Mahdi, Q., Mashkour, M., Mahmoud, I. (2024). Effect of the Magnetic Field and Exhaust Gas Recirculation on the Performance and Emissions of Biodiesel Engine Coated with Nanoceramics. , 42(1), 144-156. doi: 10.30684/etj.2023.140518.1468
Qusai A. Mahdi; Mahmoud A. Mashkour; Ibtihal A. Mahmoud. "Effect of the Magnetic Field and Exhaust Gas Recirculation on the Performance and Emissions of Biodiesel Engine Coated with Nanoceramics". , 42, 1, 2024, 144-156. doi: 10.30684/etj.2023.140518.1468
Mahdi, Q., Mashkour, M., Mahmoud, I. (2024). 'Effect of the Magnetic Field and Exhaust Gas Recirculation on the Performance and Emissions of Biodiesel Engine Coated with Nanoceramics', , 42(1), pp. 144-156. doi: 10.30684/etj.2023.140518.1468
Mahdi, Q., Mashkour, M., Mahmoud, I. Effect of the Magnetic Field and Exhaust Gas Recirculation on the Performance and Emissions of Biodiesel Engine Coated with Nanoceramics. , 2024; 42(1): 144-156. doi: 10.30684/etj.2023.140518.1468

Effect of the Magnetic Field and Exhaust Gas Recirculation on the Performance and Emissions of Biodiesel Engine Coated with Nanoceramics

Engineering and Technology Journal
Article 11, Volume 42, Issue 1, January 2024, Pages 144-156    PDF (1.44 M)
Document Type: Research Paper
DOI: 10.30684/etj.2023.140518.1468
Authors
Qusai A. Mahdi* ; Mahmoud A. Mashkour; Ibtihal A. Mahmoud
Mechanical Engineering Dept., University of Technology-Iraq, Alsina’a street, 10066 Baghdad, Iraq.
Abstract
This study investigates the influence of ceramic coating on diesel engine efficiency through comprehensive analysis. The investigation was conducted on a four-stroke Kirloskar TV1 diesel engine. The study further examined the effects of employing an 8000 Gauss magnetic field and exhaust gas recirculation on engine performance. The surfaces of the head of the cylinder, the piston, and both the inlet and exhaust valves are then covered with nano-ceramic materials. Atmospheric plasma spray-created nanostructured thermal barrier coatings (TBCs). The feeding powder type is 7% Y2O3-ZrO2 with a particle size of less than 100 nm yttria stabilized zirconia (YSZ) nano X (S4007) ceramic surface coating (350 µm). Bond powder (NiCrAlY) Amdry 962, ranging from 56 to 106µm, has been utilized as a metal bonding coat (150 µm). The results show that the temperature of engine exhaust rises after coating, resulting in a decrease in fuel consumption by 14.22 %. The effect of biofuels on the performance of a compression ignition engine running on diesel fuel was examined. The testing findings revealed that brake thermal efficiency (BTE) improved by 20.5%, and brake-specific fuel consumption (BSFC) decreased by 18.1%. When the load goes up from 50 to 100 percent, however, 38.8 percent and fewer CO percent are observed for the B10+10EGR+8000 Gauss and 0.5 mm coated engine. Also, acceptable increases in emissions were observed in CO2 levels. Diesel and the B10+EGR10+8000 Gauss un-treatment engine's NOx emission values rise by 49.15 percent and 45 percent, respectively, after the load goes up 75 percent.

Highlights
  • 10% WCO and 10% EGR with magnetic fields increased LHR C.I. engine brake thermal efficiency by 20%.
  • The combined impact decreased BSFC by 18.1%, increased coated engine exhaust temperature by 25% at 100% load, and lowered CO emissions at higher loads
  • A 0.5 mm ceramic coating on the engine increased diesel engine exhaust gas temperature by 25%.
  • adiabatic engine emits more CO2 at all load levels, with a18.9% increase at 75% of full load .
Keywords
Nano ceramic; Aps; Diesel engine; Waste cooking oil; Performance
References
  1. Dhinesh, Y. Maria Ambrose Raj, C. Kalaiselvanb, R. KrishnaMoorthy, A numerical and experimental assessment of a coated diesel engine powered by high-performance nano biofuel, Energy Convers. Manag., 171 (201) 815–824. https://doi.org/10.1016/j.enconman.2018.06.039
  2. Demirbas, Progress and recent trends in biodiesel fuels, Energy Convers. Manage., 50 (2009) 14-34. https://doi.org/10.1016/j.enconman.2008.09.001
  3. Saravanan, G. Nagarajan, and S. Sampath, Combined effect of injection timing, EGR and injection pressure in NOx control of a stationary diesel engine fuelled with crude rice bran oil methyl ester, Fuel, 104 (2013) 409-416. https://doi.org/10.1016/j.fuel.2012.10.038
  4. Sathyamoorthi, M. Prabhakaran, and S. M. Abraar, Numerical investigation of ceramic coating on piston crown using Finite Element Analysis, Int. J. Sci. Eng. Appl. Sci., 2 (2016) 258-263.
  5. Sathiyagnanam, A., Saravanan, C., and Dhandapani, S., Effect of thermal-barrier coating plus fuel additive for reducing emission from DI diesel engine Proceedings of the World Congress on Engineering 2010 Vol II WCE 2010, June 30 - July 2, 2010, London, U.K.
  6. Shrirao and A. Pawar, Evaluation of performance and emission characteristics of turbocharged diesel engine with mullite as thermal barrier coating, Int. J. Eng. Technol., 3 (2011) 256-262.
  7. Bakthavathsalam, R. I. Gounder, and K. Muniappan, The influence of ceramic-coated piston crown, exhaust gas recirculation, compression ratio and engine load on the performance and emission behavior of kapok oil–diesel blend operated diesel engine in comparison with thermal analysis, Environ. Sci. Pollut. Res., 26 (2019) 24772-24794. https://doi.org/10.1007/s11356-019-05678-x
  8. S. Raut, S. S. Uparwat, and C. Nagarale, Experimental Inspection by using the Effect of Magnetic Field on the Performance of Diesel Engine, Int. Res. J. Eng. Technol., 4 (2017) 2191-2194.
  9. Jain and S. Deshmukh, Experimental investigation of magnetic fuel conditioner (MFC) in IC engine, IOSR J. Eng., 2 (2012) 27-31. https://doi.org/10.9790/3021-02712731
  10. Mohammadi, T. Ishiyama, T. Kakuta, and S.-S. Kee, Fuel injection strategy for clean diesel engine using ethanol blended diesel fuel, Technical paper, (2005) 0148-7191. https://doi.org/10.4271/2005-01-1725
  11. Saravanan, N. M. Kumar, M. Ettappan, R. Dhanagopal, and J. Vishnupriyan, Effect of exhaust gas re-circulation on performance, emission and combustion characteristics of ethanol-fueled diesel engine, Case Stud. Therm. Eng., 20 (2020)100643. https://doi.org/10.1016/j.csite.2020.100643
  12. H. M.Yasin, R. Mamat, A. F. Yusop, D. M. N. D. Idris, T. Yusaf, M. Rasul, et al., Study of a diesel engine performance with exhaust gas recirculation (EGR) system fuelled with palm biodiesel, Energy Procedia, 110 (2017) 26-31. https://doi.org/10.1016/j.egypro.2017.03.100
  13. Mashhadi, A. Ashofteh, A. Amadeh, Thermal Shock Behavior of Mixed Composite Top Coat APS TBCs, Ceramics-Silikáty, 62 (2018) 200-209. https://doi.org/10.13168/cs.2018.0013
  14. A. A.-h. Qasim, M. A. Mashkour, and I. Al-Namie, The Effect of Ceramic Coating on Performance and Emission of Diesel Engine Operated on Diesel Fuel and Biodiesel Blends, J. Eng., 20 (2014) 91-108.
  15. Jumaa and M. A. Mashkour, The Effect of Variable Engine Parameters on Performance and Emissions of DI Diesel Engine Running on Diesel-Biodiesel Blended with Nano Additives, in IOP Conf. Ser.: Mater. Sci. Eng., (2021) 012122. https://doi.org/10.1088/1757-899X/1094/1/012122
  16. Adnan, M. A. Mashkour and I. Mhmood, Combined Impact of EGR Rate and Magnetic Intensity on Performance and Emission of C.I. Engine Operated with Blended Fuel, Int. J. Heat Technol., 40 (2022) 1404-1415. https://doi.org/10.18280/ijht.400607
  17. Saravanan, G. Nagarajan, and S. Sampath, Combined effect of injection timing, EGR and injection pressure in NOx control of a stationary diesel engine fuelled with crude rice bran oil methyl ester, Fuel, 104 (2013) 409-416. https://doi.org/10.1080/14786451.2012.743464
  18. Singh and S. Chauhan, Feasibility of a new non-edible feedstock in diesel engine: investigation of performance, emission and combustion characteristics, J. Mech. Sci. Technol., 31 (2017) 1979-1986.
  19. G. Pereira, C. D. Oliveira, J. L. Oliveira, P. C. P. Oliveira, C. E. Fellows, and O. E. Piamba, Exhaust emissions and electric energy generation in a stationary engine using blends of diesel and soybean biodiesel, Renewable Energy, 32 (2007) 2453- 2460. https://doi.org/10.1016/j.renene.2006.05.007
  20. Gumus, Evaluation of hazelnut kernel oil of Turkish origin as alternative fuel in diesel engines, Renewable Energy, 33 (2008) 2448-2457. https://doi.org/10.1016/j.renene.2008.02.005
  21. Muthusamy, G. Venkadesan, and U. Krishnavel, Experimental investigation of thermal barrier(8YSZ-TiO2-Al2O3) coated piston used in direct injection compression ignition engine, Therm. Sci., 20(2016) 1189-1196. https://doi.org/10.2298/TSCI16S4189M
  22. Karthik, X. G. Xavier, R. Rajasekar, P. G. Bairavan, and S. Dhanseelan, Experimental investigation of performance and emission characteristics of various nano particles with biodiesel blend on di diesel engine, in IOP Conf. Ser.: Mater. Sci. Eng., 197 (2017). https://doi.org/10.1088/1757-899X/197/1/012014
  23. W. Dickey, S. Vinyard, and R. Keribar, The effect of insulated combustion chamber surfaces on direct-injected Diesel engine performance, emissions and combustion, SAE Tech. Pap. 1989. https://doi.org/10.4271/890292
  24. Buyukkaya and M. Cerit, Thermal analysis of a ceramic coating diesel engine piston using 3-D finite element method, Surf. Coat. Technol., 202 (2007)398-402. https://doi.org/10.1016/j.surfcoat.2007.06.006
  25. Yilmaz and A. Atmanli, Experimental assessment of a diesel engine fueled with diesel-biodiesel-1-pentanol blends, Fuel, 191 (2017) 190-197. https://doi.org/10.1016/j.fuel.2016.11.065
Statistics
Article View: 473
PDF Download: 351


Journal Management System. Powered by iJournalPro.com