Saud, M., Alrawe, M. (2025). Evaluation of Polyphase and Multi Winding Induction Machine: A Review. , 30(1), 52-70. doi: 10.33899/rengj.2023.142359.1275
mohammed Hamed Saud; Mohammed Ali A. Alrawe. "Evaluation of Polyphase and Multi Winding Induction Machine: A Review". , 30, 1, 2025, 52-70. doi: 10.33899/rengj.2023.142359.1275
Saud, M., Alrawe, M. (2025). 'Evaluation of Polyphase and Multi Winding Induction Machine: A Review', , 30(1), pp. 52-70. doi: 10.33899/rengj.2023.142359.1275
Saud, M., Alrawe, M. Evaluation of Polyphase and Multi Winding Induction Machine: A Review. , 2025; 30(1): 52-70. doi: 10.33899/rengj.2023.142359.1275

Evaluation of Polyphase and Multi Winding Induction Machine: A Review

Al-Rafidain Engineering Journal (AREJ)
Volume 30, Issue 1, March 2025, Pages 52-70    PDF (1.2 M)
Document Type: Review Paper
DOI: 10.33899/rengj.2023.142359.1275
Authors
mohammed Hamed Saud* 1; Mohammed Ali A. Alrawe2
1Electrical Engineering Departement, College of Engineering, University of Mosul, Mosul, Iraq
2Electrical Engineering Department, Collage of Engineering, University of Mosul , Mosul, Iraq
Abstract
The Dual Stator Windings Induction Motor (DSWIM) is an innovative motor technology that become increasingly popular in recent years. The major advantages are the ability to operate at a higher power density, more efficient operation, higher output power, and improved mechanical torque. This article presents a study on multi winding induction machine whether it is a dual stator, a twin stator, or a multi-phase induction machine regarding improved design, analysis, modeling, simulation, and testing prototype. DSWIM design requires only modification to the frame design of a single stator machine. Unlike the twin stator model which is more complex manufacturing, complicated assembly processes, and increased overall cost of the machine.Finite Element Analysis (FEA), vector control, and equivalent circuit analysis, techniques are used to analyze and simulate DSWIM under various operating conditions and to optimize the machine design for specific applications.The optimal phase shift angle between the two stator windings of DSWIM is 30° and it relies on a number of variables, including the machine's design, operating environment, and its intended use.
Keywords
DSWIM; Twin Stator; Power and control Windings; FEA; multi-phase; DWIG
Supplementary Files
References
  1. M. A. Frikha, J. Croonen, K. Deepak, Y. Benômar, M. El Baghdadi, and O. Hegazy, “Multiphase Motors and Drive Systems for Electric Vehicle Powertrains State of the Art Analysis and Future Trends”, Energies, 2023, Vol.16, no.2, 768, doi: 10.3390/en16020768
  2. H. Dewi, F. H. Jufri, and C. Hudaya, “Techno-Economic Analysis of Slip Ring Motor Replaced by Standard Squirrel Cage Induction Motor with VSD,” vol. 1402, Issuepp. 1–6, 2019, doi: 10.1088/1742-6596/1402/3/033107
  3. H. Guermit, K. Kouzi, and S. A. Bessedik, “Novel Design of an Optimized Synergetic Control for Dual Stator Induction Motor,” vol. 38, no. 6, pp. 1828–1845, 2019, doi: https://doi.org/10.1108/COMPEL-01-2019-0042
  4. W. Cai, X. Wu, M. Zhou, Y. Liang, And Y. Wang, “Review and Development of Electric Motor Systems and Electric Powertrains for New Energy Vehicles,” Automotive Innovation, Vol. 4, No. 1, Pp. 3–22, 2021, doi: 10.1007/s42154-021-00139-z
  5. M. Bagheri, E. Farjah, T. Ghanbari, “Selective Utilized Phase Number of Multiphase Induction Motors Strategy to Enhance Electric Vehicles Drive Range,” 12th Power Electronics, Drive Systems, and Technologies Conference (PEDSTC), IEEE, 2021, , doi: 10.1109/PEDSTC52094.2021.9405866.
  6. P. L. Alger, E. H. Freiburghouse, and D. D. Chase, “Double Windings for Turbine Alternators,” Trans. Am. Inst. Electr. Eng., vol. 49, no. 1, pp. 226–244, 1930, doi: 10.1109/T-AIEE.1930.5055483.
  7. S. S. Sivaraju, V. Chandrasekaran, “Optimum Design of Multiple Winding Induction Motor,” Journal of Theoretical and Applied Information Technology, Vol. 65 No.2, pp. 467- 479 2014.
  8.  L. J. Hunt, “the cascade induction motor,” Journal of Institute of Electrical Engineers, vol. 52, Issue 230, pp. 406 – 426, 1914, doi: 10.1049/jiee-1.1914.0031
  9. O. I. Olubamiwa, N. Gule, “A Review of the Advancements in the Design of Brushless Doubly Fed Machines,” Energies 2022, Vol. 15, Issue: 3, pp. 725, , doi: 10.3390/en15030725
  10. M. Y. Metwly, A. S. Abdel-Khalik, M. S. Hamad, S. Ahmed, and N. A. Elmalhy, “Multiphase Stator Winding: New Perspectives, Advanced Topologies, and Futuristic Applications,” IEEE, vol. 10, pp. 103241-103263, 2022 doi: https://doi.org/10.1109/access.2022.3209372
  11. F. Aymen, N. Mohamed, And S. Chayma, “An Improved Direct Torque Control Topology of a Double Stator Machine Using the Fuzzy Logic Controller,” Ieee Access, Vol. 9, Pp. 126400–126413, 2021, doi: https://doi.org/10.1109/ACCESS.2021.3110477
  12. Z. Wu and O. Ojo, “Modeling of A Dual Stator Winding Induction Machine Including the Effect of Main Flux Linkage Magnetic Saturation,” IEEE Transactions on Energy Conversion, Vol. 00, No. C, Pp. 465–472, 2006, doi: 10.1109/TIA.2008.926058
  13. Y. M. Oruma, L. U. Anih, Dr. J. C. Onuegbu, “Steady-State Performance of Dual Stator Winding Polyphase Induction Motor with Reactive Power Compensation”, IRE Journals, Vol. 3 Issue 8, pp. 139-146, 2020.
  14. D. F. De Souza, F. Ant, M. Salotti, I. Lu, And H. Tatizawa, “A Performance Evaluation Of Three-Phase Induction Electric,” Energies, Vol. 15, Issue 6, pp. 1–31, 2022. doi.org/10.3390/en15062002.
  15. I. Subotic, O. Dordevic, J. B. Gomm, And E. Levi, “Active and Reactive Power Sharing Between Three-Phase Winding Sets of a Multiphase Induction Machine,” Ieee Trans. Energy Convers., Vol. 34, No. 3, Pp. 1401–1410, 2019.
  16.  M. A. Khlifi, “Behavior of A Dual Stator Induction Machine Fed by Neutral Point Clamped Multilevel Inverter,” Hindawi, Journal of Energy, Vol. 2018, Article ID 6968023, 2018, doi: https://doi.org/10.1155/2018/6968023
  17. H. Liu, F. Bu, W. Huang, L. Liu, Y. Hu, M. Degnano, and C. Gerada, “Control Strategy for Five-Phase Dual-Stator Winding Induction Starter / Generator System”. IEEE Transactions on Industrial Electronics, Volume: 67, Issue: 4, pp. 2607-2617, 2020) , doi: 10.1109/TIE.2019.2912767
  18. A. Soman, R. Holmukhe, And D. G. Bharadwaj, “Multispeed Operation and Testing of Dual Stator Winding Induction Machine,” international journal of scientific & technology research, Vol. 9, No. 01, pp. 3025–3028, 2020.
  19. L. N. Tutelea, S. I. Deaconu, I. Boldea, And N. Budi, “Design, Control and 2d-Fem Validation for An Double Stator Winding Induction Generator,” 39th Annual Conference of the IEEE Industrial Electronics Society, pp. 2732–2737, 2013, doi: 10.1109/IECON.2013.6699563
  20. M. A. Khlifi, “Advances and Steady-State Development of Dual Stator-Winding Induction,” IETE J. Res., Vol. 0, No. 0, pp. 2934-2940, 2020, doi: https://doi.org/10.1080/03772063.2020.1733443
  21. S. Basak, S. Member, And C. Chakraborty, “Dual Stator Winding Induction Machine: Problems, Progress, And Future Scope,” IEEE Transactions on Industrial Electronics Vol. 62, No. 7, pp. 4641–4652, 2015, doi:10.1109/TIE.2015.2409800.
  22. A. Khedher and M. Faouzi, “Sensorless-Adaptive DTC of Double Star Induction Motor,” Energy Convers. Manag., Vol. 51, No. 12, Pp. 2878–2892, 2010, doi: https://doi.org/10.1016/j.enconman.2010.06.028
  23. B. M. Chandra and A. Pradesh, “Study of Performace of Dual Stator Induction Motor,” International Journal of Computational Intelligence in Control, Vol. 13, No. 2, Pp. 729–736, 2021.
  24. R. Bogoi, F. Farina, F. Profumo, A. Tenconi, “Dual-Three Phase Induction Machine Drives Control - A Survey,” IEEJ Transactions on Industry Applications, Vol. 126, Issue 4, pp. 420–429. 2006 doi:10.1541/ieejias.126.420
  25. F. J. T. E. Ferreira, “Novel Multiflux, Three-Phase, Dual-Winding Configurations,” 2018 XIII International Conference on Electrical Machines (ICEM), Alexandroupoli, Greece, 2018, pp. 2511-2518, Doi: 10.1109/Icelmach.2018.8507066.
  26. H. Keshtkar, “Improved Design of a Dual Stator Winding Induction Generator for Wind Power Applications,” 2016 24th Iranian Conference on Electrical Engineering (ICEE), Shiraz, Iran, pp. 1278–1283, 2016, doi: 10.1109/IranianCEE.2016.7585718
  27. R. Reghu, A. V. Vidyapeetham, And V. Venkataraman, “Design and Implementation of Brushless Doubly Fed Induction Machine with New Stator Winding Configuration,” Wind Engineering Journal, Vol. 45 No.1, 2019, Doi: 10.1177/0309524x19868423.
  28. M. A. Khoshhava, H. A. Zarchi, And G. R. A. Markadeh, “Optimal Design of a Dual Stator Winding Induction Motor with Minimum Rate Reduction Level,” IEEE Transactions on Industrial Electronics Vol. 68, No. 1, pp. 1016 - 1024, 2020, Doi: 10.1109/Tie.2020.2967690.
  29. K. Hatua and V. T. Ranganathan, “A Novel Vsi- And Csi-Fed Dual Stator Induction Motor Drive Topology for Medium-Voltage Drive Applications,” IEEE Transactions on Industrial Electronics Vol. 58, No. 8, pp. 3373–3382, 2011. doi:10.1109/TIE.2010.2081958
  30. F. Bu, W. Huang, Y. Hu, And K. Shi, “An Excitation-Capacitor-Optimized Dual Stator-Winding Induction Generator with The Static Excitation Controller for Wind Power Application,” IEEE Transactions on Energy Conversion Vol. 26, No. 1, pp. 122–131, 2011. doi:10.1109/TEC.2010.2072509.
  31. V. Chandrasekaran, T. Manigandan “Double Winding induction motor- an approach for improvement of Power Factor and Efficiency,” European Journal of Scientific Research, Vol. 66, No. 2, pp.262-273, 2011.
  32. A. R. Muñoz and T. A. Lipo, “Dual Stator Winding Induction Machine Drive,” IEEE Transactions on Industry Applications, Vol. 36, No. 5, pp. 1369–1379, 2000.
  33. D. Hadiouche, H. Razik, And A. Rezzoug, “On The Design of Dual-Stator Windings for Safe Vsi Fed Ac Machine Drives,” Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248), Chicago, IL, USA, 2001, pp. 1123-1130 vol.2,, doi: 10.1109/IAS.2001.955624
  34.  M. Cheng and P. Han, “A Dual-Stator Brushless Doubly-Fed Induction Motor for EV / HEV Applications”. 2014 International Conference on Intelligent Green Building and Smart Grid (IGBSG), Taipei, Taiwan, 2014, pp. 1-6, doi: 10.1109/IGBSG.2014.6835258.
  35. Z. Heidari, H. Gorginpour, And M. Shahparasti, “Optimal Electromagnetic-Thermal Design of a Seven-Phase Induction Motor for High-Power Speed-Control Applications", “international journal of science & technology, Vol. 29, Issue 5, pp. 2480–2497, 2022, Doi: 10.24200/Sci.2021.54766.4028.
  36. H. Chen, J. Zhao, H. Wang, Q. Zhang, X. Luo, And H. Xu, “Multi-Objective Optimum Design of Five-Phase Squirrel Cage Induction Motor by Differential Evolution Algorithm,” Energy Reports, Vol. 8, Pp. 51–62, 2022, Doi: 10.1016/J.Egyr.2022.09.098.
  37. K. Pienkowski, “Analysis and Control of Dual Stator Winding Induction Motor,” Archives of Electrical Engineering, Vol. 61, No. 3, pp. 421–438, 2012, Doi: 10.2478/V10171-012-0033-Z.
  38.  I. Tamrakar, “power factor correction of induction motors using PWM inverter fed auxiliary stator winding,” IEEE transactions on energy conversion, vol. 14, no. 3, pp. 426–432, 1999, , doi: 10.1109/60.790892
  39. S. Basak, S. Member, C. Chakraborty, And B. C. Pal, “A New Configuration of Dual Stator Induction Generator Employing Series and Shunt Capacitors,” IEEE transactions on energy conversion, Vol. 8969, No. C, Pp. 1–10, 2017, doi:
  40. R. Bojoi, A. Tenconi, F. Reofumo, G. Griva, D. Martinello, “Complete Analysis And Comparative Study of digital modulation Techiques for Dual Three Phase AC motor Drives,” 2002 IEEE 33rd Annual IEEE Power Electronics Specialists Conference. Proceedings (Cat. No.02CH37289), Cairns, QLD, Australia, 2002, pp. 851-857 vol.2, doi: 10.1109/PSEC.2002.1022560
  41. M. Jagiela, X. Wang, R. A. Mcmahon, And T. Garbiec, “Time‐harmonic field‐circuit model for brushless doubly fed induction machine,” IET Electric Power Applications, original research,Vol.17, Issue 7, Pp. 965-975, 2023, Doi: doi.org/10.1049/elp2.12317
  42. A. R. Soman, S. Madaan, S. Gupta, A. Singh, And V. Yadav, “Performance Analysis of Dual Stator Induction Motor,” International Research Journal of Engineering and Technology, Volume: 05 Issue: 05 Pp. 1969–1973, 2018.
  43. P. R. Burande, “Simulation of 3-Phase 2- Stator Induction Motor Using Matlab Platform,” International Journal of Applied Engineering Research, Vol. 13, No. 11, Pp. 9437–9441, 2018.
  44. R. Sardar and P. A. R. Soman, “Multispeed Operation of Dual Stator Winding Induction Motor,” IJSRSET, Vol. 2, No. 2, Pp. 994–999, 2016.
  45. A. R. Soman, “Variation in Torque of Dswim by Just Changing Voltage Keeping Speed Constant,” Asian Journal of Convergence in Technology, Vol. V, No. I, Pp. 1–4, 2019.
  46. F. Bu, Y. Hu, W. Huang, And S. Zhuang, “Parameter Design and Static Performance of Dual Stator-Winding Induction Generator Variable Frequency Ac Generating System with Inductive and Capacitive Loads,” IEEE transactions on industrial electronics, Vol. 61, No. 8, Pp. 3902–3914, 2014, doi: 10.1109/TIE.2013.2286571
  47. M. Haussmann, J. Weigold, W. Wondrak, M. Doppelbauer, D. Ag, And T. Hpc, “Characterization of Dual Stator Induction Machines,” 32nd Electric Vehicle Symposium, Pp. 1–8, 2019.
  48. M. Haussmann, C. Kloeffer, J. Weigold, W. Wondrak, M. Doppelbauer, And D. Ag, “Parameter Identification of a Dual Stator Induction Machine,” 2017 19th European Conference on Power Electronics and Applications (EPE'17 ECCE Europe), Warsaw, Poland, 2017, pp. P.1-P.10, doi: 10.23919/EPE17ECCEEurope.2017.8099250
  49. R. Bojoi, F. Farina, G. Griva, F. Profumo, S. Member, And A. Tenconi, “Direct Torque Control for Dual Three-Phase Induction Motor Drives,” IEEE transactions on industry applications, Vol. 41, No. 6, Pp. 1627–1636, 2005, doi: 10.1109/TIA.2005.858281
  50.  A. Boglietti Et Al., “Efficiency Analysis of Pwm Inverter Fed Three-Phase and Dual Three-Phase Induction Machines,” Conference Record of the 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting, Tampa, FL, USA, 2006, pp. 434-440, doi: 10.1109/IAS.2006.256557
  51. A. Boglietti, S. Member, R. Bojoi, A. Cavagnino, And A. Tenconi, “Efficiency Analysis of Pwm Inverter Fed Three-Phase and Dual Three-Phase High Frequency Induction Machines for Low / Medium Power Applications,” IEEE transactions on industrial electronics, Vol. 55, No. 5, Pp. 2015–2023, 2015, doi: 10.1109/IAS.2006.256557
  52. K. Houari, A. Massoum, And A. Meroufel, “Dual Star Induction Motor Drive: Modelling, Supplying and Control,” International Journal of Electrical and Power Engineering, vol. 5, No. 1, 2011.
  53.  D. Hadiouche, H. Razik, S. Member, And A. Rezzoug, “On The Modeling and Design of Dual-Stator Windings to Minimize Circulating Harmonic Currents for Vsi Fed Ac Machines,” IEEE transactions on industry applications, Vol. 40, No. 2, Pp. 506–515, 2004, doi: 10.1109/TIA.2004.824511
  54. O. Rabiaa, B. H. Mouna, D. Mehdi, And S. Lassaad, “Modeling of A Dual-Three-Phase Induction Motor Including the Effect of Stator Mutual Leakage Inductance,” 2017 International Conference on Green Energy Conversion Systems (GECS), Hammamet, Tunisia, 2017, pp. 1-5 2017, doi: 10.1109/GECS.2017.8066131
  55. G. Renukadevi and K. Rajambal, “Generalized D-Q Model of N-Phase Induction Motor,” International Journal of Electrical and Computer Engineering, Vol. 6, No. 9, Pp. 1066–1075, 2012.
  56. J. M. Guerrero and O. Ojo, “Total Air-Gap Flux Minimization in Dual Stator Winding Induction Machines,” 2008 Twenty-Third Annual IEEE Applied Power Electronics Conference and Exposition, Austin, TX, USA, 2008, pp. 1132-1138, doi: 10.1109/APEC.2008.4522864
  57. A. S. O. Ogunjuyigbe, T. R. Ayodele, And B. B. Adetokun, “Engineering Science And Technology, An International Journal Modelling And Analysis Of Dual Stator-Winding Induction Machine Using ComplexVector Approach,” Eng. Sci. Technol. An Int. J., Vol. 21, No. 3, pp. 351–363, 2018.
  58. Y. Zhao, T. A. Lipo, “Space Vector PWM Control of Dual Three-phase Induction Machine Using Vector Space Decomposition”, IEEE transactions on industry applications, Vol. 31, No. 5, 1995, doi: 10.1109/28.464525
  59. R. Gregor, F. Barrero, S. L. Toral, And M. J. Duran, “Realization of an Asynchronous Six-Phase Induction Motor Drive Test-Rig Realization of an Asynchronous Six-Phase Induction Motor Drive Test-Rig,” RE&PQJ, Vol. 1, No. 6, 2008.
  60. B. S. Marwa, “Modeling and Analysis of Double Stator Induction Machine Supplied by A Multi-Level Inverter,” IEEE, No. 9, Pp. 269–272, 2012, doi: 10.1109/MELCON.2012.6196430
  61. Y. Bensalem and M. N. Abdelkrim, “Modeling and Simulation of Induction Motor Based On Finite Element Analysis,” IJPEDS, Vol. 7, No. 4, Pp. 1100–1109, 2016.
  62.  R. H. Nelson, P. C. Krause, “Induction Machine Analysis for Arbitrary Displacement Between Multiple Winding Sets”, in IEEE Transactions on Power Apparatus and Systems, vol. PAS-93, no. 3, pp. 841-848, May 1974, doi: 10.1109/TPAS.1974.293983
  63. M. B. Fredj, M. B. Slimene, M. A. Khlifi, H. Rehaoulia, “Study of Association of Dual Stator Winding Induction Machine,” IJESRT, Vol. 5, No. 4, Pp. 85–92, 2016.
  64. A. Rehaoulia, H. Rehaoulia, and F. Fnaiech “Double Star Induction Machine Modelling: Impact of The Stator Mutual Leakage Inductance", international journal of applied electromagnetics and machine, vol. 53, no. 1, pp. 51-61, 2017, doi: 10.3233/JAE-150160
  65. D. Nascimento, I. Automatyki, And L. Wan, “Electromagnetic Fields On 3-Phase Induction Motor Using Finite Element Analysis,” 2021 IEEE International Joint EMC/SI/PI and EMC Europe Symposium, Raleigh, NC, USA, 2021, pp. 434-439, doi: 10.1109/EMC/SI/PI/EMCEurope52599.2021.9559357.
  66. B. S. Marwa and B. F. Mouldi, “Dual Stator Induction Motor Operation from Two Pwm Voltage Source Inverters” 2013 International Conference on Electrical Engineering and Software Applications, Hammamet, Tunisia, 2013, pp. 1-4, doi: 10.1109/ICEESA.2013.6578383
  67. L. Alberti, N. Bianchi, And S. Member, “Experimental Tests of Dual Three-Phase Induction Motor Under Faulty Operating Condition,” IEEE Transactions on Industrial Electronics, Vol. 59, No. 5, Pp. 2041–2048, 2012, doi: 10.1109/TIE.2011.2171175
  68. Kaneo Takaku, “Computer Aided Analysis of a Twin Stator Induction Motor”, Conference Record of the IEEE Industry Applications Society Annual Meeting,, San Diego, CA, USA, 1989, pp. 289-294 vol.1, doi: 10.1109/IAS.1989.96666
  69. E. Nakamae, H. Yamashita, K. Kaneda, Y. Ohnogi, K.Kagawa, “Noiseless Variable-Speed Siquirrel Cage Induction Motor”, IEEE transactions on energy conersion, Vol. 5, No. 2, Pp. 380–385, 1990, doi: 10.1109/60.107236
  70. N. Chilakapati, “Investigation of Doubly Fed Twin Stator Induction Motor As A Variable Speed Drive,” 1998 International Conference on Power Electronic Drives and Energy Systems for Industrial Growth, 1998. Proceedings., Perth, WA, Australia, 1998, pp. 160-165 Vol.1, doi: 10.1109/PEDES.1998.1330007.
  71. B. H. Band and A. D. Ingole, “Transfer of Power by Using Two Induction Machines,” IJCESR Conference, No. 8, Pp. 36–40, 2017.
  72. A. Pugachev, And A. Kosmodamianskiy, “Two Induction Motors Electric Drive With Rotatory Stator,” Journal of Electrical Engineering, vol. 16, no. 4, Pp. 54-60, 2016.
  73. L. Bu Et Al., “A New Energy Recovery Double Winding Cage-Rotor,” IEEE transactions on energy conversion, Vol. 18, No. 2, Pp. 315–320, 2003, doi: 10.1109/TEC.2003.811736
  74. M. Sowmiya and S. H. Thilagar, “Design and Performance Analysis of a Dual Stator Multiphase Induction Motor Using Finite Element Method,” Indian Academy of Sciences, Vol. 46, ID. 67, 2021. https://doi.org/10.1007/s12046-021-01603-6
Statistics
Article View: 501
PDF Download: 181


Journal Management System. Powered by iJournalPro.com