- All Journals
- Al-Qadisiyah University
- Basrah University
- Kirkuk University
- Mosul University
- The Iraqi Borad for Medical Specialization
- University of Anbar
- University of Technology
- Al Mustafa University
- Al-Zahraa University for Women
- Alnoor University
- Kunooz University
- Misan University
- Ninevah University
- Tikrit University
- University of Al-Hamdaniya
- University of Kerbala
Mechanical properties of reactive powder concrete: a comparison study | ||
| Al-Qadisiyah Journal for Engineering Sciences | ||
| Volume 13, Issue 4, November 2020, Pages 246-252 PDF (1.01 M) | ||
| DOI: 10.30772/qjes.v13i4.670 | ||
| Authors | ||
| zahraa hadi marzoq; Tumadhir Merawi Borhan | ||
| Department of Civil Engineering, University of Al-Qadisiyah, Iraq. | ||
| Abstract | ||
| Reactive Powder Concrete (RPC) is one of the new and most important concrete manufacturing advancements. A significant number of researchers have studied the mechanical properties of such type of concrete and the effect of different parameters on it. Some of these researchers presented questions to predict the properties of reactive powder concrete depends on its components and the method of curing. This research presents an experimental investigation on the mechanical properties of RPC such as compressive strength, splitting tensile strength and flexural strength. The findings were compared to the previous studies’ experimental work and formulated equations. | ||
| Keywords | ||
| Reactive powder concrete; Mechanical properties; Compressive strength; Splitting tensile strength; Flexural strength | ||
| References | ||
|
Richard, P. and Cherezy, M., "Reactive Powder Concrete with High Ductility and 200-800 MPa Compressive Strength". ACI SP144-24, 1994: p. pp. 507-518.
Richard, P. and M. Cheyrezy, "Composition of reactive powder concretes". Cement and concrete research, 1995. 25(7): p. 1501-1511.
Roux, N., Andrade, C. and Sanjuan, M., "Experimental study of durability of reactive powder concretes". Journal of materials in civil engineering, 1996. 8(1): p. 1-6.
Biolzi, L., Guerrini, G.L. and Rosati, G., "Overall structural behavior of high strength concrete specimens". Construction and Building Materials, 1997. 11(1): p. 57-63.
Orgass, M. and .Klug, Y., "Steel Fiber Reinforced Ultra High Strength Concretes", 2004: p. 12 pp.
Chan, Y. and Chu, S., "Effect of silica fume on steel fiber bond characteristics in reactive powder concrete". Cement and concrete research, 2004. 34(7): p. 1167-1172.
Gao, X., "Mix design and impact response of fibre reinforced and plain reactive powder concrete". 2007.
Fujikake, K., Senga, T., Ueda, N., Ohno, T. and Katagiri, M., "Effects of strain rate on tensile behavior of reactive powder concrete". Journal of Advanced Concrete Technology, 2006. 4(1): p. 79-84.
Tai, Y., "Uniaxial compression tests at various loading rates for reactive powder concrete". Theoretical and Applied Fracture Mechanics, 2009. 52(1): p. 14-21.
Maroliya, M. and Modhera, C., "Influence of type of superplasticizers on workability and compressive strength of reactive powder concrete". International Journal of Advanced Engineering Technology, 2010. 1: p. 123-130.
Yu, R., Spiesz, P. and Brouwers, H., "Mix design and properties assessment of ultra-high performance fibre reinforced concrete (UHPFRC)". Cement and concrete research, 2014. 56: p. 29-39.
Ng, K.M., Tam, C.M. and Tam, V.W., "Studying the production process and mechanical properties of reactive powder concrete: a Hong Kong study". Magazine of concrete research, 2010. 62(9): p. 647-654.
ASTM C150/C150M, "Standard specification for portland cement", 2012: American Society for Testing and Materials, USA.
ASTM C1240-04, “Standard Specification for the Use of Silica Fume as a Mineral Admixture in Hydraulic Cement Concrete, Mortar and Grout”, Vol. 4.2, 2004, 6p.
ASTM C494/C494M-1999a, “Standard Specification for Chemical Admixtures for Concrete”, Vol. 4.2, 1999, 9p.
ASTM A 820/A 820M-04 “ Standered Specification for Steel Fiber for Fiber-Reinforced Concrete “ , 2004,pp.1-4.
Hannawayya, S. P.Y., "Behavior of Reactive Powder Concrete Beams in Bending", Ph.D. Thesis, Building and Construction Engineering Department. 2010, University of Technology: Baghdad. p. 239.
Ismael, M.A., "Flexural Behavior of Reactive Powder Concrete Tee Beams", Ph.D. Thesis, civil Engineering Department,. 2013, University of Al- Mustansiriya: Baghdad. p. 122.
BS EN 12390 -3, "Testing hardened concrete. Method of determination of compressive strength of concrete cubes". 2000.
ASTM C39/C39M-05, “Standard Test Method for Compressive Strength of Cylindrical Test Specimens”, Vol. 04.02, 2003.
Neville, A.M., "Properties of concrete". Vol. 4. 1995: Longman London.
Graybeal, B.A., "Material property characterization of ultra-high performance concrete". 2006, United States. Federal Highway Administration.
Qasim, O.A., "Behavior of reinfoced reactive powder concrete slabs with openings", Ph.D. Thesis, civil engineering department. 2013, Al-Nahrain University: Baghdad. p. 214.
Tue, N.V., Ma, J. and Orgass, M., "Influence of addition method of superplasticizer on the properties of fresh UHPC". in Proceedings of the 2nd International Symposium on Ultra-High Performance Concrete, Kassel, Germany. 2008.
Ma'roof, A.S.A., "Behavior of reactive powder concrete deep beams", Ph.D. Thesis, Civil Engineering. 2013, College of Engineering of Alnahrain: Baghdad. p. 228.
Ma, J., Dietz, J. and Dehn, F., "Ultra high performance self compacting concrete". Lacer, 2002. 7: p. 33-42.
Danha, L. S., "Tensile Behavior of Reactive Powder Concrete", M.Sc. Thesis, Building and Construction Engineering Department. 2012, University of Technology: Baghdad. p. 115.
ACI Committee 318M-318RM, "Building Code Requirements for Structural Concrete and Commentary”, American Concrete Institute, Farmington Hills, Michigan, 2011, 503 pp.
Carino, N.J. and Lew. H. "Re-examination of the relation between splitting tensile and compressive strength of normal weight concrete". in Journal Proceedings. 1982.
Arioglu, N., Girgin, Z.C. and Arioglu, E., "Evaluation of Ratio between Splitting Tensile Strength and Compressive Strength for Concretes up to 120 MPa and its Application in Strength Criteria", , Vol., , pp. . ACI Materials Journal, 2006. 103(No. 1): p. 18-24.
Vogel, H., Noel, M., Davoudi, S. and Svecova, D., "Evaluation of properties of high strength concrete for prestressed concrete prisms". in Proceedings of the Second International Symposium on Ultra High Performance Concrete. 2008.
Thomas, J. and Ramaswamy, A., “Mechanical Properties of Steel Fiber-Reinforced Concrete". Journal of Materials in Civil Engineering,, , pp.. (2007). Vol. 19(No. 5): p. 385-392.
Al-Ne’aime, S.S.H., "Static and Impact Properties of Reactive Powder Concrete", Ph.D. Thesis, Building and Construction Engineering Department. ( 2006 ), University of Technology: Baghdad. p. 190p.
Mahdi, B.S., "Properties of Self Compacted Reactive Powder Concrete Exposed to Saline Solution", Ph.D. Thesis, Building and Construction Engineering Department. 2009, University of Technology: Baghdad. p. 223p.
Ridha, M., "Shear behavior of reactive powder concrete beams". 2010, Ph. D. Thesis, Building and Construction Engineering Department, University of Technology, Baghdad, 2010, 204pp.
Al-Wahili, A., "Mechanical Properties of Steel Fiber Reinforced Reactive Powder concrete", M.Sc. Thesis, Building and Construction Engineering Department. (2005), University of Technology: Baghdad. p. 123.
Ali, H.M. and Hamad, N.T., "Shear Capacity and Mechanical Properties of Reactive Powder Concrete T-Beams". Journal of Engineering and Sustainable Development, 2014. 18(4): p. 188-213.
Kasser, F.M., "Mechanical Properties of Reactive Powder Self Compacting Concrete", M.Sc. Thesis, Building and Construction Engineering Department. ( 2007), University of Technology: Baghdad. p. 132.
| ||
|
Statistics Article View: 201 PDF Download: 135 |
||