Abdullah Al-Obaidi, Z. (2023). The assessment of using fiber produced from plastic broom bristles on the impact property of normal-weight concrete slabs. , 16(4), 268-272. doi: 10.30772/qjes.2023.180346
Zayd A. Abdullah Al-Obaidi. "The assessment of using fiber produced from plastic broom bristles on the impact property of normal-weight concrete slabs". , 16, 4, 2023, 268-272. doi: 10.30772/qjes.2023.180346
Abdullah Al-Obaidi, Z. (2023). 'The assessment of using fiber produced from plastic broom bristles on the impact property of normal-weight concrete slabs', , 16(4), pp. 268-272. doi: 10.30772/qjes.2023.180346
Abdullah Al-Obaidi, Z. The assessment of using fiber produced from plastic broom bristles on the impact property of normal-weight concrete slabs. , 2023; 16(4): 268-272. doi: 10.30772/qjes.2023.180346
The assessment of using fiber produced from plastic broom bristles on the impact property of normal-weight concrete slabs
Department of General Sciences, College of Basic Education, Haditha, University of Anbar, Iraq
Abstract
The importance of plastic has emerged in many modern industries, and petroleum is an essential source for the manufacture of many materials of importance in our contemporary life, such as plastic bags, paints, brooms that are used for cleaning, and others. This study showed that it is possible to use these plastic products in other ways to reduce the plastic pollution that invades the world, and one of these ways is the possibility of adding plastic to concrete to improve some of its properties. In this work, the bristles of plastic brooms are used in the form of fibers to improve the properties of concrete, and the results showed a significant improvement in the resistance to compression, flexural, and impact resistance of concrete, in addition to a slight decrease in the density. The fibers were added in different proportions (0.6, 1.0, and 1.4) as a percentage of the concrete volume, and the duration of the test ranged between (7 and 28) days for the tests of compression, flexion, and density, while the impact resistance tested at the age of 90 days.
Henry, M. and Kato, Y. (2014) Sustainable concrete in Asia: Approaches and barriers considering regional context Construction and Building Materials 67 pp 399-404 https://doi.org/10.1016/j.conbuildmat.2013.12.074
Lehne, J. and Preston, F. (2018) Making Concrete Change: Innovation in Low-carbon Cement and Concrete Chatham House Report pp 8-22
Turk, J. et al. (2015) Environmental evaluation of green concretes versus conventional concrete through LCA Waste ManagementVol 45 pp 194-205 https://doi.org/10.1016/j.wasman.2015.06.035
Marinković, S. et al. (2017) et al Environmental assessment of green concretes for structural use Journal of Cleaner ProductionVol 154 pp 633-649, https://doi.org/10.1016/j.jclepro.2017.04.015
Petek Gursel, A. (2014) Life-cycle inventory analysis of concrete production: A critical review Cement and Concrete Composites 51 pp 38-48
Ibrahim, M. et al. (2020) Hydroxyapatite, a multifunctional material for air, water, and soil pollution control: A review Journal of Hazardous Materials Vol 383 pp 121-139
Antelava, A. et al. (2019) Plastic Solid Waste (PSW) in the Context of Life Cycle Assessment (LCA) and Sustainable Management Environmental Management Vol 64 pp 230–244
Anandamurthy, A. et al. (2017) A review of fibrous reinforcements of concrete Journal of Reinforced Plastics and Composites Vol 36 pp 519-552
Saxena, R. et al. (2018) Impact resistance and energy absorption capacity of concrete containing plastic waste Construction and Building Materials Vol 176 pp 415–421
Foti, D. (2019) Recycled waste PET for sustainable fiber-reinforced concrete Wood head Publishing Series in Civil and Structural Engineering pp 387–410, https://doi.org/10.1016/B978-0-08-102676-2.00018-9
Al-Hadithi, A. and Al-Obaidi, Z. (2015) Behavior of Ferro-cement Slabs Containing Waste Plastic Fibers under Impact Loadings Ciência e Técnica Vitivinícola Vol 30-5 pp 205-219
Al-Obaidi, Z. (2021) Mechanical and impact properties of concrete slabs reinforced with Waste plastic fiber with adding recycled aggregates J. Phys.: Conf. Ser. 1895 012009
Al-Obaidi, Z. (2021) Properties of no-fines recycled aggregate concrete contains waste plastic fibers J. Phys.: Conf. Ser. 1895 012012. DOI1088/1742-6596/1895/1/012012
ASTM C150 (1989) Standard Specification for Portland cement Annual Book of ASTM Standards American Society for Testing and Materials Section 4 Vol 04-02 pp 89-92
IQS 5 (1984) Portland cement annual book of Iraqi standards (Planning Council, The Central Agency for Standardization and Quality Control / Iraq) pp 1-10
IQS 45 (1984) Aggregate from Natural Sources for Concrete Technical Specifications for Civil Work (Planning Council, The Central Agency for Standardization and Quality Control / Iraq) Vol 1 pp 19-27
ASTM C I92 (2002) Standard Practice for Making and Curing Test Specimens in the Laboratory Annual Book of ASTM Standard (West Conshohocken PA USA Philadelphia) Vol 04-02 pp 1-8 DOI: 10.1520/C0192_C0192M-15
ASTM C 642 (2006) Standard Test Method for Density Absorption and Void in Hardened Concrete Annual Book of ASTM Standard (West Conshohocken PA. USA) 3 pages
BS 1881-116 (1989) Method for Determination of Compressive Strength of Concrete Cubes British Standard Institution 3 pages
ASTM C 293 (2016) Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading) Annual Book of ASTM Standards (West Conshohocken PA USA) 4 pages. DOI: 10.1520/C0293_C0293M-16
