- All Journals
- Al-Qadisiyah University
- Basrah University
- Kirkuk University
- Mosul University
- The Iraqi Borad for Medical Specialization
- University of Anbar
- University of Technology
- Al Mustafa University
- Al-Zahraa University for Women
- Alnoor University
- Kunooz University
- Misan University
- Ninevah University
- Tikrit University
- University of Al-Hamdaniya
- University of Kerbala
Modification of polyvinyl chloride by organic molecule for the improvement of its thermal stability | ||
| Journal of University of Anbar for Pure Science | ||
| Article 24, Volume 17, Issue 2, December 2023, Pages 172-179 PDF (654.99 K) | ||
| Document Type: Research Paper | ||
| DOI: 10.37652/juaps.2023.181477 | ||
| Authors | ||
| Emad Yousif* 1; Zahraa N. Adnan1; Ahmed A. Ahmed1; Dina Ahmed2; Alaa A Rashad1; Amamer M. Redwan3; Waled Abdo Ahmed4 | ||
| 1Department of Chemistry, College of Science, Al-Nahrain University, Baghdad, 10070, Iraq | ||
| 2Department of Chemical Industries, Institute of Technology-Baghdad, Middle Technical University, Baghdad, Iraq | ||
| 3Department of Chemistry, Faculty of Science, Bani Waleed University, Bani Waleed, Libya | ||
| 4Department of Chemistry, Faculty of Education, Thamar University, Dhamar 87246, Yemen | ||
| Abstract | ||
| Improving the stability of PVC became a task for many research groups to improve its properties and lower plastic pollution. An invented Schiff base was applied as a heat-resistant agent to alter polyvinyl chloride (PVC) behavior under varying temperatures. The efficacy of the Schiff base-treated PVC films in terms of thermal stability was assessed through weight-loss analysis, Fourier transform infrared (FTIR) spectroscopy, an optical microscope, and atomic force microscopy (AFM). The outcomes demonstrated that incorporating the altered PVC extended the polymer's stability duration, consequently lowering its inclination towards degradation. Furthermore, the Schiff base led to a marked decrease in the presence of PVC's conjugated double bonds, consequently reducing weight loss. The enhancement observed can be credited to the Schiff base's strong ability to neutralize HCl and its effectiveness in protecting unstable chlorine atoms within the polymer chains. These alterations, when combined, resulted in a prolonged delay in thermal degradation and alterations in color, affirming the success of the modification method in improving the thermal stability of PVC. | ||
| Keywords | ||
| polyvinyl chloride (PVC); morphology; thermal stability; modification; Schiff base | ||
|
Supplementary Files
|
||
| References | ||
|
[1] . Gopanna, A., Thomas, S.P., & Rajan, K.P. (2021). Effect of hot climate of Saudi Arabia on physical and mechanical properties of single use polypropylene packaging films. Yanbu J. Eng. Sci., 18, 65–75.
[2]. Khalid, M.Y., Arif, Z.U., Noroozi, R., Zolfagharian, A., & Bodaghi, M. (2022). 4D printing of shape memory polymer composites: A review on fabrication techniques, applications, and future perspectives. J. Manuf. Process., 81, 759–797.
[3]. Fu, S., Sun, Z., Huang, P., Li, Y., & Hu, N. (2019). Some basic aspects of polymer nanocomposites: A critical review. Nano Mater. Sci., 1(1), 2–30.
[4]. Gao, Y., Qiu, L., O’Hare, D., & Wang, Q. (2020). Thermal properties and flame-retardant characteristics of layered double hydroxide polymer nanocomposites. In Layered Double Hydroxide Polymer Nanocomposites, 311–345.
[5]. Braun, V.D., Thallnaier, M. (1966). Zum mechanismus der thermischen chlorwassmtoffabspaltung aus polyvinylchlorid. 3. Mitt. Über die lange der poly- € ensequenzen in partiell dehydrohalogenierten poiyvinylchloriden, polyvinylbromiden und vinylchlorid-copolymeren. Makromol. Chem., 99(1966), 59e75. https://doi.org/10.1002/macp.1966.020990106.
[6]. Wakeman, I.B., & Johnson, H.R. (1978). Vinyl chloride formation from the thermal degradation of poly(vinyl chloride). Polym. Eng. Sci., 18(1978), 404e407. https://doi.org/10.1002/pen.760180512.
[7]. Wimberley, J.W., Carel, A.B., & Cabbiness, D.K. (1982). Conoco Inc., automated method for measuring the thermal degradation of polyvinyl chloride. Anal. Lett., 15(1982), 89e100. https://doi.org/10.1080/00032718208064366.
[8]. Risby, T.H., Yergey, J.A., & Scocca, J.J. (1982). Linear programmed thermal degradation mass spectrometry of polystyrene and poly(vinyl chloride). Anal. Chem., 54(1982), 2228e2233. https://doi.org/10.1021/ac00250a022.
[9]. Anders, H., & Zimmermann, H. (1987). A comparison of the thermal degradation behaviours of poly(vinyl acetate), poly(vinyl alcohol) and poly(vinyl chloride). Polym. Degrad. Stabil., 18(1987), 111e122. https://doi.org/10.1016/0141-3910(87)90024-3.
[10]. Lakshmi, S., & Jayakrishnan, A. (1998). Polymer, 39, 151-157.
[11]. Kameda, T., Grause, G., & Yoshioka, T. (2010). Mater. Chem. Phys., 124, 163-167.
[12]. Liu, C., Luo, Y., Zhong, B., Li, S., Guo, B., & Jia, D. (2011). Express Polym. Lett., 5, 591-603.
[13]. Zou, Y., Kizhakkedathu, J., & Brooks, D. (2009). Macromolecules, 42, 3258-3268.
[14]. Milenkovic, J., Hrenovic, J., Goic-Barisic, I., Tomic, M., Djonlagic, J., & Rajic, N. (2014). Biofouling, 30, 965-973.
[15]. Ghoranneviss, M., Shahidi, S., & Wiener, J. (2010). Plasma Sci. Technol., 12, 204-207.
[16]. Haishima, Y., Isama, K., Hasegawa, C., Yuba, T., & Matsuoka, A. (2013). J. Biomed. Mater. Res. A, 101, 2630-2643.
[17]. Kameda, T., Ono, M., Grause, G., Mizoguchi, T., & Yoshioka, T. (2009). Polym. Degrad. Stabil., 94, 107-112.
[18]. Reyes-Labarta, J., Herrero, M., Tiemblo, P., Mijangos, C., & Reinecke, H. (2003). Polymer, 44, 2263-2269.
[19]. Sacristán, J., Reinecke, H., & Mijangos, C. (2000). Polymer, 41, 5577-5582.
[20]. McCoy, C., Cowley, J., Gorman, S., Andrews, G., & Jones, D. (2009). J. Pharm. Pharmacol., 61, 1163-1169.
[21]. Ahmed, D.S., Kadhom, M., Hadi, A.G., Bufaroosha, M., Salih, N., Al-Dahhan, W.H., & Yousif, E. (2021). Tetra Schiff Bases as Polyvinyl Chloride Thermal Stabilizers. Chemistry, 3, 288-295. https://doi.org/10.3390/chemistry3010021.
[22]. Yousif, E., Abdallh, M., Hashim, H., Ahmed, A., Ahmed, D. S., Yusop, R. M., & Ahmed, A. A. (2019). Enhancement of the photo-chemical properties and efficacy of the mixing technique in the preparation of Schiff base-Cu (II)/poly (vinyl chloride) compounds. Emergent Materials, 2, 505-512.
[23].Yousif, E., & Ahmed, D. S. (2019). Poly (vinyl chloride) reinforced Schiff base as an eco-friendly alternative to conventional PVC. SN Applied Sciences, 1(9), 955.
[24]. Sansul, S., Yousif, E., Ahmed, D.S., El-Hiti, G.A., Kariuki, B.M., Hashim, H., & Ahmed, A. (2023). Pendant Modification of Poly(methyl methacrylate) to Enhance Its Stability against Photoirradiation. Polymers, 15, 2989. https://doi.org/10.3390/polym15142989.
[25]. Arraq, R.R., Hadi, A.G., Ahmed, D.S., El-Hiti, G.A., Kariuki, B.M., Husain, A.A., Bufaroosha, M., & Yousif, E. (2023). Enhancement of Photostabilization of Poly(Vinyl Chloride) in the Presence of Tin–Cephalexin Complexes. Polymers, 15, 550. https://doi.org/10.3390/polym15030550.
[26]. Mousa, O.G., El‐Hiti, G.A., Baashen, M.A., Bufaroosha, M., Ahmed, A., Ahmed, A.A., Ahmed, D.S., & Yousif, E. (2021). Synthesis of Carvedilol–Organotin Complexes and Their Effects on Reducing Photodegradation of Poly(Vinyl Chloride). Polymers, 13, 500. https://doi.org/10.3390/polym13040500.
[27]. Ahmed, A., Abdallh, M., Al-Mashhadani, M. H., Ahmed, D. S., Bufaroosha, M., Jawad, A. H., & Yousif, E. (2021). Environmental stability of poly (vinyl chloride) modified by schiff’s base under exposure to UV. Biointerface Research in Applied Chemistry, 11(5), 13465-13473.
[28]. Yaseen, A. A., Yousif, E., Al-Tikrity, E. T., El-Hiti, G. A., Kariuki, B. M., Ahmed, D. S., & Bufaroosha, M. (2021). FTIR, weight, and surface morphology of poly (vinyl chloride) doped with tin complexes containing aromatic and heterocyclic moieties. Polymers, 13(19), 3264.
[29]. Yousif, E., Asaad, N., Ahmed, D. S., Mohammed, S. A., & Jawad, A. H. (2019). A spectral, optical, microscopic study, synthesis and characterization of PVC films containing Schiff base complexes. Baghdad Science Journal, 16(1).
[30]. Majeed, A., Yousif, E., El‐Hiti, G. A., Ahmed, D. S., & Ahmed, A. A. (2020). Stabilization of Poly (vinyl chloride) containing captopril tin complexes against degradation upon exposure to ultraviolet light. Journal of Vinyl and Additive Technology, 26(4), 601-612.
| ||
|
Statistics Article View: 836 PDF Download: 344 |
||
