Naser, S., Anaee, R., Jaber, H. (2023). Deposition of GdSmTi Coating for Corrosion Control of SS 316L in Bio-Field. , 41(6), 836-844. doi: 10.30684/etj.2023.138741.1404
Shaimaa A. Naser; Rana A. Anaee; Hussein A. Jaber. "Deposition of GdSmTi Coating for Corrosion Control of SS 316L in Bio-Field". , 41, 6, 2023, 836-844. doi: 10.30684/etj.2023.138741.1404
Naser, S., Anaee, R., Jaber, H. (2023). 'Deposition of GdSmTi Coating for Corrosion Control of SS 316L in Bio-Field', , 41(6), pp. 836-844. doi: 10.30684/etj.2023.138741.1404
Naser, S., Anaee, R., Jaber, H. Deposition of GdSmTi Coating for Corrosion Control of SS 316L in Bio-Field. , 2023; 41(6): 836-844. doi: 10.30684/etj.2023.138741.1404

Deposition of GdSmTi Coating for Corrosion Control of SS 316L in Bio-Field

Engineering and Technology Journal
Volume 41, Issue 6, 2023, Pages 836-844    PDF (1.51 M)
Document Type: Research Paper
DOI: 10.30684/etj.2023.138741.1404
Authors
Shaimaa A. Naser; Rana A. Anaee* ; Hussein A. Jaber
Materials Engineering Dept., University of Technology-Iraq, Alsina’a street, 10066 Baghdad, Iraq.
Abstract
The corporation of rare earth metals (lanthanides series) with other metals gives good properties in different fields, such as protecting the metallic surface from corrosion risk. In this work, the investigation on adding gadolinium (Gd) and samarium (Sm) as rare metals to bio-inert titanium (Ti) as transition metal was done to protect stainless steel (SS 316L) as bio metallic implant which is used in biofield because of its excellent mechanical properties, low costs, biocompatibility, inertness, and mechanical properties, chemical stability, workability, and high corrosion resistance. The corporation was done through coating using direct current (DC) sputtering technique from the target of these metals mixture to measure some properties. The surface characterization by X-ray diffraction (XRD) gave many phases represented by different GdxNiy in addition to the Ni3Ti phase and Ni5Sm phase. The scanning electron microscopy and energy dispersive X-ray spectroscopy (SEM/EDS) results showed the distribution of coating metals as a dense thin film with a good ratio of coating metals; this dense film gave lower surface roughness as illustrated through Atomic force microscopy (AFM) examination from 25.20 nm for the uncoated sample to 15.12 nm for the coated sample with a reduction in the hardness from 187 HV  for the uncoated sample to 119 HV for the coated sample as well as increasing contact angle test (wettability) from 90° for base stainless steel surface to 117.723° for coated surface, these results enhanced the compatibility with giving good resistance from corrosion test, with achieving protection efficiency equal to 99.02%.

Highlights
  • GdSm-Ti coating enhances stainless steel's corrosion resistance, achieving a protection efficiency of 99.02%.
  • The dense compact layer formed by GdSm-Ti coating reduces surface roughness and improves wettability.
  • Coated stainless steel shows excellent corrosion protection and enhanced osteointegration.
Keywords
Samarium; Gadolinium; Titanium; Coating; Bioimplant; Sputtering
References
  1. Rafique, M. Idrees, A. Nasim, H. Akbar and A. Athar, Transition metal complexes as potential therapeutic agents, Biotechnol. Mol. Biol. Reviews, 5 (2010) 38‒45.  
  2. B. Jensen, The place of zinc, cadmium, and mercury in periodic table, J. Chem. Educ., 8 (2003) 952‒961. https://doi.org/10.1021/ed080p952
  3. Cârâc, Biological and biomedical applications of the lanthanides compounds : a mini Review, Proc. Rom. Acad., 19 (2017) 69‒74.
  4. Sathishkumar, K. Louis, E. Shinyjoy and D. Gopi, Tailoring the Sm/Gd substituted hydroxyapatite coating on biomedical AISI 316L SS: exploration of corrosion resistance, protein profiling, osteocompatibility and osteogenic differentiation for orthopedic implant applications, Ind. Eng. Chem. Res., 10 (2016) 2‒49. https://doi.org/10.1021/acs.iecr.5b04329
  5. Achache, S. Lamri, M. A. Yazdi, A. Billard, M. François and F. Sanchette, Ni-free super elastic binary Ti–Nb coatings obtained by DC magnetron Co-sputtering, Surf. Coat. Technol., 275 (2015) 283‒288. https://doi.org/10.1016/j.surfcoat.2015.05.005
  6. Cristea, I. Velicu, L. Cunha, N. Barradas, E. Alves and V. Craciun, Tantalum-titanium oxynitride thin films deposited by DC reactive magnetron Co-Sputtering: mechanical, optical, and tlectrical characterization, Coatings, 12 (2022) 1‒16. https://doi.org/10.3390/coatings12010036
  7. Ding, Q. Zhou, Y. Wang, Z. Ding, Y. Tang and Q. He, Microstructure and properties of monolayer, bilayer and multilayer Ta2O5-based coatings on biomedical Ti-6Al-4V alloy by magnetron sputtering, Ceram. Int., 47 (2021) 1133-1144. https://doi.org/10.1016/j.ceramint.2020.08.230
  8. Briois, M. A. Yazdi, N. Martin and A. Billard, Pt–Ti alloy coatings deposited by DC magnetron sputtering: A potential current collector at high temperature, Coatings, 10 (2020) 1‒10. https://doi.org/10.3390/coatings10030224
  9. Mazur, T. Howind, D. Gibson, D. Kaczmarek, Sh. Song, D. Wojcieszak, W. Zhu, P. Mazur, J. Domaradzki and F. Placido, Investigation of structural, optical and micro-mechanical properties of (NdyTi1 − y) Ox thin films deposited by magnetron sputtering, Mater. Des., 85 (2015) 377‒388. https://doi.org/10.1016/j.matdes.2015.07.005
  10. L. Iconaru, A. Groza, S. Gaiaschi, K. Rokosz, S. Raaen, S. C. Ciobanu, P. Chapon and D. Predoi, Antimicrobial properties of samarium doped hydroxyapatite suspensions and coatings, Coatings, 10 (2020) 1124. https://doi.org/10.3390/coatings10111124
  11. Saranya , S. Bhuvaneswari, S. Chatterjee and N. Rajendran, Biocompatible gadolinium-coated magnesium alloy for biomedical applications, J. Mater. Sci., 55 (2020) 11582‒11596.
  12. Saranya, M. Kalaiyarasan, P. Agilan and N. Rajendran, Biofunctionalization of Mg implants with gadolinium coating for bone regeneration, Surf. Interfaces., 31 (2022) 1‒13. https://doi.org/10.1016/j.surfin.2022.101948
  13. Kannan and R. Nallaiyan, Anticancer activity of samarium-coated magnesium implants for immunocompromised patients, ACS Appl. Bio Mater., 3 (2020) 4408‒ 4416. https://doi.org/10.1021/acsabm.0c00400
  14. C. Nica, M. Popa, L. Marutescu, A. Dinischiotu, S. L. Iconaru, S. C. Ciobanu and D. Predoi, Biocompatibility and antibiofilm properties of samarium doped hydroxyapatite coatings: an in vitro study, Coatings, 11 (2021) 1185. https://doi.org/10.3390/coatings11101185
  15. Kirchmayr, H.R., Burzo E. Landolt-Börnstein-Group III Condensed Matter Numerical Data and Functional Relationships in Science and Technology, Springer-Verlag, Berlin, 1990.
  16. Xu , Y.-W. Cui , H. Fei , L. Zhang , F. Zheng , L. Liu and Z. Jin, Phase equilibria in the Gd –Ni binary and Mg –Ni –Gd ternary systems, Int. J. Mater. Res., 103 (2012) 1179‒1187. https://doi.org/10.3139/146.110756
  17. Padayachee, A. S. Mahomed, S. Singh and H. B. Friedrich, Effect of the TiO2 anatase/rutile ratio and interface for the oxidative activation of  n-octane, ACS catal.,  10 (2020) 2211–2220. https://doi.org/10.1021/acscatal.9b04004
  18. Shalini and S. A. Shivashankar, Oriented growth of thin films of samarium oxide by MOCVD, Bull. Mater. Sci., 28 (2005) 49–54.
  19. H. Mayrhofer, H. Clemens and C. Mitterer, Interfaces in nanostructured thin films and their influence on hardness, Int. J. Mater. Res., 96 (2005) 468‒480.
  20. Touzi, Y. Chevalier, M. Martin, H. B. Ouada and N. J. Renault, Detection of gadolinium with an impedimetric platform based on gold electrodes functionalized by 2-methylpyridine-substituted cyclam, Sensors , 21 (2021) 2‒18. https://doi.org/10.3390/s21051658
Statistics
Article View: 616
PDF Download: 329


Journal Management System. Powered by iJournalPro.com