Investigation the Morphological Characteristics of the Particulate Matter Emissions from the Oxygenated Fuels Combustion in Diesel Engines

[1] H. Burtscher, “Physical characterization of particulate
emissions from diesel engines: A review,” Journal of
Aerosol Science, 36, p. 896-932, 2015.
]2[ Y.F. Xing, Y.H. Xu, M.H. Shi, Y.X. Lian, “The
impact of PM2. 5 on the human respiratory system,”
Journal of thoracic disease, 8, 1, p. E69, 2016.
]5[ M.A. Fayad, A. Tsolakis, D. Fernández-Rodríguez,
J.M. Herreros, F.J. Martos, M. Lapuerta, “Manipulating
modern diesel engine particulate emission characteristics
through butanol fuel blending and fuel injection strategies
for efficient diesel oxidation catalysts,” Appl. Energ., 190,
p. 490-500, 2017.
]4[ S.S. Gill, G.S. Chatha, A. Tsolakis, “Analysis of
reformed EGR on the performance of a diesel particulate
filter,” Int. J. Hydrogen Energy, 36, 16, p. 10089-10099,
2011.
]3[ B.S. Haynes, H.G.G. Wagner, “Soot formation”,
Prog. Energy Combust SCI, 7, p. 229-73, 1981.
]3[ C.D. Rakopoulos, D.T. Hountalas, T.C. Zannis,
“Operational and environmental evaluation of diesel
engines burning oxygen-enriched intake air or oxygenenriched fuels: a review,” SAE Technical Paper, p. 01-
2924, 2004.
]3[ H.L. Fang, and M.J. Lance, “Influence of Soot
Surface Changes on DPF Regeneration. SAE Technical
Paper, p. 01-3043, 2004.
]8[ D. Fino, S. Bensaid, M. Piumetti, N. Russo, “A
review on the catalytic combustion of soot in diesel
particulate filters for automotive applications: from powder
catalysts to structured reactors,” Applied Catalysis A:
General, 509: p. 75-96, 2016.
]9[ K.O. Lee, R. Cole, R. Sekar, M.Y. Choi, J. Kang, C.
Bae, “Detailed characterization of morphology and
dimensions of diesel particulates via thermophoretic
sampling,” SAE Technical Paper, 2001.
]01[ J. Zhu, K. Lee, A. Panov, J. Akers, C. Habeger, “An
investigation of particulate morphology, microstructures,
and fractal geometry for a diesel engine-simulating
combustor,” SAE transactions, p. 2062-2069, 2004.
]00[ K. Al-Qurashi, A.L. Boehman, “Impact of exhaust
gas recirculation (EGR) on the oxidative reactivity of
diesel engine soot,” Combustion and Flame, 155, p. 675-
695, 2008.
]02[ J. Song, M. Alam, A.L. Boehman, U. Kim,
“Examination of the oxidation behaviour of biodiesel
soot,” Combustion and Flame, 146, p. 589-604, 2006.
]05[ A. Setiabudi, M. Makkee, J.A. Moulijn, “The role of
NO2 and O2 in the accelerated combustion of soot in diesel
exhaust gases,” Applied Catalysis B: Environmental, 50, 3,
p. 185-194, 2004.
]04[ J.O. Müller, D.S. Su, R.E. Jenthoft, J. Kröhnert, R.
Schlögl, “Morphology-controlled reactivity of
carbonaceous materials towards oxidation,” Catalyst
Today, 102-103, p. 259-265, 2005.
]03[ S.H. Kim, R.A. Fletcher, M.R. Zachariah,
“Understanding the difference in oxidative properties
between flame and diesel soot nanoparticles: The role of
metals,” Environmental science & technology, 39, 11, p.
4021-4026, 2005.
]03[ A. Yezerets, N.W. Currier, H.A. Eadler,
“Experimental determination of the kinetics of diesel soot
oxidation by O2-modeling consequences,” SAE Technical
Paper, 2003.
]03[ T. Ishiguro, N. Suzuki, Y. Fujitani, H. Morimoto,
“Microstructural Changes of Diesel Soot during Oxidation,
Combustion and Flame, 85, 1-2, p. 1-6, 1991.
]08[ E. Sukjit, J.M. Herreros, K.D. Dearn, R. GarciaContreras, A. Tsolakis, “The effect of the addition of
individual methyl esters on the combustion and emissions
of ethanol and butanol -diesel blends,” Energy, 42, 1, p.
364-374, 2012.
]09[ E. Sukjit, J.M. Herreros, J. Piaszyk, K.D. Dearn, A.
Tsolakis, “Finding synergies in fuels properties for the
design of renewable fuels–Hydroxylated biodiesel effects
on butanol-diesel blends,” Environ. Sci. Tech., 47, 7, p.
3535-3542, 2013.
]21[ M.A. Fayad, “Effect of renewable fuel and injection
strategies on combustion characteristics and gaseous
emissions in diesel engines. Energy Sources, Part A:
Recovery,” Utilization, and Environmental Effects, p. 1-11,
2019.
]20[ D.C. Rakopoulos, C.D. Rakopoulos, E.G. Giakoumis,
A.M. Dimaratos, D.C. Kyritsis, “Effects of butanol–diesel
fuel blends on the performance and emissions of a highspeed DI diesel engine,” Energy Conversion and
Management, 51, p. 1989-1997, 2010.
]22[ C.D. Rakopoulos, A.M. Dimaratos, E.G. Giakoumis,
D.C. & Rakopoulos, “Investigating the emissions during
acceleration of a turbocharged diesel engine operating with
bio-diesel or n-butanol diesel fuel blends,” Energy 35, 12,
p. 5173-84, 2010.
]25[ M.A. Fayad, D. Fernández-Rodríguez, J.M. Herreros,
M. Lapuerta, A. Tsolakis, “Interactions between
aftertreatment systems architecture and combustion of
oxygenated fuels for improved low temperature catalysts
activity,” Fuel, 229, p. 189-197, 2018.
]24[ P. Pepiot-Desjardins, H. Pistch, R. Malhotra, S.R.
Kirby, A.L. Boehman, “Structural group analysis for soot
reduction tendency of oxygenated fuels,” Combustion and
Flame, 154, p. 191-205, 2008.
]23[ W.J. Lee, F.K. Wangi, W.H. Chen, S.L. Lin, Y.
Fukushima, et al., “Assessment of energy performance and
air pollutant emissions in a diesel engine generator fueled
with water-containing ethanol-biodiesel-diesel blend of
fuels,” Energy, 36, 9, p. 5591-9, 2011.
]23[ Z. Zhang, R. Balasubramanian, “Effects of
oxygenated fuel blends on carbonaceous particulate
composition and particle size distributions from a
stationary diesel engine,” Fuel, 141, p. 1-8, 2015.
]23[ M.A. Fayad, J.M. Herreros, F.J. Martos, A. Tsolakis,
“Role of Alternative Fuels on Particulate Matter (PM)
Characteristics and Influence of the Diesel Oxidation
Catalyst,” Environ. Sci. Tech., 49, 19, p. 11967-11973,
2015.
]28[ H. An, W. Yang, J. Li, D. Zhou, “Modeling study of
oxygenated fuels on diesel combustion: Effects of oxygen
concentration, cetane number and C/H ratio,” Energy
Conversion and Management, 90, p. 261-271, 2015.
]29[ C.J. Mueller, W.J. Pitz, L.M. Pickett, G.C. Martin,
D.L. Siebers, C.K. Westbrook, “Effects of oxygenates on
soot processes in DI diesel engines: Experiments and
numerical simulations,” SAE Technical Paper, p. 01-1791,
2003.
]51[ C.E. Dumitrescu, C.J. Mueller, E. Kurtz,
“Investigation of a tripropylene-glycol monomethyl ether
and diesel blend for soot-free combustion in an optical
direct-injection diesel engine,” Applied Thermal
Engineering, 101, p. 639-646, 2016.
]50[ C.K. Westbrook, W.J. Pitz, and H.J. Curran,
“Chemical kinetic modeling study of the effects of
oxygenated hydrocarbons on soot emissions from diesel
engines,” J. Phys. Chem. A, 110, 21, p. 6912-6922, 2006.
]52[ S.S. Gill, A. Tsolakis, J.M. Herreros, A.P.E. York,
“Diesel emissions improvements through the use of
biodiesel or oxygenated blending components,” Fuel, 95,
p. 578−586, 2011.
]55[ E.J. Barrientos, “Impact of Oxygenated Fuels on
Sooting Tendency and Soot Oxidative Reactivity with
Application to Biofuels,” [Ph.D. thesis]. 2014.
]54[ M. Lapuerta, M. Herreros, J.M. Lyons, L. Lisbeth,
García-Contreras, Reyes, Briceño, Yolanda, “Effect of the
alcohol type used in the production of waste cooking oil
biodiesel on diesel performance and emissions,” Fuel, 87,
15, p. 3161-3169, 2008.
]53[ M. Lapuerta, F. Oliva, J.R. Agudelo, A.L. Boehman,
“Effect of fuel on the soot nanostructure and consequences
on loading and regeneration of diesel particulate filters,”
Combustion and Flame, 159, 2, p. 844-853, 2012.
]53[ O.P. Bhardwaj, B. Lüers, B. Holderbaum, T. Koerfer,
S. Pischinger and M. Honkanen, “Utilization of HVO fuel
properties in a high efficiency combustion system: Part 2:
Relationship of soot characteristics with its oxidation
behavior in DPF,” SAE International Journal of Fuels and
Lubricants, 7, 2014-01-2846, p. 979-994, 2014.
]53[ K.K. Park, P.H. McMurry, “Structural properties of
diesel exhaust particles measured by transmission electron
microscopy (TEM): Relationships to particle mass and
mobility,” Aerosol Science and Technology, 38, 9, p. 881-
889, 2004.
]58[ J.J. Hwang, C. Bae, “Particulate morphology of waste
cooking oil biodiesel and diesel in a heavy duty diesel engine,” in International Conference on Optical Particle
Characterization (OPC 2014), International Society for
Optics and Photonics, 2014.
]59[ L. Qu, Z. Wang, H. Hu, X. Li, Y. Zhao, “Effects of
butanol on components and morphology of particles
emitted by diesel engines,” Research of Environmental
Sciences, 28, 10, p. 1518-1523, 2015.