- All Journals
- Al-Qadisiyah University
- Basrah University
- Kirkuk University
- Mosul University
- The Iraqi Borad for Medical Specialization
- University of Anbar
- University of Technology
- Al Mustafa University
- Al-Zahraa University for Women
- Alnoor University
- Kunooz University
- Misan University
- Ninevah University
- Tikrit University
- University of Al-Hamdaniya
- University of Kerbala
Thermal Analysis of Switched Reluctance Motor Based on RMXprt/Motor-CAD | ||
| Anbar Journal of Engineering Sciences | ||
| Article 2, Volume 14, Issue 1, 2023, Pages 7-14 PDF (1.81 M) | ||
| Document Type: Research Paper | ||
| DOI: 10.37649/aengs.2023.137844.1036 | ||
| Authors | ||
| Hussein bardan* ; Amer Mejbel Ali | ||
| Electrical Engineering Department, College of Engineering, Mustansiriyah University, Baghdad, Iraq | ||
| Abstract | ||
| Switched reluctance motor (SRM) is an electric motor works based on the reluctance torque produced due to the variation of the rotor pole position with respect to stator poles. This paper adopts a thermal analysis on a 4-phase, 8/6 pole, 550W, SRM. Lumped parameters thermal network method(LPTN) is used in this analysis based on a combination of RMXprt/Motor-CAD software, in two- dimensional(2D), steady-state, with different cooling methods, and with different loading conditions. Motor losses like core losses, copper losses, and mechanical losses are regarded as the heat sources in SRM which are calculated by RMXprt software. The thermal analysis achieved by Motor-CAD includes displaying the temperature distribution on different motor parts like stator winding, stator poles, stator yoke, rotor poles, rotor yoke, shaft, covers, and housing. The analysis results showed the increasing temperature distribution on different motor parts with increasing motor loading conditions. Also, this temperature distribution is recorded using three different cooling methods. The comprehensive thermal analysis applied in this work will assist the motor designer in choosing a better motor thermal design without needing to produce and test costly prototype motors. | ||
| Keywords | ||
| Thermal; LPTN; SRM | ||
| References | ||
|
[1] B. Biligin, J. W. Jiang, and A. Emadi, “Switched reluctance motor drives: fundamentals to applications,” Boca Raton, FL, CRC Press, 2018.
[2] R. Krishnan, “Switched reluctance motor drives: modeling, simulation, analysis, design, and applications,” Boca Raton, CRC Press, 2017.
[3] X. Sun, B. Wan, G. Lei, X.Tian, Y. Guo, & J. Zhu, “Multiobjective and multiphysics design optimization of a switched reluctance motor for electric vehicle applications,” IEEE Transactions on Energy Conversion., vol. 36, pp. 3294–3304, Dec. 2021, doi: 10.1109/TEC.2021.3078547
[4] Y.Sun, B.Zhang, Y.Yuan, and F.Yang, “Thermal characteristics of switched reluctance motor under different working conditions,” Progress In Electromagnetics Research M, vol. 74, pp. 1123, Oct. 2018,doi:10.2528/PIERM18071301
[5] K.Bieńkowski, M. Szulborski, S.Łapczyński, Ł.Kolimas, and H.Cichecki, “Parameterized 2D Field Model of a Switched Reluctance Motor,” Electricity, vol. 2, pp. 590–613, Dec. 2021, doi. org/10.3390/electricity2040034.
[6] J. H. Jang, H. C. C hiu, W. M. Yan, M. C. Tsai, and P. Y. Wang, “Numerical study on electromagnetics and thermal cooling of a switched reluctance motor,” Case Studies in Thermal Engineering., vol. 6, pp. 16–27, Sep.2015,doi.org/10.1016/j.csite.2015.05.001
[7] H. C. Chiu, J. H. Jang, W. M. Yan, and R. B. Shiao, “Thermal performance analysis of a 30 kW switched reluctance motor,” International Journal of Heat and Mass Transfer., vol. 114, pp. 145–154. Nov. 2017, doi.org/10.1016/j.ijheatmasstransfer.2017.06.057
[8] H. Chen, W. Yan, and C. C. Chan, “Iron loss and temperature field analysis of four-phase 8/6 structure switched reluctance motor for electric vehicles,” in 2019 IEEE Vehicle Power and Propulsion Conference (VPPC), Oct. 2019, pp. 1–4, doi: 10.1109/VPPC46532.2019.8952232
[9] M. Kasprzak, J. W. Jiang, B. Bilgin, and A. Emadi, “Thermal analysis of a three-phase 24/16 switched reluctance machine used in HEVs,” in 2016 IEEE Energy Conversion Congress and Exposition (ECCE), Sep. 2016, pp. 1–7, doi: 10.1109/ECCE.2016.7855510
[10] P. S. Nasab, M. Moallem, E. S. Chaharsoghi, C.Caicedo-Narvaez, and B. Fahimi,., “Predicting temperature profile on the surface of a switched reluctance motor using a fast and accurate magneto-thermal model,” IEEE Transactions on Energy Conversion., vol. 35, pp. 1394–1401, Sep. 2020, doi: 10.1109/TEC.2020.2974789
[11] J. L. Huang, Y.Xuan, L. Zhang, and T. G. Liu, “Analysis on the design and temperature field of switched reluctance motor for electric vehicle,” in Journal of Physics: Conference Series, vol. 1777, p. 12001, Feb. 2021, doi 10.1088/1742-6596/1777/1/012001.
[12] E. Elhomdy, Z. Liu, and G. Li, “Thermal and mechanical analysis of a 72/48 switched reluctance motor for low-speed direct-drive mining applications,” Applied Sciences., vol. 9, p. 2722, Jul. 2019, doi.org/10.3390/app9132722.
[13] E. C. Abunike, O. I. Okoro, and I. E. Davidson, “Thermal Analysis of an Optimized Switched Reluctance Motor for Enhanced Performance,” in 2021 IEEE PES/IAS PowerAfrica, pp. 1–5, Aug 2021, doi: 10.1109/PowerAfrica52236.2021.9543275
[14] R. R. Reis, M. L. Kimpara, J. O. Pinto, and B. Fahimi, “Multi-physics simulation oF 6/4 switched reluctance motor by finite element method,”. Eletrôn. Potên., Fortaleza , v. 26, p. 8-18 Jun 2020, doi.org/10.18618/REP.2021.1.0004.
[15] A. Pavan, N. Sathyanarayanan, R. Kumar, N. C. Lenin, and R. Sivakumar, “Thermal Investigation of a Switched Reluctance Motor,” International Journal of Electrical Engineering., vol. 8, no. 2, pp. 115–121,2015
[16] K. Vijayakumar, A. J. Basanth, R. Karthikeyan, V.Sivakumar, N. Balamurugan, and C. S. Sundaram, “Influence of iron powder core on the switched reluctance motor performance enhancement,” Materials Today: Proceedings, vol. 33, pp. 2255–2263, 2020, doi.org/10.1016/j.matpr.2020.04.082
[17] N. Arbab, W. Wang, C. Lin, J. Hearron, and B. Fahimi, “Thermal modeling and analysis of a double-stator switched reluctance motor,” IEEE Transactions on Energy Conversion., vol. 30, pp. 1209–1217, Sep 2015, doi: 10.1109/TEC.2015.2424400
[18] M. S. Rahman, G. F. Lukman, P. T. Hieu, K. I. Jeong, and J. W. Ahn, “Optimization and Characteristics Analysis of High Torque Density 12/8 Switched Reluctance Motor Using Metaheuristic Gray Wolf Optimization Algorithm,” Energies, vol. 14, no. 7, p. 2013. Apr. 2021, doi.org/10.3390/en14072013.
[19] Y. Zhu, “The Key Technologies for Powertrain System of Intelligent Vehicles Based on Switched Reluctance Motors,” Springer. 2022. Doi.org/10.1007/978-981-16-4851-9.
[20] S. Allirani, H. Vidhya, T. Aishwarya, T. Kiruthika, and V. Kowsalya, “Design and performance analysis of switched reluctance motor using ANSYS Maxwell,” in 2018 2nd International Conference on Trends in Electronics and Informatics (ICOEI), May. 2018, pp. 1427–1432. DOI: 10.1109/ICOEI.2018.8553912.
[21] B.Gecer, and N. F. O.,Serteller, “Understanding Switched Reluctance Motor Analysis using ANSYS/Maxwell,” IEEE International Symposium on Industrial Electronics, Jun. 2020, pp. 446–449. doi: 10.1109/ISIE45063.2020.9152513. | ||
|
Statistics Article View: 2,134 PDF Download: 286 |
||