An Experimental Investigation on Thermal Efficiency of Flat Plate Tube Solar Collector using Nanofluid with Solar Tracking Mechanism

[1] S. Kalogirou, “Solar thermal collectors and
applications,” Prog. Energy Combust. Sci., 30, 231–
295, 2004.
[2] S. Riffat, X. Zhao, P.S. Doherrty, “Developing a
theoretical model to investigate thermal performance
of a thin membrane heat-pipe solar collector,”Appl.
Therm. Eng., 25, 899–915, 2005.
[3] S. Kalogirou, “Prediction of flat plate collector
performance parameters using artificial neural
networks,” Sol. Energy, 80, 248–259, 2006.
[4] N. Kumar, T. Chavda, H.N. Mistry, “A truncated
pyramid non tracking type multipurpose solar
cooker/hot water system,” Appl. Energy, 87, 471–477,
2010.
[5] Z. Chen, S. Furbo, B. Perers, J. Fan, A. Andersen,
“Efficiencies of flat plate solar collectors at different
flow rates,” Energy Procedia, 30, 65–72,2012.
[6] M. Abdolzadeh, M.A. Mehrabian, “The optimal
slope angle for solar collectors in hot and dry parts of
Iran,” Energy Sources Part, A 34, 519–530, 2012.
[7] J. Duffie, W.A. Beckman, “Solar Engineering of
Thermal Processes,” 4th ed. Wiley, New York, 2013.
[8] L.M.Ayompe, A. “Duffy, Analysis of the thermal
performance of a solar water heating system with flat
plate collectors in a temperate climate,” Appl. Therm.
Eng., 58, 447–454, 2013.
[9] S. Choi, Z.G. Zhang, “Anomalous thermal
conductivity enhancement in nanotube suspensions,”
Appl. Phys. Lett., 79, 2252–2254, 2001.
[10] H. Tyagi, P. Phelan, R. Prasher,” Predicted
efficiency of a low-temperature nanofluid-based direct
absorption solar collector,” J. Sol. Energy Eng. , 131,
1-7, 2009.
[11] R. Taylor, T.P. Phelan, C.A. Otanicar, M. Walker,
S. Nguyen, Trimble, R.S. Parsher, “Applicability of
nanofluids in high flux solar collectors,” J. Renew.
Sustain. Energy, 3, 023104, 2011.
[12] D. Han, Z. Meng, D. Wu, C. Zhang, H. Zhu,”
Thermal properties of carbon black aqueous
nanofluids for solar absorption,” Nanoscale Res. Lett.,
6, 1–7, 2001.
[13] T. Yousefi, E. Shojaeizadeh, F. Veysi, S.
Zinadini, “An experimental investigation on the effect
of MWCNT-H2O nanofluid on the efficiency of flatplate
solar collectors,” Exp. Therm. Fluid Sci., 39, 207–212,
2012.
[14] T. Otanicar, J. Golden, “Comparative
environmental and economic analysis of conventional
and nanofluid solar hot water technologies,” Environ.
Sci. Technol., 43, 6082–6087, 2009.
[15] P. Phelan, T. Otanicar, R. Parsher, G.
Rosengarten, R. Taylor,”Nanofluid-based direct
absorption solar collector,” J. Renew. Sustain. Energy,
2, 033102, 2010.
[16] T. Yousefi, E. Shojaeizadeh, F. Veysi, S.
Zinadini, “An experimental investigation on the effect
of Al2O3-H2O nanofluid on the efficiency of flat plate
solar collector,” Renew. Energy, 39, 293–298, 2012.
[17] O. Mahian, A. Kianifar, A.Z. Sahin, S.
Wongwises, “Performance analysis of a minichannelbased solar collector using different nanofluids,”
Energy Convers. Manag., 88, 129–138, 2014.
[18] S. KumarVerma, Arun Kumar Tiwari, Durg
Singh Chauhan,” Experimental evaluation of flat plate
solar collector using nanofluids,” Energy Conversion
and Management, 134, 103–115, 2017
[19] M. Faizal, R. Saidur, S. Mekhilef, M.A.
Alim,”Energy, economic and environmental analysis
of metal oxides nano fluid for flat-plate solar
collector,” Energy Conversion and Management, 76,
162–168, 2013.
[20] M. Alim, Z. Abdin, R. Saidur, A. Hepbasli, M.A.
Khairul, N.A. Rahim,” Analyses of entropy generation
and pressure drop for a conventionalflat plate solar
collector using different types of metal oxide
nanofluids,” Energy and Buildings, 66 , 289–296,2013
[21] E. Arıkan, Serkan Abbasoglu and Mustafa Gazi,
“Experimental Performance Analysis of Flat Plate
Solar Collectors Using Different
Nanofluids,”sustanibility, 2-11, 2018.
[22] A. Tiwari, K. Pradyumna Ghosh, P., Sarkar, J.,
"Solar Water Heating Using Nanofluids–A
Comprehensive Overview And Environmental Impact
Analysis,” International Journal of Emerging
Technology and Advanced Engineering, 3(Special
Issue 3), 221 – 224, 2013.
[23] J. Golden, O.T., "Comparative environmental and
economic analysis of conventional and nanofluid solar
hot water technologies,” Environ. Sci. Technol., 43,
2015.
[24] P. Rhushi Prasad, H.V. Byregowda, P.B.
Gangavati,”Experiment Analysis of Flat Plate
Collector and Comparison of Performance with
Tracking Collector,” European Journal of Scientific
Research, Vol.40, No.1, 144 -155, 2010.
[25] P. Drago, “A simulated comparison of the useful
energy gain in a fixed and a fully tracking flat plate
collector,” Solar Energy, 1978.
[26] Y. Pavel, Gonzalez HJ, Vorobiev YV.,
“Optimization of the solar energy collection intracking
and non-tracking PV solar system,” Proceedings of the
1st international conferenceon electrical and
electronics engineering, ICEEE, 2004.
[27] S. Noor, ”Evaluation of experimental
performance of flat plate solar collector using different
bonding tubes at the absorber plate with tracking
system,” MSc. Thesis, Technology University,
Baghdad, 2016.
[28] P. John and P.D. Shima, “Termal properties of
nanofluids,” Advances in Colloidal and Interface
Surface, vol. 10, no. 4, 30–45, 2012.
[29] M. Chang, H. liu, H.S. Tai, “Preparation of
copper oxide nanoparticals and its application in
nanofluid,” Powder Technology, Vol. 207, 378-386,
2011.
[30] T. yousefi, veysi F., Shajaeizadeh E., Zinadinis
S., "An experimental investigation on effect of Al 2O3-
H2O nanofluid on the efficiency of flat-plate solar
collector,” Renewable energy, Vol.39, 293-298, 2012.
[31] F. Javadi S., Sadeghipour S., Saidur R.,
Boroumandjazi G., R13 ahmati B., Eilas M. M., Sohel
M.R., "The effects of nanofluid on thermophysical
properties and heat transfer characteristics of a plate
heat exchanger,” international communications in heat
and mass transfer,Vol.44, 58-63, 2013.
[32] ASHRAE Standard 93-86, “Methods of Testing
and Determine the Thermal Performance of Solar
Collectors,” ASHRAE, Atlanta, 2003.
[33] J. Duffie A., & Beckman, W. A., "Solar
engineering of thermal processes,” Wiley publication,
1991.
[34] C. Chon and Kihm KD., “Thermal conductivity
enhancement of nanofluids by Browian motion,”
Journal of Heat Transfer, 127, 8, 810, 2005.
[35] H. Qinbo, Shequan Zengand Shuangfeng Wang,
“Experimental investigation on the efficiency of flatplate solar collectors with nanofluids,” Applied
Thermal Engineering, 88, 165-171, 2015.
[36] C. Cristofari, G. Notton, P. Poggi, A.
Louche,”Modeling and performance of a copolymer
solar water heating collector,” Solar Energy, 72, 99-
112,2002.
[37] A. Mintsa, M. Medale, C. Abid,” Optimization of
the design of a polymer flat plate solar collector,”
Solar Energy, 87, 64-75, 2013.
[38] J. Koo, C. Kleinstreuer, “A new thermal
conductivity model for nanofluids,” Journal of
Nanoparticle Research, 6, 577-588, 2004.
[39] Y. Xuan, Q. Li, W. Hu, “Aggregation structure
and thermal conductivity of nanofluids,” AIChE
Journal, vol. 49, 1038-1043, 2003.
[40] S. SalavatiMeibodi, Ali Kianifar, Hamid
Niazmand, OmidMahian, and Somchai Wongwises,
“Experimental investigation on the thermal efficiency
and performance characteristics of a flat plate solar
collector using SiO2/EG–water nanofluids,”
Int.Communications in Heat and Mass Transfer,
65,71–75, 2015.
[41] A. Noghrehabadi, Ebrhim Hajidavaloo and
Mojtaba Moravej, “Experimental investigation of
efficiency of square flat-plate solar collector using
SiO2/water nanofluid,” Case Studies in Thermal
Engineering, 8, 378–386, 2016.