- All Journals
- Al-Qadisiyah University
- Basrah University
- Kirkuk University
- Mosul University
- The Iraqi Borad for Medical Specialization
- University of Anbar
- University of Technology
- Al Mustafa University
- Al-Zahraa University for Women
- Alnoor University
- Kunooz University
- Misan University
- Ninevah University
- Tikrit University
- University of Al-Hamdaniya
- University of Kerbala
Wear Rate Behavior of Unsaturated Polyester Reinforced with (Glass and Rock Wool Fiber) under the Influence of Chemical Solutions | ||
| Journal of University of Anbar for Pure Science | ||
| Article 21, Volume 14, Issue 2, 2020, Pages 51-54 PDF (1.23 M) | ||
| Document Type: Research Paper | ||
| DOI: 10.37652/juaps.2022.172387 | ||
| Authors | ||
| Mustafa Ismael* ; Faik.Hammad. Anter | ||
| Department of physics, College of science, University Of Anbar, Iraq | ||
| Abstract | ||
| In this research, the adhesive wear of a composite material consisting of unsaturated polyester has been studied as a matrix material reinforced by glass fiber and rock wool fibers. The wear rate property is compared in the normal condition and after immersion in (NaOH) and (HCl) solutions at normality (0.3N) and the laboratory temperature (25 oC) for 30 (days) and with a fixed volume fraction of (20%). The results showed that the wear rate decreased with increasing number of reinforcement layers before and after immersion and for all samples. However, it is noted that immersion in chemical solutions leads to an increase in wear rate compared that of the normal condition and for all samples. | ||
| Keywords | ||
| unsaturated polyester. wear rate. glass fiber. rock wool fibers. chemical solutions | ||
| References | ||
|
]1[ Deyaa. B. M., and Abdul Hussein. H. J., 2009, "Wear Resistance for Thermosetting Polymer Blend",Eng. & Tech. Journal, Vol. 27, No. 14, PP. 507 - 516.
]2 [Hassan. H. S., 2014, "Study of mechanical properties for unsaturated polyester reinforced with glass fiber", Journal of University of Anbar for pure science, Vol. 8, No.2, PP. 91- 96.
]3 [Al-rawi. K. R., and Majeed. N. H., 2015, "Mechanical and thermal properties of epoxy-graphite composites", Baghdad Journal of Science, , Vol. 12, No .1, PP. 40- 45.
]4[ Quintelier. J., and Samyan P., 2007, "Materials science Forum", Vol. 561, PP, (635-638).
]5 [Mahmood. A. H., and Anter. F. H., 2013, "Study wear resistance and hardness property for polymeric blends", Journal of University of Anbar for pure science, Vol. 7, No. 1, PP. 194 -203.
]6[ Groover M,. 1996, "Fundamentals Modern Manufacturing ", Prentice Hall, Upper Saddle Rivers, Newjerscy.
]7[Atta. A. S., Nasser N. J., and Abd-lrazaq E. A., 2015, "Studying the effect of adding different fiber types to polyester composite on the adhesive wear property", Al-Qadisiyah Journal of Engineering Sciences, Vol. 8, No. 1, PP. 1- 14.
]8 [Abbas. R. A., Sahib. M. A., and Dyaa. B. M., 2010, "Study of adhesive wear of epoxy reinforced with glass fibers composite material", Nahrain University, College of Engineering Journal, Vol. 13, No. 1, PP. 116-130.
]9[ Apicella. A., Miqliaresi. C., Nicodemo. C., Nicolais. L., Lucerino. I., and Roccotelli. S., 1982, "Composites ", Vol. 13, No. 4 , PP. 406 -410.
| ||
|
Statistics Article View: 460 PDF Download: 323 |
||