- All Journals
- Al-Qadisiyah University
- Basrah University
- Kirkuk University
- Mosul University
- The Iraqi Borad for Medical Specialization
- University of Anbar
- University of Technology
- Al Mustafa University
- Al-Zahraa University for Women
- Alnoor University
- Kunooz University
- Misan University
- Ninevah University
- Tikrit University
- University of Al-Hamdaniya
- University of Kerbala
Comparing and Evaluating the Effect of Different Thickness of Two Metal-Free Restoration on Fracture Resistance in Molar Implant Prosthesis | ||
| Tikrit Journal for Dental Sciences | ||
| Volume 9, Issue 2, December 2021, Pages 97-103 PDF (488.57 K) | ||
| DOI: 10.25130/tjds.9.2.5 | ||
| Authors | ||
| Elaf jamal Harb* 1; Sabiha Mahdi Kanaan2 | ||
| 1(1)Postgraduate student in Prosthetic Dental Technology | ||
| 2(2)Asst. Prof., Department of Prosthetic Dental Technology | ||
| Abstract | ||
| Aim: The objectives of this article was to determine the minimum thickness of two monolithic materials for a posterior implant prosthesis. Materials and methods sixty monolithic IPS E.MAX CAD and zirconia crowns with different occlusal thicknesses were made with the use of a computer-aided design/computer-aided manufacturing technique was divided into 3 experimental groups: group (1) 0.5 mm group (2) 0.7mm group (3)1mm. A universal testing machine was used to determine the fracture load value. The restoration was loaded until fracture; the fracture resistance was registered. Two-way ANOVA has been used to examine the data., followed by the least significant difference LSD test. One-way ANOVA variance analysis was used to examine the differences in fracture load of monolithic zirconia or IPS E.MAX CAD at various thicknesses (p=0.05). Results vertical load test revealed that the fracture resistance of monolithic zirconia higher than the lithium disilicate crown (E.MAX CAD). The results showed that the highest mean value of fracture load test was obtained in the ice zirconia translucent with 1mm thickness group (1880N), while the lowest mean value was in the E.MAX CAD with thickness 0.5mm Group (223N). Conclusions: The fracture resistance of CAD-CAM monolithic crowns is influenced by the occlusal thickness. zirconia prosthesis with occlusal thickness 0.7mm,1mm had a high fracture resistance when compared with E.MAX CAD. | ||
| Keywords | ||
| Fracture resistance; IPS E.MAX CAD; monolithi | ||
|
Statistics Article View: 348 PDF Download: 128 |
||