- All Journals
- Al-Qadisiyah University
- Basrah University
- Kirkuk University
- Mosul University
- The Iraqi Borad for Medical Specialization
- University of Anbar
- University of Technology
- Al Mustafa University
- Al-Zahraa University for Women
- Alnoor University
- Kunooz University
- Misan University
- Ninevah University
- Tikrit University
- University of Al-Hamdaniya
- University of Kerbala
A comparative study between two lubrication nano-additives (Bi2O3 & TiO2) based on vibration response analysis | ||
| Engineering and Technology Journal | ||
| Article 6, Volume 41, Issue 1, 2023, Pages 60-68 PDF (1.18 M) | ||
| Document Type: Review Paper | ||
| DOI: 10.30684/etj.2022.133013.1162 | ||
| Authors | ||
| Sarah S. Jaffar1; Wafa A. Soud* 2; Ihsan A. Baqer3 | ||
| 1Mechanical Engineering, UOT, Iraq | ||
| 2University of Technology-Iraq | ||
| 3Mechanical Engineering, UOT, Iraq, Baghdad | ||
| Abstract | ||
| The purpose of this paper is to present a vibration monitoring analysis of a hydrodynamic journal bearing working with nano-additives lubricants.The vibration response is generated on bearings at various rotational speeds and dynamic load conditions.These bearings were tested experimentally by adding two types of nano additives; Bismuth (3) oxide (Bi2O3), which is considered a green, nontoxic metal, as well as a new additive, and nano Titanium dioxide (TiO2), which is moderately toxic, with SN150 base oil.The performance of additives was studied on the base oil. The comparisons between the two nano-additives Bi2O3 with (1, 2, and 4 wt. %) and TiO2 with (1 and 1.25 wt. %) were studied experimentally with the SN150 base oil. And the obtained results manifested that at different concentrations of Bi2O3 and TiO2 in the SN150 base oil for each rotational speed and dynamic load, there was a reduction in the vibration system response, where Bi2O3 has a good performance at a wide range of rotational speed and dynamic load. At the same time, TiO2 performs better at higher rotational speed and dynamic load. | ||
Highlights | ||
| ||
| Keywords | ||
| Dynamic response; Lubricant, rotor; Journal bearing; Mineral oil; Bi2O3 Nanoparticles; TiO2 Nanoparticles | ||
| References | ||
|
[1] A. Singh, N. Verma, A. Chaurasia and A. Kumar, Effect of TiO2 additive volume fraction in lubricant oil on the performance of hydrodynamic journal bearing, in The Electrocamical Socity, 241st ECS Meeting, Vancouver . BC . Canada, (2020). doi: 10.1177/1350650119866028 [2] B. Bou-Saïd, H. Boucherit and M. Lahmar, On the influence of particle concentration in a lubricant and its rheological properties on the bearing behavior, Mechanics & Industry.,13(2012)111–121. [3] M. Y. A. Jamalabadi, Effects of Nanoparticle Enhanced Lubricant Films in Dynamic Properties of Plain Journal Bearings at High Reynolds Numbers, Eng. Technol. J., 13(2017) 1-23. doi: https://doi.org/10.18052/www.scipress.com/IJET.13.1 [4] B. A. Abass and Z. S. Hamzah, Effects of Lubricant Temperature on the Dynamic and Stability Behaviour of Nano-Lubricated Journal Bearing, The Iraqi Journal For Mechanical And Material Engineering., 19 (2019) 44-59. [5] A. Kornaev, L. Savin, E. Kornaeva and A. Fetisov, Influence of the ultrafine oil additives on friction and vibration in journal bearings, Tribology International., 101 (2016) 131-140. doi: https://doi.org/10.1016/j.triboint.2016.04.014 [6] B. K. G., Y. K., S. B. S., R. D. S. and P. R., Dynamic Performance Characteristics of Finite Journal Bearings Operating on TiO2 based Nanolubricants, Science & Technnology., 25 (2017) 963 - 976. [7] B. A. Abass and Amal K. A., Effect of nano-lubrication on the dynamic coefficients of worn journal bearing, Int. J. Energy Environ., 8 (2017) 557-566. [8] J. Q. Hu, J. Zhu, K. Y. Gao and Y. W. Fei, Study on Tribological Properties of Organic Bismuth Compounds as Lubricationg Additive, Advanced Materials Research., 233-235 (2011)1632-1635. [9] F. L. Borda, S. JoséRibeiro de Oliveira, L. M. Seabra, M. Lazaro and A. JoséKalab Leiróz, Experimental investigation of the tribological behavior of lubricants with additive containing copper nanoparticles, Tribology International., 117 (2018) 52-58. doi: https://doi.org/10.1016/j.triboint.2017.08.012 [10] J. Jung, Y. Park, S. Bin Lee, C.-H. Cho, K. Kim, E. J. Wiedenbrug and M. Teska, Monitoring Journal-Bearing Faults: Making Use of Motor Current Signature Analysis for Induction Motors, IEEE Industry Applications Magazine., 23 (2017) 12 - 21. doi: https://doi.org/10.1109/MIAS.2016.2600725 [11] D. Peng, Y. Kang, S. Chen, F. Shu and Y. Chang, Dispersion and tribological properties of liquid paraffin with added aluminum nanoparticles, Industrial Lubrication and Tribology., 62(2010). [12] P. Shuk, H.-D. Wiemhöfer, U. Guth, W. Göpel and M. Greenblatt, Oxide ion conducting solid electrolytes based on Bi2O3, Solid State Ionics., 89 (1996) 179-196. [13] W. K. Shafi, A. Raina, and M. I. Ul Haq, Friction and wear characteristics of vegetable oils using nanoparticles for sustainable lubrication, Tribology-Materials, Surfaces & Interfaces., 12 (2018) 27-43. [14] K. Binu, B. Shenoy, D. Rao, and R. Pai, A variable viscosity approach for the evaluation of load carrying capacity of oil lubricated journal bearing with TiO2 nanoparticles as lubricant additives, Procedia materials science., 6 (2014) 1051-1067. doi: 10.1016/j.mspro.2014.07.176 [15] H. Chang, C.-H. Chen, and H.-S. Tu, The fabrication and effect of Bi and Bi/Cu nanoparticles on the tribological properties of SAE-30 lubricating oil, J. Comput. Theor. Nanosci., 12 (2015) 852-857. doi: 10.1166/jctn.2015.3816 [16] M. Akbulut, N. Belman, Y. Golan and J. Israelachvili Frictional Properties of Confined Nanorods. Advanced Materials., 18 (2006) 2589-2592. doi: https://doi.org/10.1002/adma.200600794 [17] C. Müller, F. L. Redondo, M. Dennehy, A. E. Ciolino and W.R. Tuckart, Bismuth (3) sulfide as additive: towards better lubricity without toxicity. Industrial Lubrication and Tribology., 70 (2018) 347-352. doi: https://doi.org/10.1108/ILT-03-2017-0051 | ||
|
Statistics Article View: 790 PDF Download: 406 |
||