- All Journals
- Al-Qadisiyah University
- Basrah University
- Kirkuk University
- Mosul University
- The Iraqi Borad for Medical Specialization
- University of Anbar
- University of Technology
- Al Mustafa University
- Al-Zahraa University for Women
- Alnoor University
- Kunooz University
- Misan University
- Ninevah University
- Tikrit University
- University of Al-Hamdaniya
- University of Kerbala
The Effect of Reactive Power Capability of the Inverter on a Hybrid Power System | ||
| Al-Rafidain Engineering Journal (AREJ) | ||
| Article 18, Volume 28, Issue 1, 2023, Pages 193-206 PDF (1.35 M) | ||
| Document Type: Research Paper | ||
| DOI: 10.33899/rengj.2022.136386.1206 | ||
| Authors | ||
| Raghad Adeeb Othman* ; Omar Sharaf Al-Deen Al-Yozbaky | ||
| Electrical Engineering Department, Collage of Engineering, University of Mosul, Mosul, Iraq | ||
| Abstract | ||
| Rising electricity consumption, rapid depletion of fossil fuels, and the global shift to the use of renewable energy resources have increased the need to integrate renewable and distributed energy resources (DERs), such as solar photovoltaic (PV) to power distribution networks. In this paper, the effect of photovoltaic system inverter scalability on reactive power compensation/absorption in a modified IEEE 13-node distribution network is studied. Power flow analyzes were conducted in MATLAB / SIMULINK software for different operating conditions to show the effect of reactive power on network voltage regulation, total harmonic distortion (THD) reduction, and power factor conservation in order to improve the system's power handling capacity. The result shows that the use of the PV system (500 kW) in Bus (671) led to a decrease in the generated power of the generator by 13.79%, the use of reactive power injection from the inverter of the photovoltaic system on site improved the voltage profile significantly. Also, the voltage distortion (THD-V) was reduced by 34% when injected with reactive power, and the current distortion (THD-I) was reduced by 57.65% when the reactive power was absorbed, and the power factor was improved on site. | ||
| Keywords | ||
| Reactive Power Capability; Hybrid Systems; Power Quality; photovoltaic system; voltage Support | ||
| References | ||
|
[1] R. H. A. Zubo, G. Mokryani, H. S. Rajamani, J. Aghaei, T. Niknam, and P. Pillai, “Operation and planning of distribution networks with integration of renewable distributed generators considering uncertainties: A review,” Renew. Sustain. Energy Rev., vol. 72, pp. 1177–1198, 2017, doi: 10.1016/j.rser.2016.10.036.
[2] J. P. Ram, H. Manghani, D. S. Pillai, T. S. Babu, M. Miyatake, and N. Rajasekar, “Analysis on solar PV emulators: A review,” Renew. Sustain. Energy Rev., vol. 81, pp. 149–160, 2018, doi: 10.1016/j.rser.2017.07.039.
[3] M. Amoozadeh and S. A. Gholamian, “Active and Reactive Power Control of Photovoltaic Systems Connected to the Network for Maximum Power Point Tracking,” Int. J. Mechatronics, Electr. Comput. Technol., vol. 4, no. 12, pp. 857–885, 2014.
[4] International Renewable Energy Agency, “Renewable Capacity Highlights,” 2021.
[5] R. Tonkoski and L. A. C. Lopes, “Voltage regulation in radial distribution feeders with high penetration of photovoltaic,” in 2008 IEEE Energy 2030 Conference, 2008, pp. 1–7.
[6] M. L. Kolhe and M. J. M. A. Rasul, “3-Phase grid-connected building integrated photovoltaic system with reactive power control capability,” Renew. Energy, vol. 154, pp. 1065–1075, 2020, doi: 10.1016/j.renene.2020.03.075.
[7] P. Jahangiri and D. C. Aliprantis, “Distributed Volt/VAr control by PV inverters,” IEEE Trans. Power Syst., vol. 28, no. 3, pp. 3429–3439, 2013, doi: 10.1109/TPWRS.2013.2256375.
[8] R. Geetha and V. Jayachitra, “Simplified Reactive Power Control for grid-connected Photovoltaic inverters,” Indian J. Sci. Technol., vol. 8, no. 13, 2015, doi: 10.17485/ijst/2015/v8i13/57487.
[9] H. Li, C. Wen, K. H. Chao, and L. L. Li, “Research on inverter integrated reactive power control strategy in the grid-connected PV systems,” Energies, vol. 10, no. 7, 2017, doi: 10.3390/en10070912.
[10] S. Vlahinić, D. Franković, V. Komen, and A. Antonić, “Reactive power compensation with PV inverters for system loss reduction,” Energies, vol. 12, no. 21, pp. 1–17, 2019, doi: 10.3390/en12214062.
[11] M. Burlacu, V. Năvrăpescu, A. I. Chirilă, and I. D. Deaconu, “Optimal Reactive Power Management for Microgrids Based on Photovoltaic Inverters Using Sine-Cosine Algorithm,” Rev. Roum. des Sci. Tech. Ser. Electrotech. Energ., vol. 67, no. 2, pp. 117–122, 2022.
[12] V. Kumar and M. Singh, “Reactive power compensation using derated power generation mode of modified P&O algorithm in grid-interfaced PV system,” Renew. Energy, vol. 178, pp. 108–117, 2021, doi: 10.1016/j.renene.2021.06.035.
[13] W. H. Kerting, “Radial distribution test feeders IEEE distribution planning working group report,” IEEE Trans. Power Syst., vol. 6, no. 3, pp. 975–985, 1991, doi: 10.1109/59.119237.
[14] S. A. Mohamed and M. Abd El Sattar, “A comparative study of P&O and INC maximum power point tracking techniques for grid-connected PV systems,” SN Applied Sciences, vol. 1, no. 2. 2019, doi: 10.1007/s42452-018-0134-4.
[15] I. V. Banu, R. Beniuga, and M. Istrate, “Comparative analysis of the perturb-and-observe and incremental conductance MPPT methods,” in 2013 8Th International Symposium on advanced topics in electrical engineering (ATEE), 2013, pp. 1–4. , doi: 10.1109/ATEE.2013.6563483.
[16] M. Hlaili and H. Mechergui, “Comparison of Different MPPT Algorithms with a Proposed One Using a Power Estimator for Grid Connected PV Systems,” Int. J. Photoenergy, vol. 2016, 2016, doi: 10.1155/2016/1728398.
[17] M. A. Elgendy, B. Zahawi, and D. J. Atkinson, “Evaluation of perturb and observe MPPT algorithm implementation techniques,” in 6th IET International Conference on Power Electronics, Machines and Drives (PEMD 2012), 2012, pp. 1–6. doi: 10.1049/cp.2012.0156.
[18] M. A. Sahnoun, H. M. R. Ugalde, J. C. Carmona, and J. Gomand, “Maximum power point tracking using P&O control optimized by a neural network approach: A good compromise between accuracy and complexity,” Energy Procedia, vol. 42, pp. 650–659, 2013, doi: 10.1016/j.egypro.2013.11.067.
[19] A. Saidi, “Comparison of IC and P & O algorith algorithms ms in MPPT for grid connected PV module,” in 8th Int. Conf. Model. Identif. Control, pp. 213–218, 2016.
[20] G. R. Patel, D. B. Patel, and K. M. Paghdal, “Analysis of P & O Mppt Algorithm for Pv System I . Introduction Ii . Basic Principle of Mppt Iii . System Configuration,” Int. J. Electr. Electron. Eng., vol. 5, no. 6, pp. 1–10, 2016.
[21] Z. Yi, W. Dong, and A. H. Etemadi, “A Centralized Power Control and Management Method for Grid-Connected Photovoltaic (PV)-Battery Systems,” September, 2017, [Online]. Available: http://arxiv.org/abs/1709.09219.
[22] E. D. Kostopoulos, G. C. Spyropoulos, and J. K. Kaldellis, “Real-world study for the optimal charging of electric vehicles,” Energy Reports, vol. 6, pp. 418–426, 2020, doi: 10.1016/j.egyr.2019.12.008. | ||
|
Statistics Article View: 475 PDF Download: 306 |
||