The Synergic Effect of Fly Ash and High Reactivity Attapulgite in Ternary Blended Cement

[1] C. R. Gagg,” Cement and concrete as an
engineering material: An historic appraisal and
case study analysis”, Elsavir, Engineering Failure
Analysis, Vol. 40, May 2014, pp. 114-140.
[2] P.K Mehta,” Greening of concrete industry for
sustainable development”, 2002, 24, pp.23-28.
[3] Global Cement Market Trends, Share, Size,
Growth, Opportunity and Forecasts 2019-2024”,
February,2019.
https://www.researchandmarkets.com/research/nr
b3b7/global_cement?w=12
[4] C. Shia, F. Jiménez, A. Palomob,” New
cements for the 21st century: The pursuit of an
alternative to Portland cement”, Cement and
Concrete Research, Vol. 41, Issue 7, July 2011,
pp.750-763.
[5] M. D. A. Thomas, M. H. Shehata, S. G.
Shashiprikash,” The use of fly ash in concrete:
classification by composition”, Cem Concr Aggr
1999;21(2):105–10.
[6] Ghosh SN, Sarkar LS, Mineral admixtures in
cement and concrete. In: Progress in cement and
concrete, 1st ed. New Delhi: ABI Books; 1993,
pp. 565.
[7] R.K. Dhir, M. R. Jones,”Development of
chloride-resisting concrete using fly ash Fuel”,
1999; 78(2):137–42.
[8] K. Mala, A. K. Mullick, K. K. Jain, and P. K.
Singh,” Effect of Relative Levels of Mineral
Admixtures on Strength of Concrete with Ternary
Cement Blend”, International Journal of Concrete Structures and Materials, Vol.7, No.3, September
2013, pp.239–249.
[9] S. Antiohos, K. Maganari, S. Tsimas,”
Evaluation of blends of high and low calcium fly
ashes for use as supplementary cementing
materials”, Cement & Concrete Composites 27
(2005), 349–356.
[10] M. Khokhar, E. Rozière, P. Turcry, F.
Grondin, A. Loukili,” Mix design of concrete
with high content of mineral additions:
Optimisation to improve early age strength”,
Cement and Concrete Composites, Elsevier,
2010, 32 (5), pp.377-38
[11] Iraqi standard Specification No.5/1984
“Portland Cement” Central Orgnanization for
Standardization and Quality Control, Baghdad.
[12] Iraqi Standard Specification No.45/1984
“Aggregate of Natural Sources Using in Concrete
and Building” Central Orgnanization for
Standardization and Quality Control, Baghdad.
[13] K. J. Frayyeh, W. A. Abbas and S. H. Malik,
”Investigation About the Iraqi Attapulgite Clay as
a Mineral Admixture for Concrete”, Eng & Tech.
J., Vol.32, part (A), No.10,( 2014).
[14] ASTM C 618 – 05" Standard Spcification for
Coal Fly Ash and Raw or Calcined Natural
Pozzolan for Use in Concrete", Annual Book of
ASTM Standards, 2003.
[15] S., Goyal, M. Kumar, & B. Bhattacharjee,
“Effect of relative proportion of pozzolana on
compressive strength of concrete under different
curing conditions”, International Journal of
Engineering, 2(1) (2008), 20–34.
[16] A. M. Neville, "Properties of Concrete",
Fourth and Final Edition Standards updated to
2002, pp.654-655.
[17] W. A. Abbas, K. J. Frayyeh and S. J. AlObaidey, ” The Effect of Using Multi Types of
Mineral Admixtures on Some Properties of
Lightweight Self-Compacting Concrete”,
Engineering and Technology Journal, Vol. 37,
Part C, No. 1, 2019
[18] R.T. Hemmings, E. E. Berry, “On the glass
in coal fly ashes: recent advances”, Presented at
the MRS Symposium, Vol. 113. Pittsburgh, USA;
1988, pp 3.
[19] A. L. A. Fraay, J. M. Bijen, Y. M. de Haan, “
The reaction of fly ash in concrete. A critical
examination” Cement and Concrete Research
19(2):235-246. Mar 1989.
[20] A. M. Caldarone,” High-Strength Concrete -
A Practical Guide”, First Edition, 2009, pp. 33-
39.
[21] K. J. Frayyeh, W. A. Abbas and S. J. AlObaidey, “Fresh and hardened properties of
lightweight self-compacting concrete containing
attapulgite”, Eng & Tech. J., Vol.34, part (A),
No. 9, (2016).
[22] C.K. Sridhar, S.B. Vanakudre,” Strength
Efficiency Factor for Nano Silica at Different
Age”, Journal of Civil Engineering and
Environmental Technology, Print ISSN: 2349-
8404; Online ISSN: 2349-879X; Volume 1,
Number 3; pp. 32-35, August, 2014.
[23] V.G. Papadakis, S. Antiohos, S. Tsimas,”
Supplementary cementing materials in concrete
Part II: A fundamental estimation of the
efficiency factor”, Cement and Concrete
Research, 32, (2002), 1533–1538.
[24] J. Bolomey,” Determination of the
compressive strength of mortars and concretes”
Bull Tech Suisse Romande, 1927; 16 (22 and 24).