Vacuum Effect on the Performance of Solar Air Collector with Micro-Channel Absorber Plate

[1] C.B. Eaton and H.A Blum, “The use of moderate
vacuum environments as a means of increasing the
collection efficiencies and operating temperatures of
flat-plate solar collectors,” Solar Energy 17.3, pp. 151-
158, 1975.
[2] Georgiev, “Simulation and experimental results of
a vacuum solar collector system with storage,” Energy
conversion and management, 46(9-10), pp. 1423-1442,
2005.
[3] P. Fang, C. Eames, B. Norton, and T.J. Hyde,
“Experimental validation of a numerical model for
heat transfer in vacuum glazing,” Solar Energy, 80(5),
pp. 564-577, 2006.
[4] B. Bhushan and R. Singh, “Thermal and
thermohydraulic performance of roughened solar air
heater having protruded absorber plate,” Solar energy,
86(11), pp. 3388-3396, 2012.
[5] M.K. Mansour, “Thermal analysis of novel
minichannel-based solar flat-plate collector,” Energy,
60, pp. 333-343, 2013.
[6] L. Chai, G. Xia, L. Wang, M. Zhou, and Z. Cui,
“Heat transfer enhancement in microchannel heat sinks
with periodic expansion–constriction cross-sections,”
International Journal of Heat and Mass Transfer, 62,
pp. 741-751, 2013.
[7] D. Desai, and D. Subhedar, “Hydraulic and
Thermal performance of microchannel.” International
Journal of Engineering Trends and Technology
(IJETT), Volume4Issue5, 2013.
[8] B. Li, S. You, T. Ye, H. Zhang, X. Li, and C. Li,
“Mathematical modeling and experimental verification
of vacuum glazed transpired solar collector with slitlike perforations,” Renewable Energy, 69, pp. 43-49,
2014.
[9] M.A. Oyinlola, G.S.F. Shire, and R.W. Moss,
“Thermal analysis of a solar collector absorber plate
with microchannels,” Experimental Thermal and Fluid
Science, 67, pp. 102-109, 2015.
[10] F. Arya, T. Hyde, P. Henshall, P.C. Eames, R.
Moss, and S. Shire, “Fabrication and characterisation
of slim flat vacuum panels suitable for solar
applications,” 2015.
[11] V. Yadav, K. Baghel, R. Kumar, and S.T. Kadam,
“Numerical investigation of heat transfer in extended
surface microchannels,” International Journal of Heat
and Mass Transfer, 93, pp. 612-622, 2016.
[12] O V. Shepovalova, D.A. Durnev, A.V. Chirkov,
and S. V. Chirkov, “High Vacuum Glass Units
Application for Solar Radiation Thermal Conversion,”
Energy Procedia, 119, pp. 995-1002, 2017.
[13] R.W. Moss, G.S.F. Shire, P. Henshall, P.C.
Eames, F. Arya, and T. Hyde, “Optimal passage size
for solar collector microchannel and tube-on-plate
absorbers,” Solar Energy, 153, pp. 718-731, 2017.
[14] R. Moss, S. Shire, P. Henshall, F. Arya, P. Eames,
and T. Hyde, “Performance of evacuated flat plate
solar thermal collectors,” Thermal Science and
Engineering Progress, 8, pp. 296-306, 2018.
[15] A. Ghahremannezhad, and K. Vafai, “Thermal
and hydraulic performance enhancement of
microchannel heat sinks utilizing porous substrates,”
International Journal of Heat and Mass Transfer, 122,
pp. 1313-1326, 2018.