[1] M. A.Abd Elaty, M. F. Ghazy, and M. F. Abd El Hameed, ―Optimization of Geopolymer concrete by principal component analysis,‖ ACI Materials Journal, Vol. 114, No. 2, pp.253-264, 2017.DOI: 10.14359/51689563.
[2] Parveen, D. Singhal, M. T. Junaid, B. B. Jindal, and A. Mehta, ―Mechanical and microstructural properties of fly ash based Geopolymer concrete incorporating alccofine at ambient curing‖, Construction and Building Materials, Vol. 180, pp. 298-307, August 2018.DOI: 10.1016/j.conbuildmat.2018.05.286.
[3] J. He, ―Synthesis and characterization of Geopolymers for infrastructural applications‖, Ph.D. Thesis, Civil and Environmental Engineering Dept., Louisiana State Univ., USA, 2012.
[4] M. Adamson, A. Razmjoo, and A. Poursaee, ―Durability of concrete incorporating crushed brick as coarse aggregate,‖ Construction and Building Materials, Vol. 94, pp. 426-432, July, 2015.DOI: 10.1016/j.conbuildmat.2015.07.056.
[5] R. Sharma, and P. P. Bansal, ―Use of different forms of waste plastic in concrete – A review,‖ Journal of Cleaner Production, Vol. 112, part 1 , pp. 473- 482, 2016.DOI: 10.1016/j.jclepro.2015.08.042.
[6] United Nations Environment Programme (UNEP), ―Single-use plastics: A road map for sustainability,‖ 2018.
[7] Kewal1, S. K. Sharma, and H. Gupta, ―Development of paver block by using foundry sand based Geopolymer concrete,‖ Journal of Today’s Ideas – Tomorrow’s Technologies, Vol. 3, No. 2, pp. 129–144, December, 2015.DOI: 10.15415/jotitt.2015.32009.
[8] R. Muhammed and D. Varkey, ―An experimental study on fly ash based Geopolymer pavement block with polypropylene fiber‖, International Journal of Innovative Science, Engineering & Technology, Vol. 3, Issue 8, pp. 548-553, 2016.
[9] B. S. Mohammed, M. S. Liewa, W. S. Alaloula, A. Al-Fakiha, W. Ibrahima and M .Adamua, ―Development of rubberized Geopolymer interlocking bricks‖, Case Studies in Construction Materials, Vol. 8, pp. 401-408, 2018.DOI:10.1016/j.cscm.2018.03.007.
[10] Iraqi specification No.1606 (IQ.S 1606) ―Concrete pavement bricks,‖ Central Organization for Standardization and Quality Control, Bagdad, 2006.
[11] ASTM C618, ―Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete,‖ American Society for Testing and Materials, 2017.
[12] Iraqi specification No.45 (IQ.S 45) ―Aggregate from Natural Sources for Concrete and Construction,‖ Central Organization for Standardization and Quality Control, Bagdad, 1984.
[13] W. I. Khalil, Q. J. Frayyeh, and M. F. Ahmed, ―Evaluation of sustainable Metakaolin-Geopolymer concrete with crushed waste clay brick‖, The 2nd int. conference on sustainable engineering techniques-ICSET, Baghdad, Iraq, 2019. DOI:10.1088/1757-899X/518/2/022053.
[14] W. I. Khalil, Q. J. Frayyeh, and M. F. Ahmed, ―Sustainable Metakaolin-based Geopolymer concrete with waste plastic aggregate,‖ The 4th int. sustainable buildings symposium-ISBS, Dallas, Texas, USA, 2019.DOI: http://dx.doi.org/10.5772/intechopen.87836
[15] M. F. Ahmed, W. I. Khalil, and Q. J. Frayyeh, ―Blended Metakaolin and waste clay brick powder as source material in sustainable Geopolymer concrete,‖ 10th int. structural engineering and construction conference-(ISEC 10), Chicago, United States, May 20-25, 2019. DOI: 10.14455/ISEC.res.2019.31.
[16] BS EN 1338, ―Concrete paving blocks — Requirements and test methods,‖ British Standard, 2003.
[17] K. J. Khalaf, ―Studying the utilization of polymeric wastes to produce sustainable concrete,‖ MSc. Thesis, Building & Construction Dept., Univ. of Technology, Iraq, 2015.