Mosa, M., Fahem, A., Guthai, A. (2024). Experimental investigation of perforated multi-layered composite armor subjected to ballistic impact. , 17(1), 16-21. doi: 10.30772/qjes.2024.146005.1083
Muhanad Mosa; Ali Fahem; Achyuth Thumbalam Guthai. "Experimental investigation of perforated multi-layered composite armor subjected to ballistic impact". , 17, 1, 2024, 16-21. doi: 10.30772/qjes.2024.146005.1083
Mosa, M., Fahem, A., Guthai, A. (2024). 'Experimental investigation of perforated multi-layered composite armor subjected to ballistic impact', , 17(1), pp. 16-21. doi: 10.30772/qjes.2024.146005.1083
Mosa, M., Fahem, A., Guthai, A. Experimental investigation of perforated multi-layered composite armor subjected to ballistic impact. , 2024; 17(1): 16-21. doi: 10.30772/qjes.2024.146005.1083

Experimental investigation of perforated multi-layered composite armor subjected to ballistic impact

Al-Qadisiyah Journal for Engineering Sciences
Article 3, Volume 17, Issue 1, March 2024, Pages 16-21    PDF (633.06 K)
Document Type: Research Paper
DOI: 10.30772/qjes.2024.146005.1083
Authors
Muhanad Mosa* 1; Ali Fahem1, 2; Achyuth Thumbalam Guthai3
1Department of Mechanical Engineering, Collage of Engineering, University of Al-Qadisiyah, Al-Diwaniyah, Iraq
2School of Materials Science and Engineering, College of Engineering, Architecture and Technology, Oklahoma State University, Tulsa, OK, USA
3School of Mechanical and Aerospace Engineering, College of Engineering, Architecture, and Technology, Oklahoma State University, Stillwater, OK. USA
Abstract
Ballistic protection of vehicles has become an important endeavor, as it is concerned with how occupants can possess a comfortable feeling together with a high level of protection during a shooting incident. In recent years, numerous forms of armor have employed several kinds of distinct materials to produce a new generation of panels to address the crucial issues in the structure of armor, such as how to provide high protection with reduced density combined with further increasing the stacking and bond strength between the layers of the panel. This study attempts to use a different approach represented by engineering design to combine with the high impact resistance and low weight, moreover high bonding between the laminate of structure. The structure of the suggested armor consists of five main layers made of different materials, FRP composite materials, then two perforated layers of steel, followed by one perforated layer of rubber, and finally one layer of aluminum. These layers were tested via 9 mm caliber to specify the ability of each layer to absorb the energy of the projectile and then the configuration of the layers depending on the function of each layer. However, the results offer a significant ballistic performance with reasonably reduced mass and excellent bonding strength between the layers of the structure.
Keywords
Ballistic performance; Perforated armor plates; Armored vehicle; Multi-layer armor; Protection shell
References
  • P. V. Kim, Nickolas Zhang, Geng "Development of a blast event simulation process for multi-scale modelling of composite armour for lightweight vehicles," International Journal of Vehicle Design, vol. 61, no. 1-4, pp. 157-176, 2013. https://doi.org/10.1504/IJVD.2013.050844.
  • Mamivand, Liaghat, Gh H "A model for ballistic impact on multilayer fabric targets," International Journal of Impact Engineering, vol. 37, no. 7, pp. 806-812, 2010. https://doi.org/10.1016/j.ijimpeng.2010.01.003.
  • Lenihan, Ronan, William, O'Donoghue, Padraic E, Leen, Sean B, "A review of the integrity of metallic vehicle armour to projectile attack," Materials: Design and Applications, vol. 233, no. 1, pp. 73-94, 2019. https://doi.org/10.1177/1464420718759704.
  • Messer, K.R., Guthai, A.T., Fahem, A.F., Singh, R.P. (2023). Mixed-Mode Fracture Interactions Along Centrally Cracked Weakened Planes. In: Beese, A., Berke, R.B., Pataky, G., Hutchens, S. (eds) Fracture, Fatigue, Failure and Damage Evolution, Volume 3. SEM 2022. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, Cham. https://doi.org/10.1007/978-3-031-17467-4_8.
  • Nieberle, Kumar, Shiv Ranjan, Patnaik, Amar, Goswami, Chandramani "Composite materials for armour application," Advances in Engineering Design, pp. 239-248, 2021. https://doi.org/10.1007/978-981-33-4018-3_22.
  • M. Nurick, JB J "Deformation of thin plates subjected to impulsive loading—a review: Part i: Theoretical considerations," International Journal of Impact Engineering, vol. 8, no. 2, pp. 159-170, 1989. https://doi.org/10.1016/0734-743X(89)90014-6.
  • J. C. s. Mines, "A one-dimensional stress wave analysis of a lightweight composite armour," Composite Structures, vol. 64, no. 1, pp. 55-62, 2004. https://doi.org/10.1016/S0263-8223(03)00213-7.
  • Fahem, A. Kidane, and M. Sutton, "Loading Rate Effects for Flaws Undergoing Mixed-Mode I/III Fracture," Experimental Mechanics, vol. 61, no. 8, pp. 1291-1307, 2021. https://doi.org/10.1007/s11340-021-00739-0.
  • Yunfei, Z. Wei, Y. Yonggang, and S. Lizhong, "Experimental investigation on the ballistic performance of double-layered plates subjected to impact by projectile of high strength," International Journal of Impact Engineering, vol. 70, pp. 38-49, 2014. https://doi.org/10.1016/j.ijimpeng.2014.03.003.
  • N. Pratomo, Santosa, Sigit Puji, Gunawan, Leonardo, Widagdo, Djarot, Putra, Ichsan Setya "Design optimization and structural integrity simulation of aluminum foam sandwich construction for armored vehicle protection," Composite Structures, vol. 276, p. 114461, 2021. https://doi.org/10.1016/j.compstruct.2021.114461.
  • L. Shen, Guoxing Wang, Zhihua Zhao, Longmao "Experiments on curved sandwich panels under blast loading," International Journal of Impact Engineering, vol. 37, no. 9, pp. 960-970, 2010. https://doi.org/10.1016/j.ijimpeng.2010.03.002.
  • Hazrati, Saeimi Sadigh, Mohammad Ali "Failure simulation in the reinforced V-shape plates subjected to localized blast loading," Journal of Failure Analysis Prevention, vol. 16, pp. 683-693, 2016. https://doi.org/10.1007/s11668-016-0146-6.
  • Zhang, Jin, Fengnian, Zhao, Zheng, Zhou, Zhongxin, Xu, Ying, Chen, Hailong, Fan, Hualin "Hierarchical anisogrid stiffened composite panel subjected to blast loading: Equivalent theory," Composite Structures, vol. 187, pp. 259-268, 2018. https://doi.org/10.1016/j.compstruct.2017.12.059.
  • Zhao, Yang, Zhaohan, Yu, Tianlai, and B. Materials, "Mechanical properties and energy absorption capabilities of aluminium foam sandwich structure subjected to low-velocity impact," Construction, vol. 273, p. 121996, 2021. https://doi.org/10.1016/j.conbuildmat.2020.121996.
  • J. Ramírez-Gil, Silva, Emílio Carlos Nelli, and Design, "Through-thickness perforated steel plates optimized for ballistic impact applications," Materials, vol. 212, p. 110257, 2021. https://doi.org/10.1016/j.matdes.2021.110257.
  • Ehsani, Ahmadi, Abbas, Fadai, Dawud "Modeling of vehicle fuel consumption and carbon dioxide emission in road transport," Renewable, sustainable energy reviews, vol. 53, pp. 1638-1648, 2016. https://doi.org/10.1016/j.rser.2015.08.062.
  • Messer, K., Fahem, A., T. Guthai, A., P. Singh, R. (2022). 'The experimental methods and elastic properties of shale bedding planes materials state-of-the-art review', Al-Qadisiyah Journal for Engineering Sciences, 15(2), pp. 126-130. https://doi.org/10.30772/qjes.v15i2.823
  • Phillips, Kortschot, Mark, Azhari, Fae "Towards standardizing the preparation of test specimens made with material extrusion: Review of current techniques for tensile testing," Additive Manufacturingp. 103050, 2022. https://doi.org/10.1016/j.addma.2022.103050.
  • Balos, Howard, Daniel, Brezulianu, Adrian, Labus Zlatanović, Danka "Perforated plate for ballistic protection—A review," Metals, vol. 11, no. 4, p. 526, 2021. https://doi.org/10.3390/met11040526.
  • Serjouei, R. Chi, Z. Zhang, and I. Sridhar, "Experimental validation of BLV model on bi-layer ceramic-metal armor," International Journal of Impact Engineering vol. 77, pp. 30-41, 2015. https://doi.org/10.1016/j.ijimpeng.2014.11.001.
  • Palta, Fang, Hongbing, Weggel, David C "Finite element analysis of the Advanced Combat Helmet under various ballistic impacts," International Journal of Impact Engineering, vol. 112, pp. 125-143, 2018. https://doi.org/10.1016/j.ijimpeng.2017.10.010.
  • Hadeel A. Alobaidi, Nabeel Almuramady, Mohammad M. Ali, Influence od Adding Epoxy on Fatigue Strength of Natural Rubber, AIP Conference proceeding, 2787, 030008, 2023. https://doi.org/10.1063/5.0148185
  • Nabeel Almuramady, Feodor M. Borodich, Irina G. Goryacheva, Elena V. Torskaya, Damage of functionalized self-assembly monomolecular layers applied to silicon microgear MEMS, Tribology International, Volume 129, 2019, Pages 202-213, ISSN 0301-679X. https://doi.org/10.1016/j.triboint.2018.07.049.
  • Fahem, A.F., Gupta, V., Kidane, A., Sutton, M.A. (2021). Determination of Mixed-Mode (I/III) Fracture of Polycarbonate. In: Xia, S., Beese, A., Berke, R.B. (eds) Fracture, Fatigue, Failure and Damage Evolution , Volume 3. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, Cham. https://doi.org/10.1007/978-3-030-60959-7_13.
  • Arias, J. Rodríguez-Martínez, and A. Rusinek, "Numerical simulations of impact behaviour of thin steel plates subjected to cylindrical, conical and hemispherical non-deformable projectiles," Engineering Fracture Mechanics, vol. 75, no. 6, pp. 1635-1656, 2008. https://doi.org/10.1016/j.engfracmech.2007.06.005.
  • Y. Wu, L.-Y. Li, and C. Thornton, "Energy dissipation during normal impact of elastic and elastic–plastic spheres," International Journal of Impact Engineering, vol. 32, no. 1-4, pp. 593-604, 2005. https://doi.org/10.1016/j.ijimpeng.2005.08.007.
Statistics
Article View: 1,111
PDF Download: 775


Journal Management System. Powered by iJournalPro.com