- All Journals
- Al-Qadisiyah University
- Basrah University
- Kirkuk University
- Mosul University
- The Iraqi Borad for Medical Specialization
- University of Anbar
- University of Technology
- Al Mustafa University
- Al-Zahraa University for Women
- Alnoor University
- Kunooz University
- Misan University
- Ninevah University
- Tikrit University
- University of Al-Hamdaniya
- University of Kerbala
Experimental and simulation investigation of porous Functionally Graded beam under bending loading | ||
| Anbar Journal of Engineering Sciences | ||
| Volume 14, Issue 1, 2023, Pages 98-107 PDF (2.7 M) | ||
| Document Type: Review Paper | ||
| DOI: 10.37649/aengs.2023.139492.1050 | ||
| Authors | ||
| Muthanna Ismaeel Fayyadh* 1; Arz Qwam Alden2 | ||
| 1Department of Mechanical Engineering , College of Engineering, University of Anbar, Al-Anbar, Iraq | ||
| 2Mechanical Department, Engineering College, University of Anbar, Ramadi, Al-Anbar, Iraq | ||
| Abstract | ||
| In recent decades, functionally graded porous structures have been utilized due to their light weight and excellent energy absorption. They have various applications in the aerospace, biomedical, and engineering fields. Therefore, the balance between material strength and light weight is the goal of the researchers to decrease the cost. Samples of PLA material were designed and manufactured using a 3D printer according to international standard specifications to study the effect of porosity gradient through thickness. An experimental three-point bending test was performed, and then simulations were performed using ANSYS 2022 R1 software on samples with functionally gradient different porosity layers to verify the experimental results. The results from the experiment and the numerical values were in excellent alignment with an error rate of no more than 13%. The maximum bending load and maximum deflection of the beam were specified experimentally and compared with the numerical solution. The maximum bending and the maximum deflection When the porosity layer in the middle of the beam, matched the ideal maximum bending load (190,194) N experimentally and numerically, respectively. The maximum deflection (5.9,6.4) mm experimentally and numerically, respectively was obtained in samples with varying porous layers. | ||
| Keywords | ||
| Bending; Numerical Simulations; Porosity; Functionally Graded Materials; Deflection | ||
| References | ||
|
[1] Awan U, Shamim S, Khan Z, Zia NU, Shariq SM, Khan MN. Big data analytics capability and decision-making: The role of data-driven insight on circular economy performance. Technological Forecasting and Social Change 2021;168:120766.
[2] Gladysz GM, Chawla KK. Voids in materials: from unavoidable defects to designed cellular materials: Elsevier, 2020.
[3] Njim EK, Bakhi SH, Al-Waily M. Experimental and numerical flexural properties of sandwich structure with functionally graded porous materials. Engineering and Technology Journal 2022;40(01):137-147.
[4] Njim E, Bakhy S, Al-Waily M. Analytical and numerical free vibration analysis of porous functionally graded materials (FGPMs) sandwich plate using Rayleigh-Ritz method. Archives of Materials Science and Engineering 2021;110(1):27-41.
[5] Vaka V, Sathujoda P, Yelike S. A review on dynamic analysis of porous functionally graded rotor systems. AIP Conference Proceedings: AIP Publishing LLC; 2021:020010.
[6] Khan T, Zhang N, Akram A. State of the art review of functionally graded materials. 2019 2nd International Conference on Computing, Mathematics and Engineering Technologies (iCoMET): IEEE; 2019:1-9.
[7] Mota A, Loja M. Mechanical behavior of porous functionally graded nanocomposite materials. C 2019;5(2):34.
[8] Saleh B, Jiang J, Fathi R, et al. 30 Years of functionally graded materials: An overview of manufacturing methods, Applications and Future Challenges. Composites Part B: Engineering 2020;201:108376.
[9] Lee K-J, Lee J-H, Jung C-Y, Choi E. Crack-closing performance of NiTi and NiTiNb fibers in cement mortar beams using shape memory effects. Composite Structures 2018;202:710-718.
[10] Mandal T, Tinjum JM, Gokce A, Edil TB. Protocol for testing flexural strength, flexural modulus, and fatigue failure of cementitiously stabilized materials using third-point flexural beam tests: ASTM International, 2015.
[11] Data AGM. Ansys Granta Materials Data | Unrivalled Materials Data Library. (https://forum.ansys.com/forums/topic/what-is-the-source-of-mesh-quality-spectrum/).
[12] Forum AL. Ansys Innovation Space. (n.d.). 2022 (https://forum.ansys.com/forums/topic/what-is-the-source-of-mesh-quality-spectrum).
[13] ASTM S. Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials. ASTM D790. Annual book of ASTM standards 1997.
[14] Loh, G.H., et al., An overview of functionally graded additive manufacturing. Additive Manufacturing, 2018. 23: p. 34-44. | ||
|
Statistics Article View: 2,144 PDF Download: 582 |
||