Ali, A., Hasan, H., Almabrouk, M. (2024). On the vibration and stability investigations of orthotropic FGMs plate and cylindrical shell: A review. , 15(1), 54-68. doi: 10.37649/aengs.2024.147135.1072
Ahmed Y. Ali; Hamad M. Hasan; Munir Faraj Almabrouk. "On the vibration and stability investigations of orthotropic FGMs plate and cylindrical shell: A review". , 15, 1, 2024, 54-68. doi: 10.37649/aengs.2024.147135.1072
Ali, A., Hasan, H., Almabrouk, M. (2024). 'On the vibration and stability investigations of orthotropic FGMs plate and cylindrical shell: A review', , 15(1), pp. 54-68. doi: 10.37649/aengs.2024.147135.1072
Ali, A., Hasan, H., Almabrouk, M. On the vibration and stability investigations of orthotropic FGMs plate and cylindrical shell: A review. , 2024; 15(1): 54-68. doi: 10.37649/aengs.2024.147135.1072

On the vibration and stability investigations of orthotropic FGMs plate and cylindrical shell: A review

Anbar Journal of Engineering Sciences
Volume 15, Issue 1, May 2024, Pages 54-68    PDF (554.51 K)
Document Type: Review Paper
DOI: 10.37649/aengs.2024.147135.1072
Authors
Ahmed Y. Ali* 1; Hamad M. Hasan1; Munir Faraj Almabrouk2
1Department of Mechanical Engineering of Engineering Faculty / Anbar University
2Mechanical Engineering and composite engineering / University Sultan ZainalAbidin
Abstract
Since FGM orthotropic structures have such striking qualities as high strength, exceptional stiffness, stiffness-to-weight ratio, reduced cost, and high strength-to-weight ratio, they are employed extensively in the mechanical, aerospace, and civil engineering sectors. Thick plates and shells have more noticeable shear deformation effects. Therefore, in recent years, there has been a lot of interest in the vibration and buckling investigation of FGMs orthotropic plates and shells. Moreover, researchers have developed a variety of approaches and procedures for the examination of orthotropic FGM plates and shells. The majority of the literature review in this publication is focused on orthotropic FGMs plate and shell buckling and linear and nonlinear free vibration. In engineering practices, it is customary to use material-oriented or orthotropic materials in several domains to optimize the structures and maximize material properties, which is especially crucial for FG constructions. Solutions for the orthotropic FGM structure are studied analytically and numerically with different plate and shell theories.
Keywords
FGMs orthotroy shell; FGMs orthotroy plates; shear deformable theories; vibration; Buckling
References
  • Gao, W. Gao, D. Wu, and C. Song, “Nonlinear dynamic buckling of the imperfect orthotropic E-FGM circular cylindrical shells subjected to the longitudinal constant velocity,” Int J Mech Sci, vol. 138–139, pp. 199–209, Apr. 2018, doi: 10.1016/j.ijmecsci.2018.02.013.
  • N. Reddy, “Mechanics of Laminated Composite Plates and Shells : Theory and Analysis, Second Edition,” Mechanics of Laminated Composite Plates and Shells, Nov. 2003, doi: 10.1201/B12409.
  • H. Toorani and A. A. Lakis, “Large amplitude vibrations of anisotropic cylindrical shells,” Comput Struct, vol. 82, no. 23–26, pp. 2015–2025, Sep. 2004, doi: 10.1016/J.COMPSTRUC.2003.07.007.
  • Gao, W. Gao, D. Wu, and C. Song, “Nonlinear dynamic stability of the orthotropic functionally graded cylindrical shell surrounded by Winkler-Pasternak elastic foundation subjected to a linearly increasing load,” J Sound Vib, vol. 415, pp. 147–168, Feb. 2018, doi: 10.1016/j.jsv.2017.11.038.
  • Ozturk and F. Erdogan, “Mode I crack problem in an inhomogeneous orthotropic medium,” Int J Eng Sci, vol. 35, no. 9, pp. 869–883, Jul. 1997, doi: 10.1016/S0020-7225(97)80005-5.
  • Ozturk and F. Erdogan, “The mixed mode crack problem in an inhomogeneous orthotropic medium,” Int J Fract, vol. 98, no. 3–4, pp. 243–261, 1999, doi: 10.1023/A:1018352203721.
  • A. Kaysser and B. llschner, “FGM Research Activities in Europe,” MRS Bull, vol. 20, no. 1, pp. 22–26, 1995, doi: 10.1557/S0883769400048879.
  • Sampath, H. Herman, N. Shimoda, and T. Saito, “Thermal Spray Processing of FGMs,” MRS Bull, vol. 20, no. 1, pp. 27–31, 1995, doi: 10.1557/S0883769400048880.
  • Soedel, “Simplified equations and solutions for the vibration of orthotropic cylindrical shells,” J Sound Vib, vol. 87, no. 4, pp. 555–566, Apr. 1983, doi: 10.1016/0022-460X(83)90506-0.
  • A. Lakis, A. Selmane, and A. Toledano, “Non-linear free vibration analysis of laminated orthotropic cylindrical shells,” Int J Mech Sci, vol. 40, no. 1, pp. 27–49, Jan. 1998, doi: 10.1016/S0020-7403(97)00029-5.
  • Ganesan and K. R. Sivadas, “Vibration analysis of orthotropic shells with variable thickness,” Comput Struct, vol. 35, no. 3, pp. 239–248, Jan. 1990, doi: 10.1016/0045-7949(90)90343-Z.
  • H. Ip, W. K. Chan, P. C. Tse, and T. C. Lai, “Vibration analysis of orthotropic thin cylindrical shells with free ends by the rayleigh-ritz method,” J Sound Vib, vol. 195, no. 1, pp. 117–135, Aug. 1996, doi: 10.1006/JSVI.1996.0407.
  • Q. Chen, Z. G. Bian, and H. J. Ding, “Three-dimensional vibration analysis of fluid-filled orthotropic FGM cylindrical shells,” Int J Mech Sci, vol. 46, no. 1, pp. 159–171, Jan. 2004, doi: 10.1016/J.IJMECSCI.2003.12.005.
  • S. Vel, “Exact elasticity solution for the vibration of functionally graded anisotropic cylindrical shells,” Compos Struct, vol. 92, no. 11, pp. 2712–2727, Oct. 2010, doi: 10.1016/J.COMPSTRUCT.2010.03.012.
  • Zhang, J. Yang, and Y. Hao, “Chaotic vibrations of an orthotropic FGM rectangular plate based on third-order shear deformation theory,” Nonlinear Dyn, vol. 59, no. 4, pp. 619–660, Mar. 2010, doi: 10.1007/S11071-009-9568-Y/METRICS.
  • H. Sofiyev, H. M. Halilov, and N. Kuruoglu, “Analytical solution of the dynamic behavior of non-homogenous orthotropic cylindrical shells on elastic foundations under moving loads,” J Eng Math, vol. 69, no. 4, pp. 359–371, Apr. 2011, doi: 10.1007/S10665-010-9392-X/METRICS.
  • Liu, Y. F. Xing, M. S. Qatu, and A. J. M. Ferreira, “Exact characteristic equations for free vibrations of thin orthotropic circular cylindrical shells,” Compos Struct, vol. 94, no. 2, pp. 484–493, Jan. 2012, doi: 10.1016/J.COMPSTRUCT.2011.08.012.
  • H. Sofiyev and N. Kuruoglu, “Buckling and vibration of shear deformable functionally graded orthotropic cylindrical shells under external pressures,” Thin-Walled Structures, vol. 78, pp. 121–130, May 2014, doi: 10.1016/J.TWS.2014.01.009.
  • M. Najafov, A. H. Sofiyev, and N. Kuruoglu, “Vibration analysis of nonhomogeneous orthotropic cylindrical shells including combined effect of shear deformation and rotary inertia,” Meccanica, vol. 49, no. 10, pp. 2491–2502, Jul. 2014, doi: 10.1007/S11012-014-9989-7/METRICS.
  • H. Sofiyev and N. Kuruoglu, “Combined effects of transverse shear stresses and nonlinear elastic foundations on the nonlinear dynamic response of heterogeneous orthotropic cylindrical shells,” Compos Struct, vol. 166, pp. 153–162, Apr. 2017, doi: 10.1016/J.COMPSTRUCT.2017.01.058.
  • Bacciocchi and A. M. Tarantino, “Natural frequency analysis of functionally graded orthotropic cross-ply plates based on the finite element method,” Mathematical and Computational Applications 2019, Vol. 24, Page 52, vol. 24, no. 2, p. 52, May 2019, doi: 10.3390/MCA24020052.
  • H. Sofiyev, “Large amplitude vibration of FGM orthotropic cylindrical shells interacting with the nonlinear Winkler elastic foundation,” Compos B Eng, vol. 98, pp. 141–150, Aug. 2016, doi: 10.1016/J.COMPOSITESB.2016.05.018.
  • V. Joshi, N. K. Jain, and G. D. Ramtekkar, “Analytical modeling for vibration analysis of thin rectangular orthotropic/functionally graded plates with an internal crack,” J Sound Vib, vol. 344, pp. 377–398, May 2015, doi: 10.1016/J.JSV.2015.01.026.
  • H. Sofiyev, Z. Karaca, and Z. Zerin, “Non-linear vibration of composite orthotropic cylindrical shells on the non-linear elastic foundations within the shear deformation theory,” Compos Struct, vol. 159, pp. 53–62, Jan. 2017, doi: 10.1016/J.COMPSTRUCT.2016.09.048.
  • H. Sofiyev et al., “The nonlinear vibration of orthotropic functionally graded cylindrical shells surrounded by an elastic foundation within first order shear deformation theory,” Compos B Eng, vol. 116, pp. 170–185, May 2017, doi: 10.1016/J.COMPOSITESB.2017.02.006.
  • H. Sofiyev, “Nonlinear free vibration of shear deformable orthotropic functionally graded cylindrical shells,” Compos Struct, vol. 142, pp. 35–44, May 2016, doi: 10.1016/J.COMPSTRUCT.2016.01.066.
  • Yang and D. He, “Vibration and buckling of orthotropic functionally graded micro-plates on the basis of a re-modified couple stress theory,” Results Phys, vol. 7, pp. 3778–3787, Jan. 2017, doi: 10.1016/J.RINP.2017.09.026.
  • C. Haciyev, A. H. Sofiyev, and N. Kuruoglu, “Free bending vibration analysis of thin bidirectionally exponentially graded orthotropic rectangular plates resting on two-parameter elastic foundations,” Compos Struct, vol. 184, pp. 372–377, Jan. 2018, doi: 10.1016/j.compstruct.2017.10.014.
  • Ghashochi-Bargh and S. Razavi, “A simple analytical model for free vibration of orthotropic and functionally graded rectangular plates,” Alexandria Engineering Journal, vol. 57, no. 2, pp. 595–607, Jun. 2018, doi: 10.1016/J.AEJ.2017.02.005.
  • Fu, J. Yao, Z. Wan, and G. Zhao, “Free vibration analysis of moderately thick orthotropic functionally graded plates with general boundary restraints,” Materials 2018, Vol. 11, Page 273, vol. 11, no. 2, p. 273, Feb. 2018, doi: 10.3390/MA11020273.
  • Huang, Y. Zhao, and D. Cao, “Bending and free vibration analysis of orthotropic in-plane functionally graded plates using a Chebyshev spectral approach,” Compos Struct, vol. 255, p. 112938, Jan. 2021, doi: 10.1016/J.COMPSTRUCT.2020.112938.
  • K. Jain, S. Soni, and R. Prajapati, “Analytical treatment for vibration analysis of partially cracked orthotropic and FGM submerged cylindrical shell with consideration of fluid-structure interaction,” Mechanics Based Design of Structures and Machines, vol. 49, no. 4, pp. 463–486, 2021, doi: 10.1080/15397734.2019.1689140.
  • Sourki, R. T. Faal, and A. S. Milani, “Vibration analysis of orthotropic functionally graded composite plates in thermal environment using high-order shear deformation theory: frequency suppression by tuning the in-plane forces,” Int J Appl Comput Math, vol. 6, no. 3, pp. 1–27, Jun. 2020, doi: 10.1007/S40819-020-00806-5/METRICS.
  • Y. Ali and H. M. Hasan, “Non-linear large amplitude vibration of orthotropic FGM convex and concave toroidal shell segments including the damping effect using the shear deformation theory,” Thin-Walled Structures, vol. 173, p. 109035, Apr. 2022.
  • L. Pelletier and S. S. Vel, “An exact solution for the steady-state thermoelastic response of functionally graded orthotropic cylindrical shells,” Int J Solids Struct, vol. 43, no. 5, pp. 1131–1158, Mar. 2006.
  • Wang and L. J. Sudak, “Three-dimensional analysis of multi-layered functionally graded anisotropic cylindrical panel under thermomechanical loading,” Mechanics of Materials, vol. 40, no. 4–5, pp. 235–254, Apr. 2008, doi: 10.1016/J.MECHMAT.2007.06.008.
  • Asemi and M. Shariyat, “Highly accurate nonlinear three-dimensional finite element elasticity approach for biaxial buckling of rectangular anisotropic FGM plates with general orthotropy directions,” Compos Struct, vol. 106, pp. 235–249, Dec. 2013, doi: 10.1016/J.COMPSTRUCT.2013.06.006.
  • M. Najafov, A. H. Sofiyev, and N. Kuruoglu, “Torsional vibration and stability of functionally graded orthotropic cylindrical shells on elastic foundations,” Meccanica, vol. 48, no. 4, pp. 829–840, May 2013, doi: 10.1007/S11012-012-9636-0/METRICS.
  • Shariyat and K. Asemi, “Three-dimensional non-linear elasticity-based 3D cubic B-spline finite element shear buckling analysis of rectangular orthotropic FGM plates surrounded by elastic foundations,” Compos B Eng, vol. 56, pp. 934–947, Jan. 2014.
  • H. Sofiyev, A. Deniz, Z. Mecitoglu, P. Ozyigit, and M. Pinarlik, “Buckling of shear deformable functionally graded orthotropic cylindrical shells under a lateral pressure,” Acta Phys Pol A, vol. 127, no. 4, pp. 907–909, Apr. 2015, doi: 10.12693/APHYSPOLA.127.907.
  • Asnafi and M. Abedi, “A comparison between the dynamic stability of three types of nonlinear orthotropic functionally graded plates under random lateral loads,” https://doi.org/10.1177/1077546315617857, vol. 23, no. 15, pp. 2520–2537, Nov. 2015.
  • H. Mansouri and M. Shariyat, “Biaxial thermo-mechanical buckling of orthotropic auxetic FGM plates with temperature and moisture dependent material properties on elastic foundations,” Compos B Eng, vol. 83, pp. 88–104, Dec. 2015, doi: 10.1016/J.COMPOSITESB.2015.08.030.
  • Abedi and A. Asnafi, “To reduce the instability region in the nonlinear transverse vibration of randomly excited plates using orthotropic P-FG material,” Nonlinear Dyn, vol. 80, no. 3, pp. 1413–1430, May 2015, doi: 10.1007/S11071-015-1952-1/METRICS.
  • Abedi and A. Asnafi, “Instability and bifurcation behavior of orthotropic S-FGM plates under lateral stochastic loads considering variation of material properties,” https://doi.org/10.1142/S0219455414501089, vol. 16, no. 3, Mar. 2016.
  • H. Mansouri and M. Shariyat, “Differential quadrature thermal buckling analysis of general quadrilateral orthotropic auxetic FGM plates on elastic foundations,” Thin-Walled Structures, vol. 112, pp. 194–207, Mar. 2017, doi: 10.1016/J.TWS.2016.12.018.
  • Gao, W. Gao, D. Wu, and C. Song, “Nonlinear dynamic characteristics and stability of composite orthotropic plate on elastic foundation under thermal environment,” Compos Struct, vol. 168, pp. 619–632, May 2017.
  • Bhaskar and A. Ravindran, “Elasticity solution for orthotropic FGM plates with dissimilar stiffness coefficient variations,” Acta Mech, vol. 230, no. 3, pp. 979–992, Mar. 2019.
  • Y. Ali and H. M. Hasan, “Nonlinear dynamic stability of an imperfect shear deformable orthotropic functionally graded material toroidal shell segments under the longitudinal constant velocity,” https://doi.org/10.1177/0954406219867991, vol. 233, no. 19–20, pp. 6827–6850, Aug. 2019, doi: 10.1177/0954406219867991.
  • Bacciocchi, “Buckling analysis of three-phase CNT/polymer/fiber functionally graded orthotropic plates: Influence of the non-uniform distribution of the oriented fibers on the critical load,” Eng Struct, vol. 223, p. 111176, Nov. 2020.
  • Singh, S. Naskar, P. Kumari, and T. Mukhopadhyay, “Viscoelastic free vibration analysis of in-plane functionally graded orthotropic plates integrated with piezoelectric sensors: Time-dependent 3D analytical solutions,” Mech Syst Signal Process, vol. 184, p. 109636, Feb. 2023, doi: 10.1016/J.YMSSP.2022.109636.
Statistics
Article View: 1,478
PDF Download: 71


Journal Management System. Powered by iJournalPro.com