Salman, A., Mohammed, J., Mohammed, F. (2024). Effect of the material properties of the rotor-disc on the performance of eddy current braking systems. , 42(8), 1061-1067. doi: 10.30684/etj.2024.144221.1625
Ahmed M. Salman; Jamal A.-K. Mohammed; Farag M. Mohammed. "Effect of the material properties of the rotor-disc on the performance of eddy current braking systems". , 42, 8, 2024, 1061-1067. doi: 10.30684/etj.2024.144221.1625
Salman, A., Mohammed, J., Mohammed, F. (2024). 'Effect of the material properties of the rotor-disc on the performance of eddy current braking systems', , 42(8), pp. 1061-1067. doi: 10.30684/etj.2024.144221.1625
Salman, A., Mohammed, J., Mohammed, F. Effect of the material properties of the rotor-disc on the performance of eddy current braking systems. , 2024; 42(8): 1061-1067. doi: 10.30684/etj.2024.144221.1625

Effect of the material properties of the rotor-disc on the performance of eddy current braking systems

Engineering and Technology Journal
Volume 42, Issue 8, August 2024, Pages 1061-1067    PDF (1004.77 K)
Document Type: Research Paper
DOI: 10.30684/etj.2024.144221.1625
Authors
Ahmed M. Salman* ; Jamal A.-K. Mohammed; Farag M. Mohammed
Electromechanical Engineering Dept., University of Technology-Iraq, Alsina’a street, 10066 Baghdad, Iraq.
Abstract
Failure of traditional brakes occurs due to raised temperatures and the formation of structural fractures caused by wear and strain. For resolving mechanical brake problems, consider employing contactless braking technology, also known as eddy current braking, which offers a smoother deceleration. This research aims to assess the suitability of multi-materials for designing brake discs (ECBs) for use in automobiles. The choice of material for the rotor disc is crucial in the design of eddy current brakes. Different material factors impact the performance of these brakes. Therefore, there is a need for a material that possesses superior mechanical properties, high electrical conductivity, and efficient power dissipation capabilities. An extensive analysis was conducted to identify the optimal materials for implementing this technology in lightweight vehicles to achieve maximum braking efficiency and reduce general brake issues. This study assesses the impact of three different non-ferromagnetic materials (copper, aluminum, and steel) on the performance of the ECB system. The operation of the (ECB) is meaningly influenced by material properties such as permeability, electrical Conductivity, and thermal Conductivity. The investigation was carried out by finite element analysis (FEA) simulation. Findings demonstrated that copper is the more conductive material for eddy current braking. Due to its good electrical conductivity, it creates eddy currents, leading to important braking force and efficiency. Moreover, copper exhibits a force of 116.130 N, aluminum shows a force of 104.6 N, and steel showcases a force of 94.25 N, as indicated by the statistics. The percentage increase in braking strength is higher for copper than aluminum and steel, with values of 10.3% and 18.9%, respectively.  

Highlights
  • Non-ferromagnetic rotor disc conductors were investigated for electromagnetic braking efficiency
  • Copper braking force was 12.6% higher than aluminum and 34.6% higher than steel
  • Highest braking torque was 1.30914 Nm for copper, versus 1.12914 Nm aluminum and 0.84914 Nm steel
  • Highly conductive copper significantly improved braking efficiency
  • Copper stopping time was 3.7% and 10% lower than aluminum and steel with higher braking torque
Keywords
Electromagnetic brake; Braking force; Frictionless brake; Characteristics materials Magnetic flux density; Eddy Current Braking (ECB)
References
  1. N. Faisal, F. M. Mohammed, J. A.-K. Mohammed, Design and Implementation of an Electromechanical Brake System, Eng. Tech. J., 40 (2022) 31–39. https://doi.org/10.30684/etj.v40i1.2150
  2. M. Mohammed, J. A.-K. Mohammed, H. N. Faisal, Modeling and Simulation of an Electromechanical Brake System, IOP Conf. Ser.: Mat. Sci. Eng., 1105 (2021) 1–13. https://doi.org/10.1088/1757-899X/1105/1/012051
  3. I. González, Experiments with eddy currents: the eddy current brake, Eur. J. Phys., 25 (2004) 463. https://doi.org/10.1088/0143-0807/25/4/001
  4. Sooyoung, et al., Design and analysis of the eddy current brake with the winding change, J. Magn., 22 (2017) 23–28. https://doi.org/10.4283/JMAG.2017.22.1.023
  5. E. Guy and M. Ehsani, Parametric analysis of eddy-current brake performance by 3-D finite-element analysis, IEEE Trans. Magn., 42 (2006) 319–328. https://doi.org/10.1109/TMAG.2005.860782
  6. M. Jang, S. -S. Jeong, and S. -D. Cha, The application of linear Halbach array to eddy current rail brake system, IEEE Trans. Magn., 37 (2001) 2627–2629. https://doi.org/10.1109/20.951256
  7. Hecquet, et al., A linear eddy current braking system defined by finite element method, IEEE trans. Magn., 35 (1999) 1841–1844. https://doi.org/10.1109/20.767391
  8. Z. Baharom, Electromagnetic Braking System Using Eddy Current for Brake Disc of Al6061 and Al7075, Int. Rev. Mech. Eng., 6 (2012) 588–592.
  9. I. Munyaradzi and R. S. Tomar, Evaluation of Materials Suitable for Use in Eddy Currents Non-Contact Brakes Disc in Automobile Application,  Int. J. Sci. Res., 5 (2016). https://doi.org/10.21275/v5i4.nov163002
  10. Gorjan, M. Boretius, G. Blugan, F. Gili, D. Mangherini, X. Lizarralde, M. Ferraris, T. Graule, A. Igartua, G. Mendoza, J. Kuebler, Ceramic protection plates brazed to aluminum brake discs, Ceram. Int., 42 (2016) 15739–15746. https://doi.org/10.1016/j.ceramint.2016.07.035
  11. A.A. Agbeleye, D.E. Esezobor, S.A. Balogun, J.O. Agunsoye, J. Solis, A. Neville, Tribological properties of aluminum-clay composites for brake disc rotor applications, J. King Saud Univ. Sci., 28 (2017) 21– https://doi.org/10.1016/j.jksus.2017.09.002
  12. Karakoc, E. J. Park, and A. Suleman, Improved braking torque generation capacity of an eddy current brake with time-varying magnetic fields: A numerical study, Finite Elem. Anal. Des., 59 (2012) 66–75. https://doi.org/10.1016/j.finel.2012.05.005
  13. Liao, Overview of Numerical Analysis and Optimization Methods for Eddy Current Retarders, Acad. Sci. Technol., 3 (2022) 6–9. http://dx.doi.org/10.54097/ajst.v3i2.2079
  14. Li, et al. Calculation and Characterization of Braking Performance for Rail Eddy Current Brake With AC Excited Ring-Winding Armature, IEEE Trans. Ind. Appl., 59 (2022) 1614–1625.http://dx.doi.org/10.1109/TIA.2022.3227140
  15. Min-Gyu, et al., Torque analysis and measurements of a permanent magnet type Eddy current brake with a Halbach magnet array based on analytical magnetic field calculations,  J. Appl. Phys., 115 (2014). https://doi.org/10.1063/1.4862523
  16. Cho, H. C. Liu, H. Ahn, J. Lee, and H. W. Lee, Eddy Current Brake with a Two-Layer Structure: Calculation and Characterization of Braking Performance, IEEE Trans. Magn., 53 (2017) .https://doi.org/10.1109/TMAG.2017.2707555
  17. N. Ahamad and S. A. Jumaat, Analysis of Eddy Current Density using ANSYS MAXWELL Software,  J. Electron. Voltage Appl., 1 (2020) 37–45.
  18. K. Srivastava and S. Kumar, An alternative approach for calculation of braking force of an eddy-current brake, IEEE Trans. Magn., 45 (2009) 150–154.https://doi.org/10.1109/TMAG.2008.2006993
  19. H. Wouterse, Critical torque and speed of eddy current brake with widely separated soft iron poles, IEE Proc. B Electr. Power Appl., 138 (1991) 153–158. https://doi.org/10.1049/ip-b.1991.0019
  20. Liu, W. Li, L. Jin, G. Lin, Y. Sun, Z. Zhang, Analysis of linear eddy current brakes for maglev train using an equivalent circuit method, IET Electr. Syst. Transpo., 11 (2021) 218–226. https://doi.org/10.1049/els2.12016
Statistics
Article View: 532
PDF Download: 469


Journal Management System. Powered by iJournalPro.com