Fabrication of Ni-ZrO2 Nanocomposite Coating by Electroless Deposition Technique

Algailani, Hiba M.; Mahmoud, Adel K.; Al-Kaisy, Hanna A

doi:10.30684/etj.v38i5A.491

	Fabrication of Ni-ZrO2 Nanocomposite Coating by Electroless Deposition Technique
Engineering and Technology Journal
Article 3, Volume 38, 5A, 2020, Pages 649-655 PDF (728.7 K)
DOI: 10.30684/etj.v38i5A.491
Authors
Hiba M. Algailani¹; Adel K. Mahmoud²; Hanna A Al-Kaisy³
¹Materials Engineering Department, University of Technology, Baghdad, Iraq.
²Collage of Engineering, University of Diyala, Diyala, Iraq,
³material engineering, university of technology
Abstract
This work aims preparation of Ni-based nanocomposite coating by electroless deposition method onto stainless steel (316L) substrate, the present work will compare the effects of incorporation of ZrO2 nanoparticles at different percentages (1.25 wt %, 2.25 wt %, and 4.25 wt %) Ni-based electroless deposition coating of the bath nanocomposite on the phase structure, microhardness, and corrosion resistance is studied. Where the structure and chemical composition of nanocomposite coatings were studied by using (X-ray), (SEM) and (EDS). of Ni - ZrO2 nanocomposite coating exhibits much-increased microhardness and remarkably improved corrosion resistance
Keywords
Electroless deposition technique; Ni-ZrO2 nanocomposite coating; ZrO2 nanoparticles

References
[1] F. Kazemi, A. Saberi, S. Malek-Ahmadi, S. Sohrabi, H.R. Rezaie and M. Tahriri, “A novel method for synthesis of metastable tetragonal zirconia nanopowders at low temperatures,” Vol.55, No. 1, pp. 26-30, 2011 [2] M.J. Mayo, J.R. Seidensticker, D.C. Hague, A.H. Carim, “Surface chemistry effects on the processing and superplastic properties of nanocrystalline oxide ceramics,” Nanostruct. Mater., Vol. 11, No. 2, pp. 271-282, 1999. [3] M.Guazzato, M. AIbakry, SP. Ringer, MV.Swain, ''Strength, fracture toughness and microstructure of a selection of all ceramic materials, part ii. zirconia based dental ceramics,” Dent Mater. Vol.20, pp.449- 456, 2004. [4] Y. Zhang, J.Malzbender, D.E.Mack, M.O.Jarligo, X.Cao, Q.Lid, R. Vaben, D. Stöver, “Mechanical properties of zirconia composite ceramics, ceramics international,” 39, pp.7595–7603, 2013. [5] D.A. Banerjee, A J.Kessman, ,D.R. Cairns, K.A. Sierros, “Tribology of silica nanoparticle-reinforced, hydrophobic sol-gel composite coatings,” Surf. Coat. Technol., 260, pp.214–219, 2004. [6] P. Sharma, N.Kumar Mehra, K. Jain, & N. K. Jain, ''Biomedical applications of carbon nanotubes, a critical review,” Current drug delivery, 13(6), 796-817, 2016. [7] A. Brenner, G.E. Riddell, ''Deposition of nickel and cobalt by chemical reduction,” Journal of Research of the National Bureau of Standards, 39, pp.385–395, 1947. [8] A.K. Mahmoud, O.Hasan., and K. Ramazan, “Synthesis of nano Al2O3 reinforcement Ni-based nanocomposite coating by electroless deposition technique,” Biological and Chemical Research, 1, pp.102-108, 2018. [9] Yang, Y., Chen, W., Zhou, C., Xu, H., & Gao, W., “Fabrication and characterization of electroless Ni-P-ZrO2 nano-composite coatings,” Applied Nano science, 1, 1, pp.19-26, 2011. [10] A.S. Hassanien, A. Akl, “Crystal imperfections and mott parameters of sprayed nanostructure IrO2 thin films,” Physica B: Condensed Matter, 473, pp.11-19, 2015. [11] Xu, Wenhua, Z. Wang, En.Hou Han, Sh. Wang, Q. Liu, “'Corrosion performance of nano-ZrO2 modified coatings in hot mixed acid solutions,” Materials, 11, 6, 934, 2018. [12] O. I. Sekunowo, S. O. Adeosun and G.I. Lawal, “Potentiostatic polarisation responses of mild steel in seawater and acid environments,” International Journal of Scientific & Technology Research, Vol. 2, No. 10, pp. 139-145, 2013.
Statistics Article View: 366 PDF Download: 237