Cement Based Solidification/Stabilization Leaching Performances of Selected Heavy Metal Ions under Different pH Extractions

Hussain, Basim A. Hussain A.; Ebrahim, Shahlaa E.; Sulaymon, Abbas H.

doi:10.30684/etj.37.2C.11

	Cement Based Solidification/Stabilization Leaching Performances of Selected Heavy Metal Ions under Different pH Extractions
Engineering and Technology Journal
Article 11, Volume 37, 2C, 2019, Pages 268-274 PDF (794.81 K)
Document Type: Research Paper
DOI: 10.30684/etj.37.2C.11
Authors
Basim A. Hussain A. Hussain¹; Shahlaa E. Ebrahim²; Abbas H. Sulaymon³
¹Environmental Engineering, Ministry of Science and Technology Directorate of Hazardous Wastes Treatment and Disposal - Iraq
²Environmental Engineering University of Baghdad, Environmental Engineer Department - Iraq
³Chemical Engineering, University of Baghdad, Environmental Engineer Department - Iraq
Abstract
Liquid to solid partitioning as a function of pH leaching Procedure LSP EPA method 1313 was carried out to test the effectiveness , performance and efficiency of the cement-based solidification / stabilization (S/S) of heavy metals contaminated sand samples using Ordinary Portland Cement OPC type A . Two cement based mix designs ( 7 and 25 % ) have been applied to (S/S) sand contaminated samples with different heavy metal ions ( Pb , Cu , Cr , and Cd ) having the following concentrations ( 500 , 1500 and 3000 mg / kg ). Fixed water to cement ratio of 0.45 was maintained for all the experiments. Effective retention levels for the heavy metal ions was achieved using a 25 % OPC mix ratio to (S/S) the contaminated samples even when the extraction solutions were of pH levels as low as 2. Leaching experiments showed that as the pH level of the extraction solution is reduces and as the OPC content in the (S/S) samples is reduced the more heavy metal ions that can leach out. Up to 80 % of chromium, cadmium, lead, and copper ions leachability can be prevented when higher cement content is introduced to the solidification / stabilization process under the same pH extraction. Acidic extraction effects and solubilized the Calcium – Silica – Hydrate (C-S-H) gel that is created by the OPC binder, which holds, and contain the heavy metal ions and thus results in more release of those ions into the extraction solutions. The alkaline environments provided by the cement binder are believed to have participated in the precipitation of several metal ions such as cadmium and lead io, leading to their less detection in the leaching extracts. Alkaline extraction experiments (pH 8-13) showed that the mobility of the metal ions under the same experimental conditions followed the order of pb> Cr > Cu > Cd in samples of various cement contents.
Keywords
Solidification / Stabilization; Heavy Metals; LSP; leaching

References
[1] W. Salomons., W.M. Stigliani, “Bio Geodynamics of Pollutants in Soils and Sediments: Risk Assessment of Delayed and Non-Liner Responses,” Environmental Science, Springer - verlag, pp. 331-343, 1995. [2] T.H. Christensen, P. Kjeldsen, P.L. Bjerg., D.L. Jensen, J.B. Christensen, A. Baun, “Biogeochemistry of Landfill Leachate Plumes,” ApplGeochem, Vol. 16, pp. 659–718, 2001. [3] L.G. Hansen, and R.L. Chaney, “Environmental and Food Chain Effects of the Agricultural Use of Sewage Sludges,” Rev. Environ. Toxicol, Vol. 1, pp. 103-110, 1984. [4] J.R Conner, “Considerations of Selecting Chemical Fixation and Solidification Alternatives,” The Engineering Approach. Second Annual Conference of Applied Research and Practice on Municipal and Industrial Waste, .Madison, Wisconsin, 9, 1979. [5] EPA, “National Waste Management Plan 2014-2020,” 2014. 6] S.K. Gupta, and M.T. Surwade, “Immobilization of Heavy Metals from Steel Plating Industry Sludge Using Cement as Binder at Different pH. In confer on moving forward wastewater bio solids sustainability,” Technical, Managerial, and Public Synergy, New Brunswick. PP. 773- 777, 2007. [7] R.N. Yong, A.M.O. Mohamed and B.P. Warkentin, “Principles of Contaminant Transport in Soils,” Elsevier, Amsterdam, 1992 [8] W.R. Eugene, B. Rodger, D.E. Andrew, S. Lenore, C, “Standard Methods of Water and Wastewater, 22nd edition,” American Public Health Association, Washington, 2012. [9] O.E. Omotoso, D.G. Ivery, R. Mikula, “Hexavalent Chromium in Tricalcium silicate,” J .Mater, Sci., Vol. 33, pp. 507-513, 1998. [10] P.L. Bishop, “Leaching of Inorganic Hazardous Constituents from Stabilized / Solidified Hazardous Wastes,” Hazard waste Mater, Vol. 5, No. 2, pp. 129-143, 1988. [11] F.K. Cartledgeet, L.G. Butler, D. Chalasani, H.C. Eaton, F. P. Frey, E. Herrera, M.E. Tittlebaum, S.L. Yang, “Immobilization Mechanisms in Solidification / Stabilization of Cd and Pb Salts using Portland Cement Fixing Agents,” Environ .Sci. Techno., Vol. 24, pp. 867- 873, 1990. [12] A. Coz, A. Andres., S. Sorino, A. Irabin,“Environmental Behavior of Stabilized Foundry Sludge,” J. Hazard. Mater, Vol. B109, pp. 95-104, 2004. [13] M. Rachana and C. Rubina, “Evaluation of Leaching Characteristics and Environmental Compatibility of Solidified / Stabilized Industrial Waste,” J Mater Cycles Waste Manag, Vol. 8, pp.78- 87, 2006. [14] K.K. Athanasios, A.V. Evangelos, “Leaching Behaviour of Metals Released From Cement - Stabilized / Solidified Refinery Oily Sludge by Means of Sequential Toxicity Characteristic Leaching Procedure, 2008.
Statistics Article View: 321 PDF Download: 308