Еxpeгimental investigаtion of сutting cоnditions рarameters on surfаce roughness in aluminum alloys (AL-2024)

Faraj Huayier, Abdullah

doi:10.30772/qjes.v15i3.826

	Еxpeгimental investigаtion of сutting cоnditions рarameters on surfаce roughness in aluminum alloys (AL-2024)
Al-Qadisiyah Journal for Engineering Sciences
Volume 15, Issue 3, September 2022, Pages 141-146 PDF (574.33 K)
Document Type: Research Paper
DOI: 10.30772/qjes.v15i3.826
Author
Abdullah Faraj Huayier^*
Department of Production Engineering & Metallurgy, University of Technology, Baghdad, Iraq
Abstract
The purpose of this search is to study the main factors on the surface roughness in (AL-2024) using a CNC milling machine for an HSS tool with flat end milling. And by using the Taguchi experience design method to conserve time and costs. To determine the optimal values of surface roughness using Taguchi optimization. We then performed an analysis of variance and regression. Confirmation tests were performed to verify work. The cutting process consists of two stages; the first stage is the cutting process in the upper direction of the cutting, using a coolant and dry cutting. The second stage is the cutting process in the lower direction of the cut, using a coolant and dry cutting the results show the best operating condition to obtain the best surface roughness of the product by using the bottom grinding, measuring the surface process surface roughness using the cutting conditions of the cutter (feeding) = 15 mm/min), (cutting depth = 1 mm) and (cutting speed = 37.68 (m/min) surface roughness (Ra = 0.17 µm) compared with the other value obtained.
Keywords
Surface Roughness; Metal Cutting; Cutting Feed; Depth of Cut

References
Zhai, C.; Y.; Hanauer, D.; Proust, G.; Restraint, D."The Role of Surface Structure In Normal Contact Stiffness" (2016). ASM Metals Handbook Vol. 2, Properties and Selection of Nonferrous Alloys and Special Purpose Materials, ASM International. Erdal Karakoç, Orhan Çakır, Examination of surface roughness values of 6061-T6 aluminum material after machining and after anodizing process, Materials Today: Proceedings, Volume 80, Part 1, 2023, Pages 32-39, https://doi.org/10.1016/j.matpr.2022.10.058. Ali Fahem, Addis Kidane, Michael A. Sutton, Geometry factors for Mode I stress intensity factor of a cylindrical specimen with spiral crack subjected to torsion, Engineering Fracture Mechanics, Volume 214, 2019, Pages 79-94, ISSN 0013-7944, https://doi.org/10.1016/j.engfracmech.2019.04.007. Ali Fahem, Addis Kidane, Michael A. Sutton, Mode-I dynamic fracture initiation toughness using torsion load, Engineering Fracture Mechanics, Volume 213, 2019, Pages 53-71, ISSN 0013-7944. https://doi.org/10.1016/j.engfracmech.2019.03.039. Richárd Horváth, Ágota Drégelyi-Kiss, Analysis of surface roughness of aluminum alloys fine turned: United phenomenological models and multi-performance optimization, Measurement, Volume 65, 2015, Pages 181-192, ISSN 0263-2241, https://doi.org/10.1016/j.measurement.2015.01.013. Damjan Klobčar, Janez Tušek, Thermal stresses in aluminium alloy die casting dies, Computational Materials Science, Volume 43, Issue 4, 2008, Pages 1147-1154, ISSN 0927-0256, https://doi.org/10.1016/j.commatsci.2008.03.009. Fahem, A.F., Kidane, A. (2020). Mixed Mode (Mode I/III) Dynamic Fracture Initiation Toughness of Aluminum Alloy. In: Silberstein, M., Amirkhizi, A., Shuman, X., Beese, A., Berke, R., Pataky, G. (eds) Challenges in Mechanics of Time Dependent Materials, Fracture, Fatigue, Failure and Damage Evolution, Volume 2. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, Cham. https://doi.org/10.1007/978-3-030-29986-6_10 Neslihan ÖZSOY, “Experimental Investigation of Surface Roughness of Cutting Parameters in T6 Aluminum Alloy Milling Process” Vol. 5-No.3 (2019) pp. 105-111. Ojolo Sunday Joshua1,*, Money Ochuko David1, Ismail Oluwarotimi Sikiru2, “ Experimental Investigation of Cutting Parameters on Surface Roughness Prediction during End Milling of Aluminium 6061 under MQL (Minimum Quantity Lubrication), Journal of Mechanical Engineering and Automation 2015, 5(1): 1-13. https://api.semanticscholar.org/CorpusID:85524872 Pillai JU, Sanghrajka I, Shunmugavel M, Muthuramalingam T, Goldberg M, Littlefair G, “Optimisation of multiple response characteristics on end milling of aluminum alloy using Taguchi-Grey relational approach” Measurement 124, 291-298, 2018 DOI: 10.1016/j.measurement.2018.04.052. Parida AK, Routara BC, Bhuyan RK, “Surface roughness model and parametric optimization in the machining of GFRP composite: Taguchi and response surface methodology approach” Materials Today: Proceedings 2, 3065-3074, 2015. https://api.semanticscholar.org/CorpusID:111414225 Tosun N, Kuru C, Altıntaş E, Erdin OE, “Investigation of surface roughness in milling with air and conventional cooling method” Journal of Faculty of Engineering and Architecture of Gazi University 25,141-146, 2010 Günay M, “Optimization with Taguchi method of cutting parameters and tool nose radius in the machining of AISI 316L steel” Journal of the Faculty of Engineering and Architecture of Gazi University 28, 437- 444, 2013. Pinar AM, Filiz S, Ünlü BS, “A comparison of cooling methods in the pocket milling of AA5083-H36 alloy via Taguchi method” The International Journal of Advanced Manufacturing Technology 83, 1431–1440, 2016 DOI: 10.1007/s00170-015-7666-1. Groover, P. M., "Fundamentals of Modern Manufacturing", WILEY Inc., 2. International Edition. Montgomery DC, “Design and Analysis of Experiments”, Wiley, New York, 2007. Precious A, “Optimization of circular antenna arrays using a differential search algorithm” Acta Physica Polonica A 128,7-8, 2015 DOI: 10.12693/APhysPolA.128.B-7. Ozsoy M, Kurnaz C, “An optimization study of a hydraulic gear pump cover with finite element method” Acta Physica Polonica A 132, 944-948, 2017 DOI: 10.2693/APhysPolA.132.944. Filiz İH, Olguner S, Evyapan E,” A study on optimization of planetary gear trains” Acta Physica Polonica A 132:728-733, 2017. DOI: 10.12693/APhysPolA.132.728
Statistics Article View: 205 PDF Download: 190