- All Journals
- Al-Qadisiyah University
- Basrah University
- Kirkuk University
- Mosul University
- The Iraqi Borad for Medical Specialization
- University of Anbar
- University of Technology
- Al Mustafa University
- Al-Zahraa University for Women
- Alnoor University
- Kunooz University
- Misan University
- Ninevah University
- Tikrit University
- University of Al-Hamdaniya
- University of Kerbala
Optimization of Cutting Parameters in Milling Process Using Genetic Algorithm and ANOVA (March 2020) | ||
| Engineering and Technology Journal | ||
| Article 9, Volume 38, 10A, 2020, Pages 1489-1503 PDF (1.37 M) | ||
| Document Type: Research Paper | ||
| DOI: 10.30684/etj.v38i10A.1124 | ||
| Author | ||
| Marwa Q. Ibraheem | ||
| Department of production engineering and metallurgy, University of Technology, Baghdad, Iraq. | ||
| Abstract | ||
| In this present work use a genetic algorithm for the selection of cutting conditions in milling operation such as cutting speed, feed and depth of cut to investigate the optimal value and the effects of it on the material removal rate and tool wear. The material selected for this work was Ti-6Al-4V Alloy using H13A carbide as a cutting tool. Two objective functions have been adopted gives minimum tool wear and maximum material removal rate that is simultaneously optimized. Finally, it does conclude from the results that the optimal value of cutting speed is (1992.601m/min), depth of cut is (1.55mm) and feed is (148.203mm/rev) for the present work. | ||
| Keywords | ||
| Milling; cutting conditions; Genetic algorithms | ||
| References | ||
|
[1] P. Palanisamy. I. Rajendran. S. Shanmugasundaram, “Optimization of machining parameters using genetic algorithm and experimental validation for end-milling operations,” International Journal of Advanced Manufacturing Technology, January, 2007. [2] Z.A. Zoya and R. Krishnamurty, “The performance of CBN tools in the machining of titanuim alloys,” Journal of Materials Processing Technology, vol. 100, pp. 80-86, 2000. [3] L.N. Lacalle, J. Perez, J.I. Llorente, J.A. Sanchez, “Advanced cutting conditions for the milling of aeronautical alloys,” Journal of Materials Processing Technology, vol. 100, pp. 1-11, 2000. [4] B. S. Reddy, J. S. Kumar and K. V. K. Reddy, “Optimization of surface roughness in CNC end milling using response surface methodology and genetic algorithm,” International Journal of Engineering, Science and Technology, vol. 3, no. 8, pp. 102-109, 2011. [5] A. Sonmez, A. Baykasoglu, T. Dereli, I. H. Filiz, “Dynamic optimization of multipass milling operations via geometric programming,” International Journal of Machine Tools and Manufacture, vol. 39, no. 2, pp. 297–320, 1999. [6] D. Kim and M. Ramulu, “Drilling process optimization for graphite/ bismaleimide - titanium alloy stacks,” Composite Structure, vol. 63, pp. 101–104, 2004. [7] Z. G. Wang, Y. S. Wong, M. Rahman, “Optimization of multipass milling using genetic algorithm and genetic simulated annealing,” International Journal of Advanced Manufacturing Technology, 24(9–10), pp. 727–732, 2004. [8] M. R. Tolouei and M. Bidhendi, “On the optimization of machining parameters for milling parameters,” International Journal of Machine Tools and Manufacture, 37(1)1–16, 1997. [9] S. K. Choudhury, I. V. Rao, “Optimization of cutting parameters for maximizing tool life,” International Journal of Machine Tools and Manufacture, vol. 39, no. 2, pp. 343–353, 1999. [10] P. V. Suresh, P. R. Venkateshwara, S. G. Deshmukh, “A genetic algorithmic approach for optimization of surface prediction model,” International Journal of Machine Tools and Manufacture, vol. 42, no. 6, pp. 675–680, 2002. | ||
|
Statistics Article View: 325 PDF Download: 355 |
||