- All Journals
- Al-Qadisiyah University
- Basrah University
- Kirkuk University
- Mosul University
- The Iraqi Borad for Medical Specialization
- University of Anbar
- University of Technology
- Al Mustafa University
- Al-Zahraa University for Women
- Alnoor University
- Kunooz University
- Misan University
- Ninevah University
- Tikrit University
- University of Al-Hamdaniya
- University of Kerbala
The Effect of Grain Size of Reinforcing Material (Corn Cob) on Some Mechanical Properties of the Composite Material. | ||
| Journal of University of Anbar for Pure Science | ||
| Article 29, Volume 17, Issue 2, December 2023, Pages 203-209 PDF (682.7 K) | ||
| Document Type: Research Paper | ||
| DOI: 10.37652/juaps.2023.181565 | ||
| Authors | ||
| Omar T. Mohammed* ; Waleed B. Salih* | ||
| Department of Physics, College of Education For Pure Science, University of Anbar, Ramadi, Anbar, Iraq; | ||
| Abstract | ||
| Corn cob (CC) is an agricultural waste that can be recycled and used to reinforce unsaturated polyester resin, which can be utilized to produce low-cost structural sections, as well as reduce the risk resulting from the disposing of these wastes by traditional methods, such as landfilling or burning. The purpose of this research is to study the grain size effect of the reinforcing material particles on the mechanical properties of the composite material represented by (hardness, impact resistance, and compressive strength). The experimental work is carried out by preparing a polymeric mixture of unsaturated polyester resin (UPE) reinforced by corn cob particles using two different grain sizes of (53) µm and (710) µm with different volumetric fractions of (0, 5, 10, 20, and 30)%. The manual molding method was used in preparing the molds as follows: The first group consists of a polymeric mixture reinforced with corn cobs with a granular size of (53) µm using the same volumetric ratios mentioned above, while the second group consists of a polymeric mixture reinforced with corn cobs with a granular size of (710) µm using the same volumetric fractions of the first group. The results suggested that the reinforcement of the matrix by these particles led to improving the mechanical properties of the composite material by increasing the reinforcement ratios. | ||
| Keywords | ||
| corn cob; unsaturated polyester; hardness; impact strength; compressive strength | ||
|
Supplementary Files
|
||
| References | ||
|
[1] Fried, J. R. (1999). Polymer Science and Technology, 2nd ed. Applied Publishers, London, 369-375
[2] Ashutosh, D., Anurag, T. and Chaturvedi, M. K. (2010). Plastic Waste and its Recycling. VSRD Technical and Non- Technical Journal; 1(1): 3
[3] Chattopadhyay, S. K., Singh, S., Pramani, K. N., Niyogi, U. K., Khandl, R. K. and Uppaluri, R. (2011). Biodegradability Studies on Natural Fibers Reinforced Polypropylene Composites. Journal of Applied Polymer Science; 121: 2226-2232
[3] Chattopadhyay, S. K., Singh, S., Pramani, K. N., Niyogi, U. K., Khandl, R. K. and Uppaluri, R. (2011). Biodegradability Studies on Natural Fibers Reinforced Polypropylene Composites. Journal of Applied Polymer Science; 121: 2226-2232.
[4] Chitra, J. N. and Vasanthakumari, R. (2012). Studies on Polypropylene Biocomposite With Cornhusk Waste Polypropylene Biocomposite With Cornhusk Waste Polypropylene Biocomposite With Cornhusk Waste, 3(7), 1-3.
[5] Hind, B, A.(2013). Effect of Reinforced by Coconut Fiber Core on The Mechanical Properties for Un-Saturated Polyester Matrix Composite Material, Engineering and Technology Journal , 31(17) , 296-308
[6] Sanjay .M. R , Arpitha. G. R. , Naik. L.L. , Gopalakrishna. K. & Yogesha B. (2016). Applications of Natural Fibers and Its Composites, Scientific Research Publishing Inc , 7(3) , 108-114
[7] Pratheep. V. G, Priyanka. E., Thangavel. S., Gousanal. J., & Antony. P. T. B. (2020). Kavin Kavin, nvestigation and analysis of corn cob, coir pith with wood plastic composites, Materials Today Journal, 45 (3)
[8] SAE International, (2012) Composite Material Handbook: Polymer Matrix Material, (3).
[9] Annual Book of ASTM Standard Test Method for Unnotched Izod Impact Testing of Plastic properties-Durometer Hardness, (2003) . D (2240-03), 1-12.
[10] Annual Book of ISO Standard, (2006) Standard Test Method for Unnotched Izod Impact Tasting of Plastic, ISO (180), 1-2
[11] ASTM D695-15, Standard Test Method Compressive Properties of Rigid plastics. Information on: https://www.astm.org/Standards/D695-15 .
[12] Yaseen. M. T, Al Saadi. M.A., Hussein. I., & Bdaiw.(2020). An Investigation of the Mechanical Properties of PMMA-based Composites Reinforced with PZT Ternary, Nanoparticles NeuroQuantology, 18 (2) 56-61.
[13] Salman. K. Noori. S., Abd-Alamer. A., & Mahmmod. L. (2014). Studying The Mechanical Properties Of Unsaturated Polyesters - B4C System, The Iraqi Journal For Mechanical And Material Engineering, 14 (1), 174-185
[14] Abbas. R. A, (2012). Study What Can be Achieved by the Lack of Flexural Strain Energy of Change for The Efficient Recovery of Novolak of The Elasticity As a Result of Fiber-Reinforcement, Engineering and Technology Journal, 30 (12), 284-301.
[15] M .Bikales, (2015). Encyclopedia of Polymer Science and Engineering, John Wiley, New York, 4
[16] Miritoiu. C.M, Nicolicescu. C., &Dinita A. (2021). A study About Some Mechanical Properties for Composites Reinforced with Corn Cob Powder, Material Plastic, 58 (4), 1-8.
[17] Abdullah MM. Z, Deyaa. B. M.,& Al saraf A. R. (2013). A study of the effect of temperature on some mechanical properties of single hybrid composites, Ibn Al-Haytham Journal of Pure and Applied Sciences, 24 (2), 49-65
[18] Hassan .M. A. S., Sallal. H. A., & Kahlol .K. K., (2013). Effect the Grain Size on the Polymer Matrix Composites Reinforced by Reenia Particles, Al-Khwarizmi Engineering Journal, 9 (2) 94-102. | ||
|
Statistics Article View: 826 PDF Download: 323 |
||
