Circulating power analysis in dual-input planetary gear mechanisms employed in in-wheel motor-driven electrical vehicles

Kareem, Gaidaa Shaker; Esmail, Essam Lauibi

doi:10.30772/qjes.2024.146323.1102

	Circulating power analysis in dual-input planetary gear mechanisms employed in in-wheel motor-driven electrical vehicles
Al-Qadisiyah Journal for Engineering Sciences
Article 14, Volume 18, Issue 2, June 2025, Pages 211-220 PDF (9.67 M)
Document Type: Research Paper
DOI: 10.30772/qjes.2024.146323.1102
Authors
Gaidaa Shaker Kareem^* ; Essam Lauibi Esmail
Department of Mechanical Engineering, College of Engineering, University of Al-Qadisiyah, Diwaniyah, 58001, Iraq.
Abstract
Electric vehicles (EVs) are known for their power efficiency and lower pollution levels compared to traditional vehicles. The design of dual-motor EV systems, utilizing planetary gear trains, is a significant area of research. The impact of power circulation on losses in novel and patented planetary gear mechanisms has not been extensively explored in previous configuration design studies, despite its importance as a key component of the mechanism. Accurately understanding the power distribution in a dual-motor system seems to be crucial for fully comprehending an invention. This paper explores the positive aspects and drawbacks of PGT configuration, with a focus on efficiency, which may affect competitiveness in real-world applications. If power flow estimation is not possible or if operating constraints prevent it, it is likely that the patent was not thoroughly examined or the inventor lacked experience in the subject matter. A nomograph is a graphical tool used to analyze the relationships between variables in power-split systems, including power flow and efficiency. A systematic approach is proposed for evaluating the performance and power loss of PGTs. Analytical formulas for powers, losses, and efficiency are derived. A parametric study on a wheel hub motor reveals that a higher gear ratio enhances efficiency and performance, with power flow analysis indicating power circulation and amplification. Controlling gear ratios precisely can change power flow direction, enhancing efficiency. Criteria for no power circulation are established, leading to a new configuration.
Keywords
Nomogragh; two input; Gear ratio; velocity ratio; Power flow; power losses

References
H. Kwon, Y. Choi, W. Choi, and S. Lee, “Multimode dual-motor electric vehicle system for eco and dynamic driving,” Results in Engineering, vol. 19, p. 101298, 2023. [Online]. Available: https://doi.org/10.1016/j.rineng.2023.101298 F. Alanazi, “Electric vehicles: Benefits, challenges, and potential solutions for widespread adaptation,” Applied Sciences, vol. 13, no. 10, 2023. [Online]. Available: https://doi.org/10.3390/app13106016 Z. Wang, J. Zhou, and G. Rizzoni, “A review of architectures and control strategies of dual-motor coupling powertrain systems for battery electric vehicles,” Renewable and Sustainable Energy Reviews, vol. 162, p. 112455, 2022. [Online]. Available: https://doi.org/10.1016/j.rser.2022.112455 H. Liu, J. Zhao, T. Qing, X. Li, and Z. Wang, “Energy consumption analysis of a parallel phev with different configurations based on a typical driving cycle,” Energy Reports, vol. 7, pp. 254–265, 2021. [Online]. Available: https://doi.org/10.1016/j.egyr.2020.12.036 H. Kwon, Y. Choi, W. Choi, and S. Lee, “A novel architecture of multimode hybrid powertrains for fuel efficiency and sizing optimization,” IEEE Access, vol. 10, pp. 2591–2601, 2022. [Online]. Available: https://doi.org10.1109/ACCESS.2021.3139029 A. Garc´ıa and J. Monsalve-Serrano, “Analysis of a series hybrid vehicle concept that combines low temperature combustion and biofuels as power source,” Results in Engineering, vol. 1, p. 100001, 2019. [Online]. Available: https://doi.org/10.1016/j.rineng.2019.01.001 G. Mantriota and G. Reina, “Dual-motor planetary transmission to improve efficiency in electric vehicles,” Machines, vol. 9, no. 3, 2021. [Online]. Available: https://doi.org/10.3390/machines9030058 J. Wu, X. Hong, G. Feng, and Y. Zhang, “Seamless mode shift control for a new simpson planetary gearset based dual motor powertrain in electric vehicles,” Mechanism and Machine Theory, vol. 178, p. 105056, 2022. [Online]. Available: https://doi.org/10.1016/j.mechmachtheory.2022.105056 J. Wu, J. Liang, J. Ruan, N. Zhang, and P. Walker, “Efficiency comparison of electric vehicles powertrains with dual motor and single motor input,” Mechanism and Machine Theory, vol. 128, pp. 569–585, 2018. [Online]. Available: http://hdl.handle.net/10453/131752 T. Wu, F. Wang, and P. Ye, “Regenerative braking strategy of dual-motor ev considering energy recovery and brake stability,” World Electric Vehicle Journal, vol. 14, no. 1, 2023. [Online]. Available: https://doi.org/10.3390/wevj14010019 C. kai Wen, S. li Zhang, B. Xie, Z. he Song, T. hui Li, F. Jia, and J. gang Han, “Design and verification innovative approach of dual-motor power coupling drive systems for electric tractors,” Energy, vol. 247, p. 123538, 2022. [Online]. Available: https://doi.org/10.1016/j.energy.2022.123538 A. Hussein Juber, E. L. Esmail, and T. N. Ali, “Graph representation of planetary gear trains: A review,” Al-Qadisiyah Journal for Engineering Sciences, vol. 14, no. 4, pp. 220–224, 2021. [Online]. Available: https://doi.org/10.30772/qjes.v14i4.893 H. A. Nafeh and E. Lauibi Esmail, “Genetically compatible graphs for planetary gear train synthesis,” Al-Qadisiyah Journal for Engineering Sciences, vol. 15, no. 1, pp. 9–17, 2022. [Online]. Available: https://doi.org/10.30772/qjes.v15i1.807 X. Xu, J. Chen, Z. Lin, Y. Qiao, X. Chen, Y. Zhang, Y. Xu, and Y. Li, “Optimization design for the planetary gear train of an electric vehicle under uncertainties,” Actuators, vol. 11, no. 2, 2022. [Online]. Available: https://doi.org/10.3390/act11020049 X. Xu, J. Liang, Q. Hao, P. Dong, S. Wang, W. Guo, Y. Liu, Z. Lu, J. Geng, and B. Yan, “A novel electric dual motor transmission for heavy commercial vehicles,” Automotive Innovation, vol. 4, no. 1, 2021. [Online]. Available: https://doi.org/10.1007/s42154-020-00129-7 N.-T. Hoang and H.-S. Yan, “On the innovation design for twomotor transmissions with eight-link mechanisms in the electric vehicles,” Applied Sciences, vol. 9, no. 1, 2019. [Online]. Available: https://doi.org/10.3390/app9010140 NSK’s Website. [Online]. Available: http://www.nsk.com/company/ne ws/2017/press0119a.html K. Deepak, M. A. Frikha, Y. Benˆomar, M. El Baghdadi, and O. Hegazy “In-wheel motor drive systems for electric vehicles: State of the art, challenges, and future trends,” Energies, vol. 16, no. 7, 2023. [Online]. Available: https://doi.org/10.3390/en16073121 X. Yang, Y. Shao, L. Wang, W. Yu, N. Yue, and W. Du, “Configuration design of dual-input compound power-split mechanism for in-wheel motor-driven electrical vehicles based on an improved lever analogy method,” Journal of Mechanical Design, vol. 143, no. 10, p. 104501, 04 2021. [Online]. Available: https://doi.org/10.1115/1.4050653 G. White, “Epicyclic gears from early hoists and winches—ii,” Mechanism and Machine Theory, vol. 29, no. 2, pp. 309–325, 1994. [Online]. Available: https://doi.org/10.1016/0094-114X(94)90038-8 B.-S. Kim, J.-J. Park, and J.-B. Song, “Double actuator unit with planetary gear train for a safe manipulator,” Proceedings 2007 IEEE International Conference on Robotics and Automation, pp. 1146–1151, 2007. [Online]. Available: https://doi.org/10.1109/ROBOT.2007.363139 D. Rabindran and D. Tesar, “Power flow analysis in parallel force/velocity actuators (pfva): Theory and simulations,” Volume 2: 32nd Mechanisms and Robotics Conference, Parts A and B, pp. 983–992, 08 2008. [Online]. Available: https://doi.org/10.1115/DETC2008-49164 F. Zhu, L. Chen, and C. Yin, “Scheme design and optimal selection for hev planetary gear coupling mechanism,” Volume 6: ASME Power Transmission and Gearing Conference; 3rd International Conference on Micro- and Nanosystems; 11th International Conference on Advanced Vehicle and Tire Technologies, pp. 943–949, 08 2009. [Online]. Available: https://doi.org/10.1115/DETC2009-86716 K.-B. Sheu, “Analysis and evaluation of hybrid scooter transmission systems,” Applied Energy, vol. 84, no. 12, pp. 1289–1304, 2007. [Online]. Available: https://doi.org/10.1016/j.apenergy.2006.10.004 J. Kim, N. Kim, S. Hwang, Y. Hori, and H. Kim, “Motor control of input-split hybrid electric vehicles,” International Journal of Automotive Technology, vol. 10, p. 733–742, 2009. [Online]. Available: https://doi.org/10.1007/s12239-009-0086-1 F. Zhang, H. Liu, Y. Hu, and J. Xi, “A supervisory control algorithm of hybrid electric vehicle based on adaptive equivalent consumption minimization strategy with fuzzy pi,” Energies, vol. 9, no. 11, 2016. [Online]. Available: https://doi.org/10.3390/en9110919 H. A. Hussen, E. L. Esmail, and R. A. Hussen, “Power flow simulation for two-degree-of-freedom planetary gear transmissions with experimental validation,” Modelling and Simulation in Engineering, vol. 2020, no. 1, p. 8837605, 2020. [Online]. Available: https://doi.org/10.1155/2020/8837605 X. Zhao and P. Maißer, “A novel power splitting drive train for variable speed wind power generators,” Renewable Energy, vol. 28, no. 13, pp. 2001–2011, 2003. [Online]. Available: https://doi.org/10.1016/S0960-1481(03)00127-7 E. L. Esmail, “Nomographs for synthesis of epicyclic-type automatic transmissions,” Meccanica, vol. 48, p. 2037–2049, 2013. [Online]. Available: https://doi.org/10.1016/S0960-1481(03)00127-7 E. L. Essam, “Influence of the operating conditions of two-degreeof- freedom planetary gear trains on tooth friction losses,” Journal of Mechanical Design, vol. 140, no. 5, p. 054501, 03 2018. [Online]. Available: https://doi.org/10.1115/1.4039452
Statistics Article View: 447 PDF Download: 555