Simultaneous Extraction of Lead, Copper, and Cadmium from Aqueous Solution using Emulsion Liquid Membrane Technique

A. Shamkhia, Hassan; D. Z. Albdiria, Amer

doi:10.30772/qjes.v13i3.705

	Simultaneous Extraction of Lead, Copper, and Cadmium from Aqueous Solution using Emulsion Liquid Membrane Technique
Al-Qadisiyah Journal for Engineering Sciences
Volume 13, Issue 3, September 2020, Pages 183-188 PDF (741.2 K)
DOI: 10.30772/qjes.v13i3.705
Authors
Hassan A. Shamkhia; Amer D. Z. Albdiria
Chemical Engineering Department - college of Engineering – University of Al-Qadisiyah-Iraq
Abstract
A simultaneous extraction study of lead, copper, and cadmium from diluted aqueous solution through Emulsion Liquid Membrane (ELM) technique was conducted and extensive investigations of the impact of the pH of the feed phase, homogenizer speed, surfactant (Span 80) and carrier (D2EHPA) concentrations, and ratio of external to membrane phase on the system stability (breakage) and removal efficiencies of Pb²⁺, Cu²⁺,Cd²⁺ ions were experimentally carried out. Kerosene was used as the membrane and stabilized by Sorbitan monooleate (Span 80) as the emulsifier. Bis-2-Ethylhexyl phosphoric acid (D2EHPA) as an extractant and H₂SO₄ as a reagent (internal phase) were utilized. Lead, Copper, and Cadmium extraction efficiencies of 100%, 100%, and 98% were obtained respectively under specific operating conditions. The emulsion stability of the system was studied, and breakage of 1.8% under the best operating condition was obtained. High reagent (H₂SO₄) concentration (0.5 M) maintained the simultaneous extraction of the three heavy metals (lead, copper, and cadmium) and minimizes the probable interaction and competing mechanism between them in the extraction stage.
Keywords
Emulsion Liquid Membrane; Simultaneous extraction of heavy metals; Emulsion stability; Extraction efficiency; Emulsification

Statistics Article View: 201 PDF Download: 117