Removal of Cadmium from Simulated Wastewater using Rotating Tubular Packed Bed Electrochemical Reactor: Optimization through Response Surface Methodology

N. Abbas, Zahraa; H. Abbar, Ali

doi:10.30772/qjes.v13i2.651

	Removal of Cadmium from Simulated Wastewater using Rotating Tubular Packed Bed Electrochemical Reactor: Optimization through Response Surface Methodology
Al-Qadisiyah Journal for Engineering Sciences
Volume 13, Issue 2, June 2020, Pages 91-98 PDF (1.13 M)
DOI: 10.30772/qjes.v13i2.651
Authors
Zahraa N. Abbas; Ali H. Abbar
Chemical Engineering Department -Faculty of Engineering – University of Al-Qadisiyah-Iraq
Abstract
A rotating tubular packed bed electrochemical reactor was used for the electrochemical removal of cadmium (Cd) from simulated wastewater. Impacts of electrolysis operating parameters: current (0.56–2.8 A), rotation speed (100–500 rpm), initial cadmium concentration (20–100 ppm), and pH (3-9) were investigated. Response surface methodology and Box-Behnken design were used for optimizing the process parameters where cadmium Removal Efficiency (RE %) was selected as a response function. Findings of the present work suggested that currently has a main impact on the removal efficiency of cadmium followed by rotation speed, then concentration and pH. The results of the regression analysis showed that experimental data could be fitted to a second-degree polynomial model with value of the determination coefficient (R2) equal to 91.8 %. Optimal conditions for process parameters based on the RSM model were initial Cd concentration of 32.0 ppm, current of 2.8 A, rotation speed of 371 rpm and pH = 3, where a final cadmium concentration less than 0.3 ppm was obtained after 30 min of electrolysis process (RE= 99.28% ).
Keywords
three-dimensional electrod; rotating cylinder electrode; woven screens; cadmium removal; Response surface methodology

Statistics Article View: 216 PDF Download: 139