Effect of Recycled Low-Density Polyethylene and Waste Paper Fiber on Stone Matrix Asphalt

[1]  AASHTO, AASHTO M 325-08 'Standard Specification for Stone Matrix Asphalt'. 2012. 
[2]  Blazejowski, K., Stone matrix asphalt: Theory and practice. 2019: CRC Press. 
[3]  Manosalvas-Paredes, M., J. Gallego, L. Saiz and J.M. Bermejo, Rubber modified binders as an 
alternative to cellulose fiber – SBS polymers in Stone Matrix Asphalt. Construction and 
Building Materials, 2016. 121: p. 727-732. 
[4]  Sheng, Y., H. Li, P. Guo, G. Zhao, H. Chen and R. Xiong, Effect of Fibers on Mixture Design 
of Stone Matrix Asphalt. Applied Sciences, 2017. 7(3). 
[5]  Jamieson, S., G.J.R.M. White and P. Design, Review of stone mastic asphalt as a high
performance ungrooved runway surfacing. 2020. 21(4): p. 886-905. 
[6]  Cooley Jr, L.A. and G.C.J.N.C.f.A.T. Hurley, Auburn University, Alabama, Potential of using 
stone matrix asphalt (SMA) in Mississippi. 2004.
[7]  Mahrez, A. and M.R.J.I.J.o.t.P.S. Karim, Fatigue characteristics of stone mastic asphalt mix 
reinforced with fiber glass. 2010. 5(12): p. 1840-1847. 
[8]  Devulapalli, L., S. Kothandaraman and G. Sarang, Evaluation of rejuvenator’s effectiveness on 
the reclaimed asphalt pavement incorporated stone matrix asphalt mixtures. Construction and 
Building Materials, 2019. 224: p. 909-919. 
[9]  Boscaino, G., F.G. Praticò and R. Vaiana. Tyre/road noise on different road pavements: 
Synergetic influence of acoustical absorbing coefficient and surface texture. in Proceedings 
of the 10th EAEC European Congress, Belgrade, Serbia. 2005. 
[10]  Woodward, D., P. Millar, C. Lantieri, C. Sangiorgi and V. Vignali, The wear of Stone Mastic 
Asphalt due to slow speed high stress simulated laboratory trafficking. Construction and 
Building Materials, 2016. 110: p. 270-277. 
[11]  Cooley Jr Allen, H.G.C.J.U.N.C.f.A.T.P., Potential of using stone matrix asphalt (SMA) in 
Mississippi. 2010. 
[12]  Xue, Y., H. Hou, S. Zhu and J. Zha, Utilization of municipal solid waste incineration ash in 
stone mastic asphalt mixture: Pavement performance and environmental impact. Construction 
and Building Materials, 2009. 23(2): p. 989-996. 
[13]  Liu, Y., Y. Huang, W. Sun, H. Nair, D.S. Lane and L. Wang, Effect of coarse aggregate 
morphology on the mechanical properties of stone matrix asphalt. Construction and Building 
Materials, 2017. 152: p. 48-56. 
[14]  Devulapalli, L., S. Kothandaraman and G. Sarang, Effect of rejuvenating agents on stone matrix 
asphalt mixtures incorporating RAP. Construction and Building Materials, 2020. 254. 
[15]  Sarang, G., B.M. Lekha, J.S. Geethu and A.U.R. Shankar, Laboratory performance of stone 
matrix asphalt mixtures with two aggregate gradations. Journal of Modern Transportation, 
2015. 23(2): p. 130-136. 
[16]  Slebi-Acevedo, C.J., P. Lastra-González, P. Pascual-Muñoz and D. Castro-Fresno, Mechanical 
performance of fibers in hot mix asphalt: A review. Construction and Building Materials, 
2019. 200: p. 756-769. 
[17]  Xiong, R., J. Fang, A. Xu, B. Guan and Z. Liu, Laboratory investigation on the brucite fiber 
reinforced asphalt binder and asphalt concrete. Construction and Building Materials, 2015. 
83: p. 44-52. 
[18]  Mohammed, M., T. Parry and J. Grenfell, Influence of fibres on rheological properties and 
toughness of bituminous binder. Construction and Building Materials, 2018. 163: p. 901-911. 
[19]  Fitzgerald, R.L., Novel applications of caron fiber hot mix asphalt reinforcement and carbon
carbon pre-forms. 2000, Michigan Technological University Michigan.
[20]  Al-Hadidy, A., T.J.M. Yi-Qiu and Design, Mechanistic approach for polypropylene-modified 
flexible pavements. 2009. 30(4): p. 1133-1140. 
[21]  Mokhtari, A. and F.M. Nejad, Mechanistic approach for fiber and polymer modified SMA 
mixtures. Construction and Building Materials, 2012. 36: p. 381-390 %@ 0950-0618. 
[22]  Andrés-Valeri, V.C., J. Rodriguez-Torres, M.A. Calzada-Perez and J. Rodriguez-Hernandez, 
Exploratory study of porous asphalt mixtures with additions of reclaimed tetra pak material. 
Construction and Building Materials, 2018. 160: p. 233-239 %@ 0950-0618. 
[23]  Badry, M.M.M., A. Dulaimi, H.K. Shanbara, S. Al-Busaltan and T. Abdel-Wahed, Effect of 
Polymer on the Properties of Bitumen and Pavement Layers, Case Study: Expressway No.1, 
Republic of Iraq. IOP Conference Series: Materials Science and Engineering, 2021. 1090(1): 
p. 012032. 
[24]  Yildirim, Y., Polymer modified asphalt binders. Construction and Building Materials, 2007. 
21(1): p. 66-72 %@ 0950-0618. 
[25]  Arabani, M. and S.A. Tahami, Assessment of mechanical properties of rice husk ash modified 
asphalt mixture. Construction and Building Materials, 2017. 149: p. 350-358. 
[26]  Punith, V.S. and A. Veeraragavan, Behavior of asphalt concrete mixtures with reclaimed 
polyethylene as additive. Journal of materials in civil engineering, 2007. 19(6): p. 500-507 
%@ 0899-1561. 
[27]  Arabani, M. and S.A. Tahami, Assessment of mechanical properties of rice husk ash modified 
asphalt mixture. Construction and Building Materials, 2017. 149: p. 350-358 %@ 0950-0618. 
[28]  Al-Hadidy, A.I. and T. Yi-qiu, Effect of polyethylene on life of flexible pavements. 
Construction and Building Materials, 2009. 23(3): p. 1456-1464. 
[29]  Kumar, P., S. Chandra and S. Bose, Laboratory investigations on SMA mixes with different 
additives. International Journal of Pavement Engineering, 2007. 8(1): p. 11-18. 
[30]  Tayfur, S., H. Ozen and A. Aksoy, Investigation of rutting performance of asphalt mixtures 
containing polymer modifiers. Construction and Building Materials, 2007. 21(2): p. 328-337 
%@ 0950-0618. 
[31]  Behbahani, H., S. Nowbakht, H. Fazaeli and J.J.J.o.A.S. Rahmani, Effects of fiber type and 
content on the rutting performance of stone matrix asphalt. 2009. 9(10): p. 1980-1984. 
[32]  Pasandín, A.R., I. Pérez, A. Ramírez and M.M. Cano, Moisture damage resistance of hot-mix 
asphalt made with paper industry wastes as filler. Journal of Cleaner Production, 2016. 112: 
p. 853-862. 
[33]  Chew, J.W., S. Poovaneshvaran, M.R. Mohd Hasan, M.O. Hamzah, J. Valentin and A. Sani, 
Microscopic analysis and mechanical properties of Recycled Paper Mill Sludge modified 
asphalt mixture using granite and limestone aggregates. Construction and Building Materials, 
2020. 243. 
[34]  Christensen Jr, D., T. Pellinen and R.J.J.o.t.A.o.A.P.T. Bonaquist, Hirsch model for estimating 
the modulus of asphalt concrete. 2003. 72. 
[35]  You, Z. and Q.J.C.J.o.C.E. Dai, Dynamic complex modulus predictions of hot-mix asphalt using 
a micromechanical-based finite element model. 2007. 34(12): p. 1519-1528. 
[36]  Goh, S.W., Z. You, R.C. Williams and X.J.J.o.T.E. Li, Preliminary dynamic modulus criteria 
of HMA for field rutting of asphalt pavements: Michigan’s experience. 2011. 137(1): p. 37
45. 
[37]  Harvey, J., K. Eriksen, J. Sousa and C.L.J.T.R.R. Monismith, Effects of laboratory specimen 
preparation on aggregate-asphalt structure, air-void content measurement, and repetitive 
simple shear test results. 1994(1454). 
[38]  Hinrichsen, J. and J. Heggen. Minimum VMA in HMA based on gradation and volumetric 
properties. in Proceedings of the 75th Transportation Research Board Annual Meeting, 
Washington, DC, USA. 1996. 
[39]  Coree, B. and W.P. Hislop, A laboratory investigation into the effects of aggregate-related 
factors of critical VMA in asphalt paving mixtures. 2000. 
[40]  Sengoz, B., A.J.B. Topal and Environment, Minimum voids in mineral aggregate in hot-mix 
asphalt based on asphalt film thickness. 2007. 42(10): p. 3629-3635. 
[41]  Christensen, D.J.A.A.T., LLC, Draft final report to the National Cooperative Highway Research 
Program (NCHRP) on Project NCHRP 9-33: A mix design manual for hot mix asphalt. 2009. 
[42]  ASTM, ASTM D5-D5M - 13 'Standard test method for penetration of bituminous materials'. 
2013. 
[43]  ASTM, ASTM D 36 – 95 (Reapproved 2000) 'Standard test method for softening point of 
bitumen (ring-and-ball apparatus)'. 2009a. 
[44]  ASTM, ASTM D 113 - 07 'Standard test method for ductility of bituminous materials'. 2007. 
[45]  ASTM, ASTM D92-05 'Standard Test Method for Flash and Fire Points by Cleveland Open 
Cup Tester'. 2005. 
[46]  ASTM, ASTM D70 - 09'Standard Test Method for Density of Semi-Solid Bituminous Materials 
(Pycnometer Method)'. 2009. 
[47]  ASTM, ASTM D4402-02 'Standard test method for viscosity determination of asphalt at 
elevated temperatures using a rotational viscometer'. 2002. 
[48]  ASTM, ASTM D1754/D1754M − 09 (Reapproved 2014) 'Standard test method for effects of 
heat and air on asphaltic materials (Thin-Film Oven Test)'. 2014.
[49]  Cong, P., J. Wang, K. Li and S. Chen, Physical and rheological properties of asphalt binders 
containing various antiaging agents. Fuel, 2012. 97: p. 678-684. 
[50]  Zhang, H., Z. Chen, G. Xu and C. Shi, Physical, rheological and chemical characterization of 
aging behaviors of thermochromic asphalt binder. Fuel, 2018. 211: p. 850-858. 
[51]  Institute, A., MS-2 Asphalt Mix Design Methods. 2014. 
[52]  GSRB, GSRB 2003 'Standard specifications for roads & bridges'. 2003. 
[53]  ASTM, ASTM C127 − 15 'Standard test method for relative density (specific gravity) and 
absorption of coarse aggregate'2015. 
[54]  ASTM, ASTM C131-03 'Standard test method for resistance to degradation of small-size coarse 
aggregate by abrasion and impact in the Los Angeles Machine'. 2003a. 
[55]  ASTM, ASTM D5821-13 'Standard test method for determining the percentage of fractured 
particles in coarse aggregate'. 2013. 
[56]  Xue, Q., X.-t. Feng, L. Liu, Y.-j. Chen and X.-L. Liu, Evaluation of pavement straw composite 
fiber on SMA pavement performances. Construction and Building Materials, 2013. 41: p. 
834-843. 
[57]  Ahmadinia, E., M. Zargar, M.R. Karim, M. Abdelaziz and E. Ahmadinia, Performance 
evaluation of utilization of waste Polyethylene Terephthalate (PET) in stone mastic asphalt. 
Construction and Building Materials, 2012. 36: p. 984-989. 
[58]  Dalhat, M.A., S.A. Osman, A.-A.A. Alhuraish, F.K. Almarshad, S.A. Qarwan and A.Y. 
Adesina, Chicken Feather fiber modified hot mix asphalt concrete: Rutting performance, 
durability, mechanical and volumetric properties. Construction and Building Materials, 2020. 
239. 
[59]  Rahman, M.T., A. Mohajerani and F. Giustozzi, Possible use of cigarette butt fiber modified 
bitumen in stone mastic asphalt. Construction and Building Materials, 2020. 263: p. 120134. 
[60]  Othman, A.M.J.J.o.M.i.C.E., Effect of low-density polyethylene on fracture toughness of 
asphalt concrete mixtures. 2010. 22(10): p. 1019-1024. 
[61]  Akinci, A., S. Yilmaz and U. Sen, Wear Behavior of Basalt Filled Low Density Polyethylene 
Composites. Applied Composite Materials, 2011. 19(3-4): p. 499-511. 
[62]  Yan, K., H. Xu and L. You, Rheological properties of asphalts modified by waste tire rubber 
and reclaimed low density polyethylene. Construction and Building Materials, 2015. 83: p. 
143-149. 
[63]  Iastremskii, D. and T. Abaidullina, Studying the Effect of Cellulose Containing Stabilizing 
Additives on the Bitumen Properties in SMA, in International Scientific Conference Energy 
Management of Municipal Facilities and Sustainable Energy Technologies EMMFT 2018. 
2020. p. 900-907.
[64]  Al-Busaltan, S., R. Al-Yasari, O. Al-Jawad, B.J.I.J.o.P.R. Saghafi and Technology, Durability 
assessment of open-graded friction course using a sustainable polymer. 2020. 13(6): p. 645
653. 
[65]  Mahdy, R., S. Al-Busaltan and O. Al-Jawad, Functionality properties of Open Grade Friction 
Course asphalt mixtures using sustainable materials:  Comparison Study. 19th Annual 
International Conference on Highways and Airport Pavement Engineering, Asphalt 
Technology, and Infrastructure International Conference, March 2020, , 2020. 
[66]  Abduljabbar, N., S. Al-busaltan, A. Dulaimi and O. Aljawad, EVALUATING OF AGING 
BEHAVIOR OF THIN ASPHALT OVERLAY MODIFIED WITH SUSTAINABLE 
MATERIALS. International Journal on Pavement Engineering & Asphalt Technology, 2020. 
20: p. 162-173. 
[67]  Al-Busaltan, S., R. Al-Yasari, O. Al-Jawad and B. Saghafi, Durability assessment of open
graded friction course using a sustainable polymer. International Journal of Pavement 
Research and Technology, 2020. 13(6): p. 645-653. 
[68]  AASHTO, AASHTO R46-08 "Standard Practice for Designing Stone Matrix Asphalt"2001. 
[69]  AASHTO, ASSHTO T-166 "Standard Method of Test For Bulk Specific Gravity of Compacted 
Hot-Mix Asphalt Using Saturated Surface -Dry Specimens". 2005. 
[70]  ASTM, Standard test method for Marshall stability and flow of asphalt mixtures. 2015. 
[71]  Ahmad, M.S.J.I.J.o.E.T. and Technology, Low density polyethylene modified dense graded 
bituminous macadam. 2014. 16: p. 366-372. 
[72]  Punith, V. and A. Veeraragavan, Behavior of reclaimed polyethylene modified asphalt cement 
for paving purposes. Journal of Materials in Civil Engineering, 2011. 23(6): p. 833-845. 
[73]  Ahmadinia, E., M. Zargar, M.R. Karim, M. Abdelaziz and P. Shafigh, Using waste plastic 
bottles as additive for stone mastic asphalt. Materials & Design, 2011. 32(10): p. 4844-4849. 
[74]  Hameed, A., S. Al-Busaltan, A. Dulaimi, M.A. Kadhim and R. Al-Yasari, Evaluating Modified 
Asphalt Binder Comprising Waste Paper Fiber and Recycled Low-Density Polyethylene. 
Journal of Physics: Conference Series, 2021. 1973(1): p. 012237. 
[75]  Azarhoosh, A., G.H. Hamedi and M.J.J.T.J.o.A. Azarhoosh, The influence of cohesion and 
adhesion parameters on the moisture sensitivity of modified Asphalt mixtures with polymer 
additive. 2020: p. 1-23. 
[76]  Wu, S., Q. Ye and N. Li, Investigation of rheological and fatigue properties of asphalt mixtures 
containing polyester fibers. Construction and Building Materials, 2008. 22(10): p. 2111-2115 
%@ 0950-0618.
[77]  Mojabi, S.A., A.A. kordani and B. Mirbaha, Laboratory investigation of stone matrix asphalt 
modified with SBS polymer and C25 fiber in using the semi-circular bend geometry (SCB) 
and moisture susceptibility. Construction and Building Materials, 2020. 261.