Effect of Environmental Conditions and Additive Clay-Particles on Properties of Epoxy–Clay Nanocomposites: A Review

[1]. Azeez AA, Rhee KY, Park SJ, Hui D (2013) Epoxy clay nanocomposites—processing, properties and applications: a review. Compos Part B 45(1):308–320

[2] Jumahat A, Soutis C, Abdullah SA, Kasolang S (2012) Tensile properties of nanosilica/epoxy nanocomposites. Procedia Eng 41:1634–1640

[3] Yasmin A, Luo JJ, Abot JL, Daniel IM (2006) Mechanical and thermal behavior of clay/epoxy nanocomposites. Compos Sci Technol 66(14):2415–2422

[4] LeBaron PC, Wang Z, Pinnavaia TJ. (1999) Polymer-layered silicate nanocomposites: an overview. Appl Clay Sci; 15:11–29.

[5] Powell CE, Beall GW. (2006) Physical properties of polymer/clay nanocomposites. Curr Opin Solid State Mater Sci; 10:73–80.

[6] Jordan J, Jacob K, Tannenbaum R, Sharaf M, Jasiuk I. (2005) Experimental trends in polymer nanocomposites-a review. Mat Sci Eng A; 393:1–11.

[7] G. Choudalakis, A.D. Gotsis, (2009) Permeability of polymer/clay nanocomposites: A review, European Polymer Journal 45 967–984

[8] M. Al-Qadhi, N. Merah, Z.M. Gasem, N. Abu-Dheir, B.J. Abdul Aleem, (2014) Effect of Water and Crude Oil on Mechanical and Thermal Properties of Epoxy-Clay Nanocomposites, Polymer Composites, 3018- 326

[9] Ke YC, Stroeve P. (2005) Polymer-layered silicate and silica nanocomposites Netherlands: Elsevier Inc.

[10] Theng BKG. (1979) Formation and properties of clay-polymer complexes. Amsterdam: Elsevier Scientific publishing company.

[11] Asif Abdul Azeez, Kyong Yop Rhee, Soo Jin Park, David Hui, (2013) Epoxy clay nanocomposites – processing, properties and applications: A review, Composites: Part B 45 308–320

[12] Ray SS, Okamoto M. (2003) Polymer/layered silicate nanocomposites: a review from preparation to processing. Prog Polym Sci; 28:1539.

[13] Zeng QH, Yu AB, Lu GQ, Paul DR. (2005) Clay-based polymer nanocomposites:research and commercial development. J Nanosci Nanotechnol; 5:1574.

[14] LeBaron PC, Wang Z, Pinnavaia JT. (1999) Polymer-layered silicate nanocomposites:on overview. Appl Clay Sci; 15:11.

[15] Alexandre M, Dubois P. (2000) Polymer-layered silicate nanocomposites:preparation, properties and uses of a new class of materials. Mater Sci Eng R; 28:1–63.

[16] Pinnavaia TJ, Beall GW. (2001) Polymer clay nanocomposites. John Wiley &Sons, Inc.

.[17] Pavlidou S, Papaspyrides CD. (2008) A review on polymer-layered silicate nanocomposites. Prog Polym Sci; 33:1119–98.

[18] Ke YC, Stroeve P. (2005) Polymer-layered silicate and silica nanocomposites. Netherlands: Elsevier Inc.

[19]  Theng BKG. (1979) Formation and properties of clay-polymer complexes . Amsterdam: Elsevier Scientific publishing company.

[20] Manias E, Touny A, Wu L, Strawhecker K, Lu B, Chung TC. (2001) Polypropylene/montmorillonite nanocomposites – review of the synthetic routes and materials properties. Chem Mater; 13:3516–23.

[21] Zanetti M, Lomakin S, Camino G. (2000) Polymer layered silicate nanocomposites. Macromol Mater Eng; 279:1–9.

[22] Kazuhisa Yano, Arlmltsu Usuki, Akane Okada, Toshio Kurauchi, And Osami Kamlgalto, (1993) Synthesis and Properties of Polyimide-Clay Hybrid, Journal of Polymer Science: Part A Polymer Chemistry, Vol. 31,2493-2498.

[23] Ray SS, Okamoto M. (2003) Polymer/layered silicate nanocomposites: a review from preparation to processing. Prog Polym Sci; 28: 1539–641.

[24] M. Alexandre, P. Dubois, (2000) Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials, Materials Science and Engineering 28 1-63

[25] Azeez AA, Rhee KY, Park SJ, Hui D (2013) Epoxy clay nanocomposites—processing, properties and applications: a review. Compos Part B: Eng 45(1):308–320

[26] Barick AK, Tripathy DK (2011) Effect of organically modified layered silicate nanoclay on the dynamic viscoelastic properties of thermoplastic polyurethane nanocomposites. Appl Clay Sci 52(3):312–321

[27] V. C. Shunmugasamy, C. Xiang and N. Gupta, (2015) Clay/Polymer Nanocomposites:Processing, Properties, and Applications, Chapter 5, Springer International Publishing Switzerland.

[28] H. Salam, Y. Dong, I. Davies, (2015) Development of biobased polymer/clay nanocomposites:a critical review, Fillers and Reinforcements for Advanced Nanocomposites., http://dx.doi.org/10.1016/B978-0-08-100079-3.00006-5,

[29] Reddy, M.M., Vivekanandhan, S., Misra, M., Bhatia, S.K., Mohanty, A.K., (2013). Biobasedplastics and bionanocomposites: current status and future opportunities. Progress inPolymer Science 38, 1653e1689.

[30] Wypych, F., Satyanarayana, K.G., (2005) Functionalization of single layers and nanofibers: a new strategy to produce polymer nanocomposites with optimized properties. Journal of Colloid and Interface Science 285, 532e543.

[31] Wang, R., Schuman, T., Vuppalapati, R.R., Chandradhekhara, K., (2014) Fabrication of biobased epoxy-clay nanocomposites. Green Chemistry 16, 1871e1882.

[32] Haq, M., Burgue~no, R., Mohanty, A.K., Misra, M., (2009b) Processing techniques for bio-based unsaturated-polyester/clay nanocomposites: tensile properties, efficiency, and limits. Composites Part A: Applied Science and Manufacturing 40, 394e403.

[33] Donescu, D., Ianchis, R., Petcu, C., Purcar, V., Nistor, C.L., Radovici, C., Somoghi, R.,Pop, S.F., Perichaud, A., (2013) Study of the solvents influence on the layered silicatescation polymer hybrids properties. Digest Journal of Nanomaterials and Biostructures 8,

1751e1759.

[34] Vaia RA, Giannelis EP (1997) Lattice model of polymer melt intercalation in organically modified layered silicates. Macromolecules 30(25):7990–7999

[35] Sinha Ray S, Okamoto M (2003) Polymer/layered silicate nanocomposites: a review from preparation to processing. Prog Polym Sci 28(11):1539–1641

[36] Sinha Ray, S., Bousmina, M., (2005) Biodegradable polymers and their layered silicate nanocomposites: in greening the 21st century materials world. Progress in Materials Science 50, 962e1079.

[37] Yasmin A, Luo JJ, Abot JL, Daniel IM (2006) Mechanical and thermal behavior of clay/epoxynanocomposites. Compos Sci Technol 66(14):2415–2422

[38] Wang K, Wang L, Wu J, Chen L, He C (2005b) Preparation of highly exfoliated epoxy/clay nanocomposites by “slurry compounding”: process and mechanisms. Langmuir 21(8):3613–3618

[39] Silan, M, Ziaei-Rad S, Esfahanian M, Tan VBC (2012) On the experimental and numerical investigation of clay/epoxy nanocomposites. Compos Struct 94(11):3142–3148

[40] Raman P. Singh, Mikhail Khait, Suraj C. Zunjarrao, Chad S. Korach, and Gajendra Pandey, (2010) Environmental Degradation and Durability of Epoxy-Clay Nanocomposites, Journal of Nanomaterials, Volume 2010, Article ID 352746, 13, doi:10.1155/2010/352746

[41] B. Ry´znarova´, J. Zelenka, F. Lednicky, J. Baldrian, (2008) Epoxy-Clay Nanocomposites: Influence of the Clay Surface Modification on Structure, Journal of Applied Polymer Science, Vol. 109, 1492–1497.

[42] M. G. LU, M. J. SHIM, S. W. KIM, (2001) Effects of Moisture on Properties of Epoxy Molding Compounds, Journal of Applied Polymer Science, Vol. 81, 2253–2259.

[43] F. Al-Sulaiman, Z. Khan, N. Merah, M.A. Kounain and M. Mehdi, (2010) Effects of weathering on failure pressure of filament-wound GFRP thermoset pipes, Journal of Composite Materials 45(6) 645–655. DOI: 10.1177/0021998310377933.

[44] N Merah, S Nizamuddin, Z Khan, F Al-Sulaimanand M Mehdi, (2010) Effects of harsh weather and seawater on glass fiber reinforced epoxy composite, Journal of Reinforced Plastics and Composites 29(20) 3104–3110, DOI: 10.1177/0731684410366172

[45] Christopher L. Soles, Albert F. Yee, (2000) A Discussion of the Molecular Mechanisms of Moisture Transport in Epoxy Resins, Journal of Polymer Science: Part B: Polymer Physics, Vol. 38, 792–802.

[46] H. Alamri, I.M. Low, (2012) Effect of water absorption on the mechanical properties of nano-filler reinforced epoxy nanocomposites, Materials and Design 42 214–222.

[47] Weiping Liu, Suong V. Hoa, Martin Pugh, (2005) Fracture toughness and water uptake of high-performance epoxy/nanoclay nanocomposites, Composites Science and Technology 65 2364–2373.

[48] Z. M. Gasem, N. Merah, M. Adinoyi and Z. Khan, (2012) The Effects of Clay Content and Sonication Time on Water Uptake in Epoxy-Organoclay Nanocomposites, Advanced Materials Research, , DOI: 10.4028/scientific5/AMR.445.509

[49] T. Glaskova, A. Aniskevich, (2009) Moisture absorption by epoxy/montmorillonite nanocomposite, Composites Science and Technology 69 2711–2715.

[50] Oshitsucu Kojima, Arlmltsu Usuki, Masaya Kawasumi, Akane Okada,Toshio Kurauchi, And Osamf Kamlgalto, (1993) Sorption of Water in Nylon 6-Clay Hybrid, Journal of Applied Polymer Science, Vol. 49, 1259-1264.

[51] Phillip B. Messersmith and Emmanuel P. Giannelis, (1995) Synthesis and Barrier Properties of Poly(e-Capro1actone)-Layered Silicate Nanocomposites, Journal of Polymer Science: Part A: Polymer Chemistry, Vol. 33,1047-1057.

[52] L.B. Manfredi, H. De Santis, A. Vázquez, (2008) Influence of the addition of montmorillonite to the matrix of unidirectional glass fibre/epoxy composites on their mechanical and water absorption properties, Composites: Part A 39 1726–1731.

[53] Ole Becker, Russell J. Varley, George P. Simon, (2004) Thermal stability and water uptake of high-performance epoxy layered silicate nanocomposites, European Polymer Journal 40 187–195.

[54] X. Kornmann , M. Rees a, Y. Thomann , A. Necola , M. Barbezat , R. Thomann, (2005) Epoxy-layered silicate nanocomposites as matrix in glass fibre-reinforced composites, Composites Science and Technology 65  2259–2268.

[55] Jang-Kyo Kim, Chugang Hu, Ricky S.C. Woo, Man-Lung Sham, (2005) Moisture barrier characteristics of organoclay–epoxy nanocomposites, Composites Science and Technology 65 805–813.

[56] T.P. Mohan, K. Kanny, (2011) Water barrier properties of nanoclay filled sisal fibre reinforced epoxy composites, Composites: Part A 42 385–393.

[57] C. Karika Chozhan, A. Chandramohan and M. Alagar, (2018) Surface modified clay reinforcedsilicon incorporated epoxy hybrid nanocomposites: Thermal, mechanical, and morphological properties, Polymers from Renewable Resources, Vol. 9, No. 1,.

[58] Chinnakkannu Karikal Chozhan, Muthukaruppan Alagar, Rajkumar Josephine Sharmila, Periyannan Gnanasundaram, (2007) Thermo-mechanical behaviour of unsaturated polyester toughened epoxy–clay hybrid nanocomposites, J Polym Res 14:319–328, DOI 10.1007/s10965-007-9114-x

[59] J.K. Kim, C. Hu, R.S.C. Woo, and M.L. Sham, (2005) Moisture barrier characteristics of organoclay–epoxy nanocomposites, Compos.Sci. Technol., 65, 805

[60] W. Liu, S.V. Hoa, and M. Pugh, (2008) Water uptake of epoxy–clay nanocomposites: Experiments and model validation, Compos. Sci. Technol., 68, 2066.

[61] H.G. Carter and K.G. Kibler, J., (1978) Langmuir-type model for anomalous moisture diffusion in composite resins, Compos. Mater., 12, 118.

[62] J. Crank, (1956) The Mathematics of Diffusion, Clarendon, Oxford.

[63] M. Al-Qadhi, N. Merah, Z. M. Gasem, (2013) Mechanical properties and water uptake of epoxy–claynanocomposites containing different clay loadings, J. Mater. Sci.,48, 3798.

[64] T.Z. Fu, L. Yu, Z. Wang, W. Yu, C. Zhao, S. Zhong, J.Cui, K. Shao, and H. Na Polym., (2009) Epoxy Resin/Exfoliated Clay Hybrid Materials With High Thermal Properties, Compos., 20, 948.

[65] M.G. Lu, M.J. Shim, and S.W. Kim, (2001) Effects of moisture on properties of epoxy molding compounds, J. Appl. Polym. Sci., 81, 2253.

[66] Wu CS, Liu YL and Chiu YS. (2002) Epoxy resins possessing flame retardant elements from silicon incorporated epoxy compounds cured with phosphorus or nitrogen containing curing agents. Polymer; 43, 4277–4284.

[67] T. Glaskova, A. Aniskevich, (2009) Creep Behaviour Of Epoxy/Clay Nanocomposite, Proceedings of international conference on composite materials,

[68] Liu, W., Hoa, S., Pugh, M. (2005) Organoclay-modified high performance epoxy nanocomposites. Composites Science and Technology, , N 62, N 2, p. 307-316.

[69] Jordan, J., Jacobs, K., Tannenbaum, R., Sharam, M., Jasiuk, I. (2004) Experimental trends in polymer nanocomposites – a review. Materials Science and Engineering A, Vol. 393, N 1, p.1 - 11.

[70 Yoon P. J., Fornes T. D., Paul D. R. (2002) Thermal expansion behaviour of nylon 6 nanocomposite, Polymer, 43,  p. 6727-6741.

[71] Bryan Ellis, (1993) Chemistry and Technology of Epoxy Resins, Springer Science+Business Media Dordrecht.

[72] W.W. Wright, (1981) The effect of diffusion of water into epoxyresins and their carbon-fibre reinforced composites, Composites., 201, 205

[73] N. Merah and M. Al-Qadhi, (2013) Effects of Processing Techniques on Morphology and Mechanical Properties of Epoxy-Clay Nanocomposites, Advanced Materials Research Vols. 652-654 pp 167-174, doi:10.4028/www.scientific.net/AMR.652-654.167

[74] Kornmann, X., H. Lindberg, and L. A. Berglund. (2001) Synthesis of epoxy-clay nanocomposites:Influence of the nature of the clay on structure. Polymer 42: 1303–1310.

[75] Hussian, M., R. J. Varley, Z. Mathys, B. Cheng, and G. P. Simon. (2004) Effect of organo phosphorus and nano clay materials on the thermal and fire performance of epoxy resins.J. Appl. Polym. Sci. 91: 1233–1253.

[76] A. Chandramohan, M. Mandhakini , K. Dinakaran, and M. Alagar, (2012) Preparation and Characterization of Vinyl Ester Monomer–Toughened Epoxy-Clay Hybrid Nanocomposites: Thermal and Morphological Properties, International Journal of Polymer Anal. Charact., 17: 477–484.

[77] Brown JM, Curliss D, Vaia RA, (2000) Thermoset-Layered Silicate Nanocomposites. Quaternary Ammonium Montmorillonite with Primary Diamine Cured Epoxies, Chem Mater 12:3376

[78] Musto P, Ragosta G, Russo P, Mascia L , (2001) Thermal‐Oxidative degradation of epoxy and epoxy‐Bismaleimide networks: kinetics and mechanism, Macromol Chem Phys 202:3445.

[79] Tjong SC, (2006) Structural and mechanical properties of polymer nanocomposites, Mat Sci Eng R 53:73

[80] Pinnavaia GB (2000) Polymer-clay nanocomposites, Chapter 7.Wiley, New York.

[81] Kelly P, Akelah A, Qutubuddin S, Moet A, (1994) Reduction of residual stress in montmorillonite/epoxy compounds,  J Mater Sci 29:2274

[82] Rongpeng Wang, Thomas Schuman, R. R. Vuppalapati, and K. Chandrashekhara, (2014) Fabrication of bio-based epoxy–clay nanocomposites, Green Chem., 16, 1871–1882.

[83] Forcier RA. In: Coombs CF, editor. (1995) Printed circuits handbook, 4th ed. New York: McGraw-Hill;. p. 9.10–9.17. Chapter 9.

[84] Chander R, Rajabi L and Soni RK. (1996) The effect of bismaleimide resin on curing kinetics of epoxy-amine thermosets. J Appl Polym Sci 1996; 62, 661–671.

[85] YL. Liu, GH. Hsiue, RH. Lee, YS. Chiu, (1997) Phosphorus-containing epoxy for flame retardant. III: Using phosphorylated diamines as curing agents. J Appl Polym Sci., 63, 895–901,.

[86] Fathollah Taheri Beh rooz, Mahdi Torabi, and Sajjad Fakhreddini, (2020) Experimental study of the effect of temperature on the mechanical properties of epoxy filled with clay nanoparticles, 28th Annual International Conference on Mechanical Engineering of Iran, ISME

[87] Izzuddin Zamana, Fethma M. Nor, Bukhari Manshoor, Amir Khalid, and Sherif Araby, (2015) Influence of interface on epoxy/clay nanocomposites: 1. morphology structure, Procedia Manufacturing 2 17 – 22.

[88] N.G. Berry, J.R.M. d’Almeida, F.L. Barcia, B.G. Soares, (2007) Effect of water absorption on the thermal–mechanical properties of HTPB modified DGEBA-based epoxy systems, Polymer Testing 26 262–267.

[89] Uyama, H., Kuwabara, M., Tsujimoto, T., Nakano, M., Usuki, A., Kobayashi, S., (2003) Green nanocomposites from renewable resources: plant oilclay hybrid materials. Chemistry of Materials 15, 2492e2494.

[90] Miyagawa, H., Mohanty, A., Drzal, L.T., Misra, M., (2004a) Effect of clay and alumina nanowhisker reinforcements on the mechanical properties of nanocomposites from biobased epoxy: a comparative study. Industrial & Engineering Chemistry Research 43, 7001e7009.

[91] Lu, J., Hong, C.K., Wool, R.P., (2004) Bio-based nanocomposites from functionalized plant oils and layered silicate. Journal of Polymer Science Part B: Polymer Physics 42, 1441e1450.

[92] Miyagawa, H., Misra, M., Drzal, L.T., Mohanty, A.K., (2005) Novel biobased nanocomposites from functionalized vegetable oil and organically-modified layered silicate clay. Polymer 46, 445e453.

[93] Lu, Y., Larock, R.C., (2007) Bio-based nanocomposites from corn oil and functionalized organoclay prepared by cationic polymerization. Macromolecular Materials and Engineering 292, 863e872.

[94] Das, G., Karak, N., (2009a) Epoxidized Mesua ferrea L. seed oil-based reactive diluent for BPA epoxy resin and their green nanocomposites. Progress in Organic Coatings 66, 59e64.

[95] Das, G., Karak, N., (2010) Thermostable and flame retardant Mesua ferrea L. seed oil based non-halogenated epoxy resin/clay nanocomposites. Progress in Organic Coatings 69, 495e503.

[96] Zia, K.M., Zuber, M., Barikani, M., Hussain, R., Jamil, T., Anjum, S., (2011) Cytotoxicity and mechanical behavior of chitinebentonite clay based polyurethane bio-nanocomposites. International Journal of Biological Macromolecules 49, 1131e1136.

[97] Das, G., Kalita, R.D., Deka, H., Buragohain, A.K., Karak, N., (2013) Biodegradation, cytocompatibility and performance studies of vegetable oil based hyperbranched polyurethane modified biocompatible sulfonated epoxy resin/clay nanocomposites. Progress in Organic Coatings 76, 1103e1111.

[98] Haq, M., Burgue~no, R., Mohanty, A.K., Misra, M., (2009a) Bio-based unsaturated polyester/layered silicate nanocomposites: characterization and thermo-physical properties. Composites Part A: Applied Science and Manufacturing 40, 540e547.

[99] Albayrak, O., Sen, S., Cayli, G., Ortac, B., (2013) Bio-based polymer nanocomposites based on layered silicates having a reactive and renewable intercalant. Journal of Applied Polymer Science 130, 2031e2041.