- All Journals
- Al-Qadisiyah University
- Basrah University
- Kirkuk University
- Mosul University
- The Iraqi Borad for Medical Specialization
- University of Anbar
- University of Technology
- Al Mustafa University
- Al-Zahraa University for Women
- Alnoor University
- Kunooz University
- Misan University
- Ninevah University
- Tikrit University
- University of Al-Hamdaniya
- University of Kerbala
An Enhanced Industrial Wireless Communication Network for Hard Real Time Performance Substation Automation Purposes | ||
| Al-Rafidain Engineering Journal (AREJ) | ||
| Article 21, Volume 27, Issue 2, 2022, Pages 216-226 PDF (1.1 M) | ||
| Document Type: Research Paper | ||
| DOI: 10.33899/rengj.2022.133860.1173 | ||
| Authors | ||
| Firas S. Alsharbaty* 1; Qutaiba I. Ali2 | ||
| 1Electrical Engineering Departement, Collage of Engineering, University of Mosul, Mosul, Iraq | ||
| 2computer engineering, college of engineering, university of Mosul, Mosul, Iraq | ||
| Abstract | ||
| Wireless communication network (WCN) technologies are charming solutions to bolster the conventional electrical substations with the intention of take the fashion of smart substation such as reduction in equipment, minimize the maintenance costs, flexibility, and expansion. However, the harsher challenge facing WCN employing in the electrical substation is the real time protection of substation automation system (SAS) for the high voltage devices in terms of the latency and the reliability in particular the substations of old topologies. This work suggests WCN including special types of the intermediate devices (Switched-Access Points (S-AP) and Multi Wireless Domain- Access Point (MWD-AP)) to address the expected packets congestion by creating independent wireless channels domains offering wireless channels reliability in such network topology that deals with real time data traffic (RT) and the non-real time data traffic (NRT). Riverbed modeler is adopted to simulate the model of the electrical substation network due to the rich tools of communication networks in term of industry environment. The results indicate, the suggested WCN can handle the hard real time requirements of protection from latency and data reliability points of view in case of basic capacity of 802.11a/n standards at the level of ≤ 4 msec and high data reliability. | ||
| Keywords | ||
| Merging Unit (MU); Real time data traffic (RT); Smart substation; Substation automation system (SAS); Wireless communication network (WCN) | ||
| References | ||
|
[1] Y. Edalat, O. Katia, and Jong-Suk Ahn. "Smart adaptive collision avoidance for IEEE 802.11." Ad Hoc Networks, Vol. 124 , 2022.
[2] V. Sharma, J. Malhotra, and H. Singh, “Quality of Service (QoS) evaluation of IEEE 802.11 WLAN using different PHY-Layer Standards,” Optik, Vol. 124, no. 4, pp. 357–360, Feb. 2013.
[3] Ç. Kurnaz, B. K. Engiz, and U. Köse, “Investigating the effect of number of users on signal strength level and throughput for Wi-Fi system,” in 2017 International Artificial Intelligence and Data Processing Symposium (IDAP), pp. 1–4, 2017.
[4] T. Skeie, S. Johannessen, and C. Brunner, “Ethernet in substation automation,” IEEE Control Systems Magazine, Vol. 22, no. 3, pp. 43–51, Jun. 2002.
[5] P. Parikh, “Investigation of Wireless LAN for IEC 61850 based Smart Distribution Substations,” Electronic Thesis and Dissertation Repository, Aug. 2012, [Online].
Available: https://ir.lib.uwo.ca/etd/869
[6] N. H. Ali, B. M. Ali, O. Basir, M. L. Othman, F. Hashim, and K. M. Abdel-Latif, “Protection of smart substation based on WLAN complies with IEC 61850 using traveling wave analysis,” Electric Power Systems Research, Vol. 140, pp. 20–26, Nov. 2016.
[7] N. H. Ali, B. M. Ali, O. Basir, L. Othman, and F. Hashim, “IEC 61850-based WLAN peer-to-peer feeder protection improvement in smart grid substation automation system,” Journal of Theoretical and Applied Information Technology Vol. 80, no. 3, pp. 510–520, 2015.
[8] Z. Zheng, L. Qiao, L. Wang, W. Cui, and J. Guo, “Discussion and Testing of 802.11ah Wireless Communication in Intelligent Substation,” in 2018 IEEE International Conference on Energy Internet (ICEI), pp. 208–212, 2018.
[9] Y. Ren, J. Cheng, and J. Chen, “Design of a Substation Secondary Equipment-Oriented Error Prevention System Using Wireless Communication Technology and Edge Node Cooperation,” Wireless Communications and Mobile Computing, vol. 2022, no. 6249549, 2022.
[10] A. Roy, J. Bera, and G. Sarkar, “Wireless sensing of substation parameters for remote monitoring and analysis,” Ain Shams Engineering Journal, vol. 6, no. 1, pp. 95–106, Mar. 2015.
[11] K., Neha. “Feasibility Study for Substation Communication using Parallel Redundant Wireless Technology.”, 2018. https://www.semanticscholar.org/paper/Feasibility-Study-for-Substation-Communication-Kumari/b9599de02cb641c0869eb52aae0886e1d1b33c7b (accessed Jul. 02, 2022).
[12] M. Khanafer, I. Al-Anbagi, and H. T. Mouftah, “An Optimized WSN Design for Latency-Critical Smart Grid Applications,” Journal of Sensors, vol. 2017, no. 5274715, Jul. 2017.
[13] J. Liu, Z. Zhao, J. Ji, and M. Hu, “Research and application of wireless sensor network technology in power transmission and distribution system,” Intelligent and Converged Networks, vol. 1, no. 2, p. 199, Sep. 2020.
[14] M. L. Laouira, A. Abdelli, J. B. Othman, and H. Kim, “An Efficient WSN Based Solution for Border Surveillance,” IEEE Transactions on Sustainable Computing, vol. 6, no. 01, pp. 54–65, Jan. 2021.
[15] P. P. Parikh, T. S. Sidhu, and A. Shami, “A Comprehensive Investigation of Wireless LAN for IEC 61850–Based Smart Distribution Substation Applications,” IEEE Transactions on Industrial Informatics, vol. 9, no. 3, pp. 1466–1476, Aug. 2013.
[16] Mohd. A. Aftab, S. M. S. Hussain, I. Ali, and T. S. Ustun, “IEC 61850 based substation automation system: A survey,” International Journal of Electrical Power & Energy Systems, vol. 120, p. 106008, Sep. 2020.
[17] Q. Ali and B. Shuker, “Enhancement of Industrial Ethernet and its Performance Analysis,” PhD Thesis, PhD Thesis, University of Mosul, 2006.
[18] I. Ali and M. S. Thomas, “Substation Communication Networks Architecture,” in 2008 Joint International Conference on Power System Technology and IEEE Power India Conference, Oct. 2008, pp. 1–8.
[19] L. Korowajczuk, LTE, WiMAX and WLAN network design, optimization and performance analysis. John Wiley & Sons, 2011.
[20] Q. I. Ali, “Performance Evaluation of WLAN Internet Sharing Using DCF & PCF Modes.,” Int. Arab. J. e Technol., vol. 1, no. 1, pp. 38–45, 2009.
[21] Q. Ali and E. Khuder, “Analysis of Industrial Networks Using Different Wlan Standards,” Information Engineering Science and Engineering Publishing Company, vol. 1, no. 1, pp. 8–13, 2012.
[22] Q. I. Ali, “An efficient simulation methodology of networked industrial devices,” in 2008 5th International Multi-Conference on Systems, Signals and Devices, pp. 1–6, 2008.
[23] N. H. Ali, B. Mohd Ali, O. Basir, M. L. Othman, and F. Hashim, “Second generation IEEE802.11N performance for IEC61850-based substation automation system,” Journal of Theoretical and Applied Information Technology, vol. 85, no. 2, Art. no. 2, Mar. 2016.
[24] NIST, “Communications Requirements of Smart Grid Technologies,” Energy.gov. https://www.energy.gov/gc/downloads/communications-requirements-smart-grid-technologies (accessed Apr. 05, 2021).
[25] K. M. Sydney, C. Du, and S. M. Ngwira, “The feasibility of a WLAN based power substation monitoring platform,” in 2016 International Conference on Advances in Computing and Communication Engineering (ICACCE), pp. 85–90, 2016. | ||
|
Statistics Article View: 575 PDF Download: 346 |
||