Performance Enhancement of Electronic Chipset by the Successive Cooling System

S. W. P. N. A. Siricharoenpanich, "Study on the thermal dissipation performance of GPU cooling system with nanofluid as coolant," Case Studies in Thermal Engineering, vol. 25, no. 2, pp. 1-10, February 2021,  https://doi.org/10.1016/j.csite.2021.100904.

[2]

C. L. a. H. Yu, "Experimental Investigations on Heat Transfer Characteristics of Direct Contact Liquid Cooling for CPU," buildings, vol. 12, no. 6, pp. 1-16, June 2022, https://doi.org/10.3390/buildings12070913

[3]

N. A. C. S. Muhammad Arif Harun and, "A Review on Development of Liquid Cooling System for Central Processing Unit (CPU)," Journal of Advanced Research in Fluid, vol. 78, no. 2, pp. 98-113, 2021, https://doi.org/10.37934/arfmts.78.2.98113.

[4]

N. S. S. G. I. T. C.A. Gould, "Thermoelectric cooling of microelectronic circuits and waste heat electrical power generation in a desktop personal computer," Materials Science and Engineering B, vol. B 176, no. 9, p. 316–325, September 2011, doi:10.1016/j.mseb.2010.09.010.

[5]

L. G. A. ,. S. W. Nizar Ahammed, "Thermoelectric cooling of electronic devices with nanofluid in a multiport minichannel heat exchanger," Experimental Thermal and Fluid Science, vol. 74, no. 12, pp. 81-90, December, 2016,  http://dx.doi.org/10.1016/j.expthermflusci.2015.11.023.

[6]

y. a. X. M. S. B. Riffatn, "Improving the coefficient of performance of thermoelectric cooling systems: a review," NTERNATIONAL JOURNAL OF ENERGY RESEARCH, vol. 28, no. 9, p. 753–768, June 2004,  DOI: 10.1002/er.991.

[7]

G. T. Dongliang Zhao, "A review of thermoelectric cooling: Materials, modeling and applications," Applied Thermal Engineering, vol. 66, no. 2, p. 15e24, February 2014, http://dx.doi.org/10.1016/j.applthermaleng.2014.01.074.

[8]

A. D. A. M. J. H. H. K. E. David Martínez-Maradiaga, "Design and testing of topology optimized heat sinks for a tablet," International Journal of Heat and Mass Transfer, vol. 142, no. July, pp. 1-12, 2019,  .

[9]

S. W. A. S. P. N. A. Siricharoenpanich, "Thermal management system of CPU cooling with a novel short heat pipe cooling system," Case Studies in Thermal Engineering, vol. 15, no. 10, pp. 1-8, October 2019, https://doi.org/10.1016/j.csite.2019.100545.

[10]

W. L. W. D. L. Q. &. C. Z. G. Sun, "Advances in Thermoelectric Devices for Localized," Elsevier B.V., vol. 450, no. 4, pp. 1-50, 2022,

[11]

K.-L. L. ,. C. T. ,. Y. K. ,. R. K. Cho-Ning Huang, "Computational fluid dynamics model for a variable conductance thermosyphon," Case Studies in Thermal Engineering, vol. 25, no. 3, pp. 1-17, March 2021, https://doi.org/10.1016/j.csite.2021.100960.

[12]

H.-H. W. C.-C. C. S.-L. C. Te-En Tsai, "Two-phase closed thermosyphon vapor-chamber system for electronic cooling," International Communications in Heat and Mass Transfer, vol. 37, no. 2, pp. 484-489, February 2010.

[13]

J.-C. Wang, "Superposition method to investigate the thermal performance of heat sink with embedded heat pipes," International Communications in Heat and Mass Transfer, vol. 36, no. 5, p. 686–692, May 2009, doi:10.1016/j.icheatmasstransfer.2009.04.008.

[14]

H.-S. H. S.-L. C. Jung-Chang Wang, "Experimental investigations of thermal resistance of a heat sink with horizontal embedded heat pipes," International Communications in Heat and Mass Transfer, vol. 34, no. 5, p. 958–970, may 2007,  doi:10.1016/j.icheatmasstransfer.2007.03.015.

[15]

D. W. G. P. Ji Li, "Experimental studies on a high performance compact loop heat pipe with a square flat evaporator," Applied Thermal Engineering, vol. 30, no. 12, p. 741–752, December 2010, doi:10.1016/j.applthermaleng.2009.12.004.

[16]

D. M. J. C. Sukhvinder Kang, "CLOSED LOOP LIQUID COOLING FOR HIGH PERFORMANCE COMPUTER SYSTEMS," in Proceedings of IPACK2007, ASME InterPACK '07, July 8-12, 2007, Vancouver, British Columbia, CANADA, 2007.

[17]

R. Andrzejczyk, "Experimental Investigation of the Thermal Performance of a Wickless Heat Pipe Operating with Different Fluids: Water, Ethanol, and SES36. Analysis of Influences of Instability Processes at Working Operation Parameters," MDPI-energies, vol. 80, no. 12, pp. 1-28, December 2019, doi:10.3390/en12010080.

[18]

S. W. S. W. P. Naphon, "Application of two-phase vapor chamber technique for hard disk drive cooling of PCs," vol. 40, no. 10, pp. 32-35, October 2013.

[19]

Q. Z. S. Z. F. M. L. L. Sheng Du, "Simulation analysis on energy consumption and economy of CPU cooling system based on loop heat pipe for data center," Thermal Science and Engineering Progress, vol. 45, no. 9, pp. 1-15, September 2023.

[20]

S. C. R. Rachedi, "Enhancement of electronic cooling by insertion of foam material," Heat and Mass Transfer , vol. 37, no. 7, pp. 371-378, 2001.

[21]

E. A. G. Suwat Trutassanawin, "Numerical Analysis of a Miniature-Scale Refrigeration System (MSRS) for Electronics Cooling," in International Refrigeration and Air Conditioning, Purdue e-Pubs, 2004.

[22]

T. T. S. T. S. H. Takayuki Atarashi, "Calculation Method for Forced-Air Convection Cooling Heat Transfer Coefficient of Multiple Rows of Memory Cards," Journal of Electronics Cooling and Thermal Control, vol. 4, no. 9, pp. 70-77, 2014.

[23]

H. M. A. M. M. J. W. P. C. L. M. A. Muhammad Aamer Hayat, "Phase change material/heat pipe and Copper foam-based heat sinks for thermal management of electronic systems," Journal of Energy Storage, vol. 32, no. 10, pp. 1-11, October 2020, https://doi.org/10.1016/j.est.2020.101971.

[24]

R. J. G. B. A. R. F.M. Naduvilakath-Mohammed, "Closed loop liquid cooling of high-powered CPUs: A case study on cooling performance and energy optimization," Case Studies in Thermal Engineering, vol. 50, no. 9, pp. 1-15, 2023, https://doi.org/10.1016/j.csite.2023.103472,

[25]

M. A. E. B. A. T. M. P.-F. M. S. Elnaz Etminan, "On the performance of an innovative electronic chipset thermal management module based on energy storage unit concept utilizing nano-additive phase change material (NPCM)," Journal of Energy Storage, vol. 50, no. 2, pp. 1-13, February 2022.

[26]

P. S. K. Domke, "Peltier modules in cooling systems for electronic components," Advanced Computational Methods and Experiments in Heat Transfer XI, 2010, doi:10.2495/HT100011.

[27]

Y. A. Cengel, Heat and Mass Transfer A Practical Approach, Tata McGraw Hill, 2007.

[28]

A. Fakheri, "Heat Exchanger Efficiency," Transactions of the ASME, vol. 129, no. 9, pp. 1268-1276, SEPTEMBER 2007.

[29]

A. Çağlar, "Optimization of operational conditions for a thermoelectric refrigerator and its performance analysis at optimum conditions," international Journal of Refrigeration, vol. 96, no. 12, pp. 70-77, 2018.

[30]

A. M. R. P. Maciel, "Development and Control of a condensation system using Peltier Cells," M.S. thesis, Electrical and Computer Engineering, TECNICO,LISBOA,  2014.

[31]

C. M. Jaworski, "OPPORTUNITES FOR THERMOELECTRIC ENERGY CONVERSION IN HYBRID VEHICLES," Department of Mechanical Engineering The Ohio State University , Ohio State, 2007.

[32]

MeLCOR, Thermoelectric Handbook, The Standard in Thermoelectrics, Trenton, USA: melcor.

[33]

E. S. Jeong, "A new approach to optimize thermoelectric cooling modules," Cryogenics, vol. 59, no. 12, pp. 38-43, December 2014.

[34]

J. Mao, G. Chen   and Z. Ren , "Thermoelectric cooling materials", Nature material, Prespective, 09 December 2020.

[35]

N. Korprasertsak , T. Leephakpreeda, " Maximizing cooling/heating performance of thermoelectric modules across variable thermal loads via optimal control based on COP curves", Heliyon, vol.10, no.1, pp. 1-11, January,2024,

[36]

Specification of Thermoelectric Module TEC1-12706," High Performance and Highly Reliable Solution for Cooling and Heating Applications", Web Site: www.thermonamic.com.cn