance property of semi-flexible pavement by 
cement-emulsified asphalt mortar. in Key Engineering Materials. 2012. Trans Tech Publ. 
[18] Yang, B., X.J.C. Weng, and B. Materials, The influence on the durability of semi-flexible 
airport pavement materials to cyclic wheel load test. 2015. 98: p. 171-175. 
[19] Wang, D., et al., Study on Mechanics-Based Cracking Resistance of Semiflexible Pavement 
Materials. 2018. 2018. 
[20] Contec, 
The 
new 
generation 
http://www.confalt.com. 2005. 
semi-flexible 
wearing 
course. 
Available: 
[21] Zoorob, S., K. HASSAN, and A. SETYAWAN. COLD MIX, COLD LAID SEMI
FLEXIBLE GROUTED MACADAMS, MIX DESIGNS AND PROPERTIES. in 
PROCEEDINGS OF THE 4TH EUROPEAN SYMPOSIUM ON PERFORMANCE OF 
BITUMINOUS AND HYDRAULIC MATERIALS IN PAVEMENTS, BITMAT 4, 11-12 
APRIL 2002, NOTTINGHAM, UK. 2002. 
[22] Alvarez, A.E., A.E. Martin, and C.J.J.o.M.i.C.E. Estakhri, Drainability of permeable friction 
course mixtures. 2010. 22(6): p. 556-564. 
[23] Roseen, R.M., et al., Water quality and hydrologic performance of a porous asphalt pavement 
as a storm-water treatment strategy in a cold climate. 2012. 138(1): p. 81-89. 
[24] Van der Zwan, J.T., et al., Porous asphalt wearing courses in the Netherlands: State of the art 
review. 1990(1265). 
[25] Liu, Q., et al., Induction healing of asphalt mastic and porous asphalt concrete. 2011. 25(9): p. 
3746-3752. 
[26] Shirini, B., R.J.C. Imaninasab, and B. Materials, Performance evaluation of rubberized and 
SBS modified porous asphalt mixtures. 2016. 107: p. 165-171.
[27] Sangiorgi, C., et al., A complete laboratory assessment of crumb rubber porous asphalt. 2017. 
132: p. 500-507. 
[28] Al-Qadi, I.L., H. Gouru, and R. Weyers, Asphalt Portland cement concrete composite: 
laboratory evaluation. Journal of transportation engineering, 1994. 120(1): p. 94-108. 
[29] Koting, S., M.R. Karim, and H. Mahmud. The Properties of bituminous mixtures for semi
flexible pavement. in Proceedings of the Eastern Asia Society for Transportation Studies Vol. 
6 (The 7th International Conference of Eastern Asia Society for Transportation Studies, 
2007). 2007a. Eastern Asia Society for Transportation Studies. 
[30] Hu, S., et al. Study on the cementitious mortar for semi-flexible pavement. in International 
Conference on Microstructure Related Durability of Cementitious Composites. 2008. RILEM 
Publications. 
[31] Ling, T.-Q., et al., The Application of Semi-Flexible Pavement on Heavy Traffic Roads. 
International Journal of Pavement Research and Technology, 2009. 2(5). 
[32] M. G. Al-Taher, et al., Technical Evaluation of Using Grouting For Producing Semi-Flexible 
Asphalt Concrete Mixtures. Mansoura Engineering Journal, (MEJ), Vol. 40, Issue 4, 
December 2015., 2015. 
[33] Hou, S., T. Xu, and K. Huang, Investigation into engineering properties and strength 
mechanism of grouted macadam composite materials. International Journal of Pavement 
Engineering, 2015. 17(10): p. 878-886. 
[34] Tran, T.N., et al. Semi-flexible material: The sustainable alternative for the use of 
conventional road materials in heavy-duty pavement. in Congrès International de 
Géotechnique–Ouvrages–Structures. 2017. Springer. 
[35] Jatoi, G.H., et al., Design and Evaluation of Open Graded Hot Mix Asphalt Using Cement as 
A Grouting Material. International Journal of Modern Research in Engineering & 
Management (IJMREM), 2018. 1(10): p. 75-83. 
[36] Wang, K. and J. Hong, Hybrid Concrete for Advancing Pavement Performance. 2018. 
[37] Luo, S., et al., Open-graded asphalt concrete grouted by latex modified cement mortar. 2018. 
21(1): p. 61-77. 
[38] ASTM, Standard Practice for Open-Graded Friction Course (OGFC) Mix Design, in D7964, 
American Aociety for Testing Material. 2013e: West Conshohocken, PA, United States. 
[39] Koting, S., et al., Effects of Using Silica Fume and Polycarboxylate-Type Superplasticizer on 
Physical Properties of Cementitious Grout Mixtures for Semiflexible Pavement Surfacing. 
TheScientificWorldJournal, 2014a. 2014: p. 596364. 
[40] Koting, S., H. Mahmud, and M.R. Karim. Influence of superplasticizer type and dosage on 
the workability and strength of cementitious grout for semi-flexible pavement application. in 
Proceedings of the Eastern Asia Society for Transportation Studies Vol. 6 (The 7th 
International Conference of Eastern Asia Society for Transportation Studies, 2007). 2007b. 
Eastern Asia Society for Transportation Studies. 
[41] Husain, N.M., et al., Effects of aggregate gradation on the physical properties of semiflexible 
pavement. 2014. 2014. 
[42] Afonso, M.L., et al., Development of a semi-flexible heavy duty pavement surfacing 
incorporating recycled and waste aggregates–Preliminary study. 2016. 102: p. 155-161. 
[43] Cai, J., et al., Comprehensive service properties evaluation of composite grouting materials 
with high-performance cement paste for semi-flexible pavement. 2017. 153: p. 544-556. 
[44] Bang, J.W., et al., Development of a semirigid pavement incorporating ultrarapid hardening 
cement and chemical admixtures for cement grouts. 2017. 2017. 
[45] Bharath, G., et al., Laboratory and field evaluation of cement grouted bituminous mixes. 
2019: p. 1-19. 
[46] Setyawan, A., Asessing the compressive strength properties of semi-flexible pavements. 
Procedia Engineering, 2013. 54: p. 863-874.
[47] Pei, J., et al., Design and performance validation of high-performance cement paste as a 
grouting material for semi-flexible pavement. Construction and Building Materials, 2016. 
126: p. 206-217. 
[48] Sun, Y., et al., Research on Properties of High-Performance Cement Mortar for Semiflexible 
Pavement. Advances in Materials Science and Engineering, 2018. 2018. 
[49] Karami, M. Application of the cementitious grouts on stability and durability of semi flexible 
bituminous mixtures. in AIP Conference Proceedings. 2017. AIP Publishing LLC.